ABRANET

ABRANET

The multifunctional and classic Abranet is especially developed for sanding putty, primers, lacquers, composite materials and a wide range of other materials for industrial use. Abranet combines high performance and a longer lifespan than traditional abrasives, making it a cost-effective solution. Designed for dry sanding by machine or by hand, its true dust-free sanding characteristics result in a cleaner work environment, as well as a better surface finish.
ABRANET HD

ABRANET HD

Abranet HD achieves outstanding results on the most challenging surface conditioning and repair applications such as paint stripping and coarse putty sanding. Abranet HD has a nylon mesh backing material (in contrast to paper) to create a more flexible and durable abrasive product which produces a more consistent surface finish more quickly. Designed for optimum performance in wet and dry modes, it features exceptional resistance to edge wear and clogging which means it retains its high efficiency sanding properties for far longer, especially in demanding situations. It’s also manufactured using an environmentally friendly, solvent-free coating.
ABRALON

ABRALON

Abralon is a unique, multifunctional sanding material developed for tackling both smooth and profiled surfaces. Its patented, flexible construction allows it to create a smooth sanding pattern on angled surfaces and edges while minimizing the risk of pressure marks. The flexible weave also allows water and air to pass freely, making it suitable for both dry and wet sanding, by machine or by hand.
ABRALON J3

ABRALON J3

Abralon J3 is a unique multifunctional Abralon abrasive for an ultrafine surface finish for both smooth and profiled surfaces. J3 has a higher density foam layer which is only 3 mm thick. Recommended for high gloss applications, leaving a very smooth surface prior to polish. Abralon J3 is suitable for all kinds of material, both smooth and profiled surfaces. Its flexible weave allows water and air to pass freely, suitable for both dry and wet sanding.
ABRALON J5

ABRALON J5

Abralon J5 is a unique, multifunctional Abralon abrasive for an ultrafine surface finish. J5 has a higher density foam layer which is 5 mm thick. Removes minor defects and flattens the surface for a superior finish. Suitable for all kinds for material, both smooth and profiled surfaces. The flexible weave allows water and air to pass freely, suitable for both dry and wet sanding.
ALOX

ALOX

Combining durability with flexibility, Alox is well suited to sanding by hand. With its excellent cutting qualities, this is an all-round sanding material that produces a high quality surface finish.
COARSE CUT

COARSE CUT

A specially reinforced backing material and Mirka’s Progressive Bond™ dust-binding technology, make Coarse Cut ideal for all kinds of coarse sanding work. Features include, flexibility on rounded surfaces, excellent edge wear resistance and minimal clogging.
FIBER CER

FIBER CER

Durable and flexible Fiber discs has firm dust binding properties, which is needed when removing lacquer and rust or when sanding down welding seams.
FIBER CER XF870

FIBER CER XF870

Durable and flexible Fiber discs has firm dust binding properties, which is needed when removing lacquer and rust or when sanding down welding seams.
FIBER ZIR

FIBER ZIR

Durable and flexible Fiber discs has firm dust binding properties, which is needed when removing lacquer and rust or when sanding down welding seams. Fiber Zir is specially developed for high-pressure sanding.
MIRKON

MIRKON

A tough and durable sanding material, Mirkon is perfectly suited to the aggressive machine sanding of metal. Thanks to its polyester based cloth material it's highly durable and can take plenty of tough treatment. It's also very aggressive for calibration sanding.
MIRLON

MIRLON

Thanks to its special structure, Mirlon is a flexible, three-dimensional fibre sanding material that’s easy to use on profiled surfaces and produces an excellent finish. It’s ideal for matting of surfaces and creates an excellent base for the next lacquer layer.
MIRLON TOTAL

MIRLON TOTAL

Developed using Mirka’s innovative Total Coating™ Technology, Mirlon Total is more aggressive than Mirlon and produces a dense scratch pattern and rapid result. Suitable for use in wet and dry modes, it features an open and flexible structure and strengthened fibres which make it strong and long-lasting.
NOVASTAR

NOVASTAR

Novastar is a premium film abrasive that tackles demanding applications with unexpected ease. It has a mix of ceramic and aluminium oxide grains on a flexible film backing, with a precision coating that practically repels dust. The grains stay sharp as clogging is prevented. Great durability and excellent edge wear resistance. Dust extraction optimised with multihole pattern. Fully waterproof. Novastar delivers remarkable results, especially on hard surfaces. Outstanding performance makes it the ideal film abrasive choice for professionals in any industry.
WPF

WPF

WPF is the recommended product for manual wet sanding of plastics, lacquers and composite materials. The product features a latex-impregnated paper backing material and extra durable coating which helps produce a high quality finish, even on coarser surfaces. The range also includes small corrective sanding discs and roses used for spot repair. P3000 is available as corrective sanding discs only.
WPF NEXT GEN.

WPF NEXT GEN.

WPF Next Gen is the ideal paper abrasive for effective hand sanding both wet and dry on multiple surfaces. It is very flexible, fully waterproof and has great grain adhesion. Produced with new coating technology, the abrasive surface does not clog up easily, so you can sand faster and the abrasive lasts longer. Especially recommended for automotive refinishing due to the consistent surface finish. The finer grits are optimal for fresh clear coats and make polishing easier.