This 5 m hose for Mirka hand sanding blocks can be connected to existing Mirka dust extraction hose assemblies. The hose is conductive, which leads the sparks from static electricity (common in hand sanding) to the grounded dust extractor.

Preassembled 4m hose with connector and CE 230V cable in a durable sleeve. The sleeve makes handling easier and protects the work surface from scratches. Designed to be used with Mirka® DEROS, Mirka® DEOS and Mirka® LEROS.

Preassembled 10m hose and CE 230V cable in a 3,5m durable sleeve. The sleeve makes handling easier and protects the work surface from scratches. The part of the hose and cable not covered by the sleeve is held together by hook and loop straps. Connector is included. Designed to be used with Mirka® DEROS, Mirka® DEOS and Mirka® LEROS.

When fixed on a Mirka 20 mm dust extraction hose, this connector enables a quick and smooth change of the hose from one Mirka hand sanding block to another.

Connector for air + electric hoses with threads. This adapter is close to the dust extractor, where the pneumatic tube/electrical cable comes out. The adapter comes with the following hoses: MIE6514511, MIE6514711, 8992514511, 8992514711 and 8992515011.

Connector for air + electric hoses. Comes with the following hoses: MIE6514511, MIE6514711, 8992514511, 8992514711 and 8992515011.

This conductive adapter enables a quick change between Mirka power tools with 19/20 mm dust extraction fittings, e.g. Mirka OS383CV. Fix this adapter on each tool and connect/disconnect to/from any Mirka hose assembly.

Dust extraction hose with integrated electric cable. The extended length (10 m) gives more possibilities for movability. This hose is designed to be used with Mirka® DEROS, Mirka® DEOS and Mirka® LEROS (EU-plug versions).

A Clean-Up Kit for Dust extractors. Hose and connector are not included in this kit. Suitable hose with a connector included would be MIN6519411 (4m) or MIN6519211 (10m).
Adaptér + hadice 27 x 0,5 m

Adaptér + hadice 27 x 0,5 m

Tato hadice s adaptérem je vhodná pro všechny pneumatické brusky Mirka.
Adaptér pro Deco Sander

Adaptér pro Deco Sander

Adapter for different hand sanding tools for connecting to dust extractor.
Adaptér pro hoblíky 20/28 mm

Adaptér pro hoblíky 20/28 mm

A 20/28 mm soft adapter, used with dust extraction hoses. Due to the softness, the adapter is easy to attach to the hand sanding block.
Antistatická odsávací hadice 28 mm x 10 m + adaptér

Antistatická odsávací hadice 28 mm x 10 m + adaptér

A flexible 10m long suction hose, connecting the sander and the dust extractor, including a connector, making it easy to setup a system with a 10 m hose and cable. Please note that this hose is conical. The benefit of having a conical dust extractor hose is that it improves the dust suction.
Antistatická odsávací hadice 28 mm x 4 m + adaptér

Antistatická odsávací hadice 28 mm x 4 m + adaptér

A flexible 4m long suction hose, connecting the sander and the dust extractor, including a connector. Please note that this hose is conical. The benefit of having a conical dust extractor hose is that it improves the dust suction.
Antistatická prodlužovací hadice 32 mm x 10 m

Antistatická prodlužovací hadice 32 mm x 10 m

Toto prodloužení hadice může být připojeno k hadici MIN6519411, pokud z této hadice bude odstraněn gumový adaptér. Hadici nelze připojit přímo k brusce Mirka CEROS. Hadice je válcovitá a má stejný průměr po celé své délce 10 m.
Čisticí sada pro

Čisticí sada pro

A clean-up kit with a brush nozzle for dust extractors. The brush nozzle makes the kit more versatile. The dimension of the hose is 34/40 mm (outer diameter) x 4 m and the length for the stainless steel tubes is 500 mm x 2.
Díl č. 3 odsávací hadice MIRO, 4 m

Díl č. 3 odsávací hadice MIRO, 4 m

Elektrická hadice CE 230 V, 32 mm x 5,5 m

Elektrická hadice CE 230 V, 32 mm x 5,5 m

Odsávací hadice s integrovaným elektrickým kabelem. Hadice je vhodná pouze pro verzi DEROS s elektrickou zástrčkou. Prodloužená délka 5,5 m umožňuje lepší manipulaci a pohyblivost.
Hadice MPA0412, 1,8 m, pro samoodsávání

Hadice MPA0412, 1,8 m, pro samoodsávání

Hadice pro domácí použití 20 mm x 4 m

Hadice pro domácí použití 20 mm x 4 m

Hose for hand sanding blocks.
Odsávací hadice 415/915 32 mm x 10 m

Odsávací hadice 415/915 32 mm x 10 m

This Pneumatic Hose Assembly is 10m long, and can be directly connected to all our pneumatic CV machines.
Odsávací hadice 415/915 32 mm x 5,5 m

Odsávací hadice 415/915 32 mm x 5,5 m

This Pneumatic Hose Assembly is 5,5m long, ergonomic and has a weight of 1850 grams only. It has high flexibility and is fully conductive. This hose can be directly connected to all our pneumatic CV machines.
Otočný adaptér na hadici 20/20 mm

Otočný adaptér na hadici 20/20 mm

Tento adaptér umožňuje propojit dvě hadice Ø 20 mm (vnější průměr).