Post Paint Process with Mirka Galaxy
1/5 - Step 1
Post Paint Process with Mirka® Galaxy
The finer grits of the new Mirka Galaxy work especially well in rectifying imperfections in automotive refinishing. In a post-paint process, working together with fine Mirka Abralon grits and Mirka Polarshine compounds, you can go for a true high-quality finish.
Watch this instructional video for a post-paint process or check it step by step.
2/5 - Step 2
Clear Coat Sanding
Fit an interface onto the sander backing pad.
Start sanding the clearcoat with Galaxy 1500 grit. Keep speed at 7000 rpm.
3/5 - Step 3
Sand the surface structure
Sand the surface structure to a required level. Wipe the surface clean.
4/5 - Step 4
Damp Sanding with Mirka® Abralon
Move to damp sanding the surface with Mirka Abralon.
Use Abralon® J3 in 3000 grit. Spray water on both the abrasive and the surface. Sand at 7000rpm. Wipe the surface clean when you are done.
Note: Remember to turn off the dust extractor when damp sanding.
5/5 - Step 5
Polishing
Use a Mirka ARP-B 300NV or Mirka AROP-B 312NV for the polishing stage.
Apply Polarshine® 20 on a Mirka Golden Finish Pad 1. Polish at 1500rpm.
Then, apply Polarshine® 5 on a Golden Finish Pad 2 for a finer polish.
Finally, wipe the surface with a microfiber cloth to remove remains of compound.