Adapter for Vacuum Hose/Coaxial 1.25" ID, 1/Pkg

Connector for air + electric hoses. Electrical conductive (≤ 10⁶ Ω/square). Comes with the following hoses: MIE6514511, MIE6514711, 8992514511, 8992514711 and 8992515011.

AOS Boot and Clamp Kit for 130NV, 1/Pkg

AOS-B Quick Lock Plate Assembly, 1/Pkg

AOS-B Spindle Bearing Kit, 1/Pkg

AROS-B, 5.0mm Housing, 1/Pkg

Backing Pad 9" 25H Grip LEROS + 8 screws

Backing pad 225mm designed for Mirka® LEROS 950CV. This backing pad is endowed with both grips and screws, for maximal attachment of the interface. Recommended to be used together with an interface (MIW9534611) and best combined with Abranet net sanding abrasive for a smooth and fast surface finish.

Backing Plate for DEOS 3x5", 1/Pkg

Backing Plate Screw Kit, 1/Pkg

Backup Pad 1.25" Grip Soft Twist Lock, 10/Pkg

Backup Pad 1.25" PSA Hard Twist Lock, 10/Pkg

Backup Pad 1.25" PSA Soft Twist Lock, 10/Pkg

Backup Pad 1.25" PSA Soft, 5/Pkg

Backup Pad 3" x .25" Grip Medium,1/Pkg

Backup Pad 3"x5" Grip 46H (for DEOS 353), 1/Pkg

Backup Pad 3"x5" Grip 54H (for MR-35SGV), 1/Pkg

Backup Pad 3"x8" Grip 48H (for DEOS 383), 1/Pkg

Backup Pad 3"x8" Grip 56H, 1/Pkg

Backup Pad 4"x6"x6" Grip 32H Medium, 1/Pkg

Backing pad suitable for the Mirka® DEOS Delta sander.

Backup Pad 5" Grip 28H 130g, 1/Pkg

Backup Pad 5" Grip 28H, 1/Pkg

Backup Pad 6" Grip 48H 130g, 1/Pkg

Backup Pad 8" Grip 89H, 1/Pkg

Balancing Housing Screw Kit, 1/Pkg

Balancing Weight for DEOS 3x5", 1/Pkg

Bearing Kit for DEOS, 1/Pkg

Brake Seal for LEROS, 1/Pkg

Button Plate for LEROS, 1/Pkg

Connector for Air+Elec Hoses with threads, 1/Pkg

Connector for air and electric hoses with threads. This adapter is close to the dust extractor, where the pneumatic tube/electrical cable comes out. Electrical conductive (≤ 10⁶ Ω/square). The adapter comes with the following hoses: MIE6514511, MIE6514711, 8992514511, 8992514711 and 8992515011.

Cover Cap Kit for LEROS, 1/Pkg

Cover Plate for DEROS/DEOS, 1/Pkg

Cylinder & O-Ring Kit MPA2593, 1/Pkg

DEROS 550,625,650,680 Housing, 1/Pkg

DEROS Housing 325/350, 1/Pkg

Dust Hose Kit for LEROS, 1/Pkg

Electronic Board 110-120V for DE-1230-PC, 1/Pkg

End Cap for LEROS, 1/Pkg

Fairing cover for LEROS, 1/Pkg

Fairing for LEROS, 1/Pkg

Fan 5mm/100g Pad DEROS 125mm, 1/Pkg

Fan 5mm/130g Pad DEROS 150mm, 1/Pkg

Fan Cover for LEROS, 1/Pkg

Fan for LEROS, 1/Pkg

Front Endplate MPB0016, 1/Pkg

Gap Filler .12" (3 mm) for LEROS, 1/Pkg

Ground Wire for DEROS, 1/Pkg

Handle left for LEROS, 1/Pkg

Handle right for LEROS, 1/Pkg

Handle Screw Kit for LEROS, 1/Pkg

Hatch Door Frame Kit for DE-1230, 1/Pkg

HEPA Filter Cover Kit for DE-1230, 1/Pkg

The HEPA Filter Cover for DE 1230/1242 is necessary to keep the HEPA filter (Mirkacode 8999100711) in place.

