Using Mirka’s abrasives

Simple Steps to Perform a Better Profile Sanding Finish

1/2 - Step 1

Start sanding

Start hand sanding with either Goldflex Soft P150-P320 grit or Mirlon® Total VF 360 strips to remove imperfections in the surface. The worse the surface, the coarser the abrasive grit starting point must be. If the surface is in better shape, we recommend you start with a finer grit.

If you are unsure which abrasive to choose, compare the abrasives listed on this page.

2/2 - Step 2

Apply pressure

Apply pressure into the profiles:

  • Press Mirlon Total VF 360 into the profiles until you have reached the desired result.
  • If you choose Goldflex Soft you can start sand with P150, continue applying the base coat and intermediate sand with P320.
  • If you are using a coarser grit than 240, we recommend you to apply base coating and sand between the steps.