ABRANET

ABRANET

The multifunctional and classic Abranet is especially developed for sanding putty, primers, lacquers, composite materials and a wide range of other materials for industrial use. Abranet combines high performance and a longer lifespan than traditional abrasives, making it a cost-effective solution. Designed for dry sanding by machine or by hand, its true dust-free sanding characteristics result in a cleaner work environment, as well as a better surface finish.
ABRANET ACE

ABRANET ACE

Abranet Ace is developed to achieve outstanding results on challenging surface conditioning and repair applications. Because of its optimzed net construction and ceramic grains, Abranet Ace offers superior cut and performance for hardwoods (such as beech and oak) and fast cutting on various solid surface materials as well as for cleaning of different industrial rollers. Abranet Ace also works excellent on primer sanding applications.
ABRANET ACE HD

ABRANET ACE HD

Abranet Ace HD is durable and tough with ceramic grains. The strong net structure resists high wear and tear and the product is ideal for heavy-duty applications. The improved woven mesh backing increases the lifetime of the abrasive, and makes the sanding process faster. Abranet Ace HD for dust-free sanding has coarse grits P40, P60 and P80.
ABRANET NS

ABRANET NS

Abranet NS, a multifunctional net abrasive without stearate. A combination of high performance and a longer lifespan than traditional abrasives gives a cost-effective solution. Abranet NS is excellent for cleaning of different industrial rollers.
ABRANET SOFT

ABRANET SOFT

Abranet Soft is a combination of a multifunctional net abrasive and a thin foam layer. The foam layer and open structure provide flexibility that allows the material to easily follow surface contours and minimises clogging. Since dust collects in the foam layer during sanding, the result is a smooth surface finish. Abranet Soft is suitable for pre-polishing lacquered surfaces, while coarser grits can be used for intermediate sanding of lacquered wooden surfaces by hand. Recommended for wet sanding.
ABRANET NC

ABRANET NC

Abranet NC has been developed for sanding of material that must not be contaminated with corrosive agents. The preparation of corrosion sensitive surfaces requires abrasive products which contain the lowest possible amount of heavy metals. Special procedures are applied throughout the production process of Abranet NC to reduce the metal content and ensure consistent quality. Due to the construction, Abranet NC has significantly lower heavy metal content than the corresponding traditional products. Abranet NC is suitable for sanding of aluminium and painted aluminium parts within the automotive.
ABRALON

ABRALON

Abralon is a unique, multifunctional sanding material developed for tackling both smooth and profiled surfaces. Its patented, flexible construction allows it to create a smooth sanding pattern on angled surfaces and edges while minimizing the risk of pressure marks. The flexible weave also allows water and air to pass freely, making it suitable for both dry and wet sanding, by machine or by hand.
ABRALON J3

ABRALON J3

Abralon J3 is a unique multifunctional Abralon abrasive for an ultrafine surface finish for both smooth and profiled surfaces. J3 has a higher density foam layer which is only 3 mm thick. Recommended for high gloss applications, leaving a very smooth surface prior to polish. Abralon J3 is suitable for all kinds of material, both smooth and profiled surfaces. Its flexible weave allows water and air to pass freely, suitable for both dry and wet sanding.
ABRALON J5

ABRALON J5

Abralon J5 is a unique, multifunctional Abralon abrasive for an ultrafine surface finish. J5 has a higher density foam layer which is 5 mm thick. Removes minor defects and flattens the surface for a superior finish. Suitable for all kinds for material, both smooth and profiled surfaces. The flexible weave allows water and air to pass freely, suitable for both dry and wet sanding.
BASECUT

BASECUT

Basecut is the economical, high-efficiency choice for sanding paper. There are a host of productivity and efficiency features, including a high initial aggressive cut and a long working lifespan which ensures it’s a cost-effective choice.
CARATFLEX

CARATFLEX

A stearate-coated abrasive for dry sanding applications, Caratflex features fine stock removal, a uniform scratch pattern, a long lifespan and extremely good grain adherence. The backing consists of a flexible, latex-impregnated paper which is ideal for profile sanding.
COARSE CUT

COARSE CUT

A specially reinforced backing material and Mirka’s Progressive Bond™ dust-binding technology, make Coarse Cut ideal for all kinds of coarse sanding work. Features include, flexibility on rounded surfaces, excellent edge wear resistance and minimal clogging.
ECOWET