HEPA Filter Element for DE-1230, 1/Pkg

The HEPA (High Efficiency Particulate Air) filter can be installed in addition to the standard filter to improve the filtration. By adding this filter you will get a triple filtration: 1. Fleece dust bag 2. Standard main filter 3. HEPA filter. Please note that adding this filter will not make a dust extractor DE 1230 an H-class extractor, even though the filter itself fulfills HEPA class H13 requirements.

Hole Screw Kit for LEROS, 8/Pkg

Hose Connector for LEROS, 1/Pkg

Intelligent Battery BPA 10850 10.8V 5.0Ah, 1/Pkg

Interface Pad 9" 25H for Mirka LEROS, 1/Pkg

Joint Ring for LEROS, 1/Pkg

Joint Screw Kit for LEROS, 1/Pkg

Lever 5mm for DEROS, 1/Pkg

Mirka Case T-LOC 15.7 x 11.8 x 6.2", 1/Pkg

Splash and dust resistant case: a sturdy storage solution that is easy to pack and move to the next work site. The case protects the tool and prolongs its lifetime. The connectable case system keeps tools and equipment organized and in one place. Hight 158mm.

Motor 3mm for AOS-B, 1/Pkg

Motor 5mm for AROS-B, 1/Pkg

Motor 5mm/100g Pad DEROS X 110V, 1/Pkg

Motor 5mm/30g Pad for DEROS 350X 110V, 1/Pkg

Motor Assembly for DE-1230 110V, 1/Pkg

Motor Assembly for LEROS X, 1/Pkg

Motor for 5mm/130g DEROS X 110V, 1/Pkg

Motor for DEOS 110V, 1/Pkg

O-Ring Set for LEROS, 1/Pkg

OS CV Swivel Fitting Kit .75" MPA1239, 1/Pkg

OS Mini Pad Support MPC0018, 1/Pkg

OS Pad Backing MPB0101, 1/Pkg

OS Screw Kit for Backing Pads MPA1672, 1/Pkg

OS Spindle Bearing Kit MPA0806, 1/Pkg

OS353, OS383 Bearing Kit MPA0802, 1/Pkg

Pad screw 12 x 1.25mm for LEROS, 1/Pkg

Pad Screw Kit for DEOS, 1/Pkg

Pad Support for DEOS machines, 2/Pack

PCB Screw Kit for LEROS, 1/Pkg

PCB Spacer Kit for LEROS, 1/Pkg

Power Socket Assembly Kit for LEROS, 1/Pkg

PROS Air Inlet Kit, 1/Pkg

PROS Balancing Screw Kit, 1/Pkg

PROS Cover, 1/Pkg

PROS CV Connector, 1/Pkg

PROS CV, DB Swivel Fitting Kit, 1/Pkg

PROS Cylinder, Spring Pin and O-Ring Kit, 1/Pkg

PROS Endplate Bearing Kit, 1/Pkg

PROS Hose 5.9' MPP9023, 1/Pkg

1,8m long dust suction hose and pneumatic cable. Suitable for Mirka PROS 550DB and 650DB. (Mirka code: 8995550211 and 8995650211)

PROS Housing and Mark Plate Kit, 1/Pkg

PROS Lever Kit 5mm Orbit/12000 RPM, 1/Pkg

PROS Lock Ring & O-Ring Kit, 1/Pkg

PROS Muffler Connect and O-Ring Kit, 1/Pkg

PROS Muffler Kit 12,000 RPM, 1/Pkg

PROS Rotor Vanes & Key Kit, 1/Pkg

PROS Shaft Balancer Kit 5mm/6", 1/Pkg

PROS Speed Valve Kit, 1/Pkg

PROS Spindle & Bearing Assembly, 1/Pkg

PROS/DEROS MPP0321 5"/6" Brake Seal, 1/Pkg

PROS/DEROS Spindle, 1/Pkg

PROS/ROS Pad Wrench .94"(24mm), 1/Pkg

Pushlock Washer 10mm for DEOS, 1/Pkg

Rear Endplate MPB0017, 1/Pkg

Rewireable Connector HP-9R US, 1/Pkg

ROP2 Spindle Bearing Kit MPA2304, 1/Pkg

ROS Air Inlet Kit MPA0798, 1/Pkg

ROS CV Swivel Fitting 1"(28mm) MPA0988, 1/Pkg

ROS Cylinder+O-Ring Kit MPA0994, 1/Pkg

ROS Endplate Bearing Kit MPA0799, 1/Pkg

ROS Exhaust Adapter MPC0108, 1/Pkg

ROS Housing 81x133mm MPA0227, 1/Pkg

ROS Housing MPA0244, 1/Pkg

ROS Lever Kit MPA0983, 1/Pkg

ROS Lever Kit MPA0984, 1/Pkg

ROS Lock Ring+O-Ring Kit MPA0993, 1/Pkg

ROS Muffler Kit MPA0797, 1/Pkg

ROS Muffler Kit MPA0805, 1/Pkg

ROS Pad Backing MPC0115, 1/Pkg

ROS Pad Wrench .67"(17mm) MPA0146, 1/Pkg

ROS Retainer+O-Ring Kit MPA2551, 1/Pkg

ROS Rotor, Vanes and Key kit MPA0801, 1/Pkg

ROS Shaft Balancer Kit MPA0980, 1/Pkg

ROS Shroud MPC0073, 1/Pkg

ROS Speed Valve kit MPA0800, 1/Pkg

ROS Spindle 1/4"/3" MPB0083, 1/Pkg

ROS Spindle Bearing Kit MPA0804, 1/Pkg

ROS Spindle MPB0018, 1/Pkg

ROS Swivel Fitting Kit .75"(19mm) MPA0858, 1/Pkg

ROS Swivel Fitting Kit 1.1"(28mm) MPA0932, 1/Pkg

ROS Under Bearing Set MPA0807, 1/Pkg

ROS Vac Adapter 1.4"/1.1"(36/29mm) MPB0065, 1/Pkg

ROS Vacuum Shroud MPC0012, 1/Pkg

ROS2 Air Inlet Kit MPA2216, 1/Pkg

ROS2 Housing Seal Kit MPA2531, 1/Pkg

ROS2 Muffler Kit MPA2214, 1/Pkg

ROS2 Rotor, Vanes & Key kit MPA2220, 1/Pkg

ROS2 Screw Kit MPA2734, 1/Pkg

ROS2 Speed Valve Kit MPA2218, 1/Pkg

ROS2 Spindle Bearing Kit 5"/6" MPA2186, 1/Pkg

ROS2 Spindle Bearing Kit for 8" MPA2625, 1/Pkg

ROS2 Spindle MPB0208, 1/Pkg

ROS2 Vacuum Endcap Kit MPA2222, 1/Pkg

RP2 Wrench .51"(13mm) MPA0145, 1/Pkg

Rubber Mount for AOS-B, 1/Pkg

Screw Kit Fairing for LEROS, 1/Pkg

Screw Kit for DEROS/DEOS, 1/Pkg

Screw Kit Motor for LEROS, 1/Pkg

Screw Kit Y-Branch for LEROS, 1/Pkg

Seal for DEOS 353/383, 1/Pkg

Soft Ring for AROS-B, 1/Pkg

Speed Controller DEROS/DEOS X 110V, 1/Pkg

Speed Controller for LEROS, 1/Pkg

Spindle Bearing Dual Seal Kit 5"/6", 1/Pkg

Spindle Bearing Kit for AROS-B, 1/Pkg

Spindle Bearing Kit MPA2226, 1/Pkg

Start Button Kit for DEROS/DEOS, 1/Pkg

Swivel Exhaust for DEROS 125/150mm, 1/Pkg

Swivel Exhaust Kit for DEOS 353/383, 1/Pkg

Vacuum Filter Element for MV-912, 1/Pkg

Dust Extractor filter for Mirka MV-912

Vacuum Hose Adapter 1.25"/2.12", 1/Pkg

Hose adapter Ø 32/54 mm for Mirka dust extractors. The adapter connects the hose into the dust extractor. Electrical conductive (≤ 10⁶ Ω/square). Delivered together with the following hoses: MIE6514511 / MIE6514511US, MIE6514711 / MIE6514711US,MIN6519411, MIN6519711, 8992514511, 8992514711 and 8992515011.

Vacuum Motor Cooling Filter Kit for MV-912, 1/Pkg

Y-Branch Base for LEROS, 1/Pkg

Y-Branch Top for LEROS, 1/Pkg