ECOWET

Ecowet is ideal for manual wet sanding of lacquered surfaces between coats as well as for fixing defects in the lacquer. Ecowet is also suitable for removal of orange peel structure and for spot mark repair. The use of a sanding block is recommended, in order to obtain a smooth surface with a smooth sanding pattern.
FIBER A

FIBER A

Durable and flexible Fiber discs has firm dust binding properties, which is needed when removing lacquer and rust or when sanding down welding seams. Fiber A is specially developed for effective working on metal surfaces
GOLD

GOLD

This durable, all-round sanding material is very well suited for high speed sanding in a multitude of applications. Gold features semi-open and special stearate coatings designed to prevent clogging and pill forming which helps achieve an optimal sanding result.
GOLD NC

GOLD NC

Gold NC has been developed for sanding of material that must not be contaminated with corrosive agents. The preparation of corrosion sensitive surfaces requires abrasive products which contain the lowest possible amount of heavy metals. Special procedures are applied throughout the production process of Gold NC to reduce the metal content. The tough, latex-coated base paper makes Gold NC a balanced, flexible product with good initial aggressivity and good durability. Gold NC has a surface layer of calcium stearate that provides good clogging resistance when sanding aluminium and when sanding other materials with high clogging tendency. Gold NC is suitable for sanding of aluminium and painted aluminium parts within the automotive industry.
GOLD SOFT

GOLD SOFT

Gold Soft is a sanding disc, with optimal foam thickness. The semi-open grain coating minimises dust clogging and gives better cutting performance. The soft backing gives an excellent paint finish. A softer disc edge eliminates damages on profile sanding. Gold Soft P500 is suitable for primer sanding applications and P800 for matting clear coats.
GOLDFLEX SOFT

GOLDFLEX SOFT

The soft and flexible Goldflex Soft has been developed for sanding profiled surfaces and irregular, difficult-to-reach details by hand. Goldflex Soft is especially useful within the automotive industry and the car repair branch. The foam base is grip friendly and applies pressure evenly, which reduces the risk of sanding through the surface. The special stearate coating prevents clogging. Suitable for both dry and wet sanding.
HIOLIT JF

HIOLIT JF

Hiolit JF is a new cloth backed product targeted towards wood and metal sanding applications. The product has a flexible backing making it optimal for profile sanding, seams, edges and other applications where a flexible product with high edge wear is needed. The semi-open coating makes the product universal and especially suited for soft and clogging materials.
IRIDIUM

IRIDIUM

Iridium is a premium paper abrasive for universal sanding. Perfected for speed and efficiency, it has a mix of ceramic and aluminium oxide grains on a flexible paper with precision coating that prevents clogging and reduces pilling. It practically repels dust and lifetime is increased as the grains stay sharp for longer. Dust extraction is optimised with multihole patterns for discs and strips. Iridium delivers amazing results on both soft and hard surfaces, making it the ideal paper abrasive choice for professionals in any industry.
MICROSTAR

MICROSTAR

A general-purpose abrasive film product, designed for matting and paint rectification of top- and clear coat applications. Microstar has a special stearate layer and a smooth film backing. This product has a high quality finish and lasts longer as it doesn’t clog as easily as traditional products. Microstar produces a fine scratch pattern that is easy to polish out. For a perfect result, it is recommended to use Microstar with a 5 mm interface pad. Microstar is intended for dry sanding only.
MIRLON

MIRLON

Thanks to its special structure, Mirlon is a flexible, three-dimensional fibre sanding material that’s easy to use on profiled surfaces and produces an excellent finish. It’s ideal for matting of surfaces and creates an excellent base for the next lacquer layer.
MIRLON  NC

MIRLON NC

Mirlon NC is a product in the Mirlon family and can be used for matting of aluminium and painted aluminium parts. The product can be used wet as well as dry. Mirlon NC is a grain-coated non-woven product suitable for both hand sanding and machine sanding in processes where the sanded material must not become contaminated by corroding agents. Thanks to the three-dimensional construction and the high flexibility the product is easy to use on rounded surfaces and profiles.
MIRLON TOTAL

MIRLON TOTAL

Developed using Mirka’s innovative Total Coating™ Technology, Mirlon Total is more aggressive than Mirlon and produces a dense scratch pattern and rapid result. Suitable for use in wet and dry modes, it features an open and flexible structure and strengthened fibres which make it strong and long-lasting.
NOVASTAR

NOVASTAR

Novastar is a premium film abrasive that tackles demanding applications with unexpected ease. It has a mix of ceramic and aluminium oxide grains on a flexible film backing, with a precision coating that practically repels dust. The grains stay sharp as clogging is prevented. Great durability and excellent edge wear resistance. Dust extraction optimised with multihole pattern. Fully waterproof. Novastar delivers remarkable results, especially on hard surfaces. Outstanding performance makes it the ideal film abrasive choice for professionals in any industry.
NOVASTAR SR

NOVASTAR SR

The Novastar SR spot repair disc is a unique finessing solution, made with a new manufacturing technology which enables a precise grain distribution and thus a consistent scratch pattern. They are easy to use, with minimal loading and pilling. These durable, flexible and long-lasting discs gives an excellent surface finish, making the polishing faster and easier.
POLARSTAR

POLARSTAR

Especially developed to efficiently tackle the latest demanding coating applications, Polarstar quickly produces a fine, consistent surface finish and combines that with superb durability due to an excellent resistance to clogging. The polyester film backing material creates a more flexible and much smoother abrasive surface, compared to paper backing. In particular, it offers outstanding performance on hard tooling gel coats and scratch-resistant clear coats.
POLARSTAR SR

POLARSTAR SR

Polarstar SR is the first in a series of high-technology micro products produced by Mirka. This innovative curing technology is energy-saving with a low carbon footprint. This film abrasive is mainly developed for spot repair, used at car plants in the finessing- and hospital area of the paint shops. The Polarstar SR products are also used in the automotive refinish processes. This product is primarily designed for wet sanding, for correction of small painting defects and removal of dust particles in top coats and clear coats. Suitable for both machine and hand sanding.
POLARSTAR SR SIC

POLARSTAR SR SIC

Polarstar SR5 silicone carbide is a high-technology micro product produced by Mirka. This innovative curing technology is energy-saving with a low carbon footprint. This abrasive film is mainly developed for spot repair, used at car plants in the finessing- and hospital area of the paint shops. The Polarstar SR5 SIC film abrasive is also used in the automotive refinishing processes. This product is primarily designed for wet sanding, for correction of small painting defects and removal of dust particles in top coats and clear coats. Suitable for both machine and hand sanding.
Q.SILVER

Q.SILVER

With a backing consisting of a flexible and strong impregnated latex paper, Q-Silver features optimal aggressivity, resulting in fast and efficient stock removal. The high heat endurance of this fully resin bonded abrasive makes it ideal for tough tasks, such as 'down-to-metal' sanding operations.
Q.SILVER ACE

Q.SILVER ACE

Q.Silver Ace is a ceramic premium abrasive with paper backing for tougher universal sanding. The ceramic grains give a boost, especially when sanding harder applications and a strong resin bonding gives good grip adhesion to the backing.
WGN

WGN

WGN is an all-round non-branded abrasive produced by Mirka to be used as well on lacquers and paints as on wood and fillers. The tough, latex coated base paper makes WGN a balanced, flexible product with good initial aggressivity and good durability. The full resin bonding and the even, semi-open special treated aluminium oxide grain coating provide a constant stock removal resulting in an excellent surface finish. The special surface structure guarantees good clogging resistance also when sanding materials with higher clogging tendency.
WPF

WPF

WPF is the recommended product for manual wet sanding of plastics, lacquers and composite materials. The product features a latex-impregnated paper backing material and extra durable coating which helps produce a high quality finish, even on coarser surfaces. The range also includes small corrective sanding discs and roses used for spot repair. P3000 is available as corrective sanding discs only.
WPF

WPF

Mirka Waterproof corrective sanding discs and roses for wet sanding plastics, lacquers and composite materials providing a high-quality sanding finish.
WPF

WPF

WPF is the recommended product for manual wet sanding of plastics, lacquers and composite materials. The product features a latex-impregnated paper backing material and extra durable coating which helps produce a high quality finish, even on coarser surfaces. The range also includes small corrective sanding discs and roses used for spot repair. P3000 is available as corrective sanding discs only.
WPF NEXT GEN.

WPF NEXT GEN.

WPF Next Gen is the ideal paper abrasive for effective hand sanding both wet and dry on multiple surfaces. It is very flexible, fully waterproof and has great grain adhesion. Produced with new coating technology, the abrasive surface does not clog up easily, so you can sand faster and the abrasive lasts longer. Especially recommended for automotive refinishing due to the consistent surface finish. The finer grits are optimal for fresh clear coats and make polishing easier.