Backing Pad 125mm 5/16" Grip 5H Medium

Backing pad medium for grip discs.

Backing Pad 125mm 5/16" Grip Medium

125mm backing pad for grip discs. No holes and medium hard.

Backing Pad 150mm 5/16" Grip 15H Medium

Backing pad medium for grip discs. This backing pad fits Mirka’s 6 H, 6 + 1 H, 8 + 1 H and 15 H discs.

Backing Pad 150mm 5/16" Grip 6H Medium

Backing pad medium for grip discs.

Backing Pad 150mm 5/16" Grip 6H Soft

Soft Backing pad for grip discs.

Backing Pad 150mm 5/16" PSA 6H Medium

Backing pad medium for PSA discs.

Backing Pad 150mm 5/16" PSA Medium

Backing pad medium no hole for PSA discs.

Backing Pad 32mm PSA Soft, 5/Pack

Female no hole PSA soft backing pad with an even surface.

Backing Pad 70x198mm Grip 56H Medium

Grip backing pad for orbital sanders. Delivered with one pad protector and user instructions.

Backing Pad 77mm 1/4" Grip 6H Medium

Backing pad for 77mm grip discs. 6H and medium hard. This backing pad is delivered with a pad saver including user instructions.

Backing Pad 77mm 1/4" Grip Medium

Backing pad for 77mm grip discs. No holes and medium hard.

Backing Pad 77mm 5/16" Grip Medium

Suitable only for the pneumatic sander Mirka® OS 310.

Backing Pad 81x133mm Grip 54H Medium

Grip backing pad for pneumatic orbital sanders. Delivered with one pad protector and user instructions.

Backing Pad Net 125mm 5/16" Grip 28H 130g Medium

Fits all Mirka® 150 mm (6”) sanders. This 130g backing pad gives you the ability to switch sizes and use 125 mm (5”) sanding discs.

Backing Pad Net 125mm 5/16" Grip 28H Medium

A 125 mm backing pad with a central air inlet. The air channels leading to the center of the backing pad has an increased air flow and therefore the dust is removed efficiently. This backing pad is suitable for our multihole configuration 125 mm (5”) 17H, available in the Gold product range. This backing pad can also can be used on Festo (8+1H), Bosch (8H) and Black & Decker machines.

Backing Pad Net 125mm 5/16" Grip 44H Medium

Backing pad medium for Abranet discs. Delivered with a pad protector and user instructions.

Backing Pad Net 125mm 5/16" Grip 44H Soft

Soft Backing pad for Abranet discs.

Backing Pad Net 150mm 5/16" Grip 48H Medium

A 150 mm (6”) backing pad with a central air inlet. The air channels leading to the center of the backing pad has an increased air flow and therefore the dust is removed efficiently.

Backing Pad Net 150mm 5/16" Grip 51H Med

Backing pad medium for net discs. Delivered with a pad saver and user instructions.

Backing Pad Net 150mm 5/16" Grip 52H Soft

Soft Backing pad for Abranet discs.

Backing Pad Net 200mm Grip 89H Medium for ROS2 850

This 200 mm (8 in.) Net Backing Pad with 89 holes is unique and designed only for MIRKA ROS2-850CV two-handed randon orbital sander.

Backing Pad Quick Lock 32mm Grip Soft, 10/Pack

Quick Lock pad 32mm Grip soft. Suitable for Mirka® ROS 150NV, Mirka® AOS 130NV, Mirka® AOS-B 130NV and Mirka® AROS-B 150NV sanders

Backing Pad Quick Lock 32mm PSA Hard, 10/Pack

Backing Pad with Quick Lock. Suitable for Mirka® ROS 150NV, AOS 130NV, AOS-B 130NV and AROS-B 150NV sanders.

Backing Pad Quick Lock 32mm PSA Soft, 10/Pack

Quick Lock pad 32mm PSA soft. Suitable for Mirka® ROS 150NV, Mirka® AOS 130NV, Mirka® AOS-B 130NV and Mirka® AROS-B 150NV sanders

Backing Pad UNI 150mm 5/16"+ M8 Grip 57H Medium

Uni-Backing Pad for grip discs. Delivered with one Pad Protector and user instructions. This pad is suitable for Festool Multi-Jetstream system.

Backing Pad UNI 150mm 5/16"+ M8 Grip 61H Hard

Abranet hard density Unipad 150 mm (6") for all hole combinations. This Abranet unipad is optimized for flat surfaces and has a high edge durability. 15 larger holes allow use of conventional discs with 6 h, 6 + 1 h, 9 h and 15 h. Suitable for narrow shroud machines but not recommended to be used with 150 mm ROS machines, because the combination of Unipad + wide/Abranet shroud machines does not give the optimal dust extraction. Delivered with one 150 mm (6") pad saver. To ensure correct installation, always use the supplied spacing washers, making sure that a minimum gap exists between the sander’s shroud and the top part of the backing pad, to prevent friction between the two parts. Tighten the screw hard. The backing pad should never turn idle. From time to time, check that the screw is well tight.

Backing Pad UNI 150mm 5/16"+ M8 Grip 61H Medium

Abranet medium density Unipad 150 mm (6") for all hole combinations. This Abranet unipad is optimized for flat surfaces and has a high edge durability. 15 larger holes allow use of conventional discs with 6 h, 6 + 1 h, 9 h and 15 h. Suitable for narrow shroud machines but not recommended to be used with 150 mm ROS machines, because the combination of Unipad + wide/Abranet shroud machines does not give the optimal dust extraction. Delivered with one 150 mm (6") pad saver. To ensure correct installation, always use the supplied spacing washers, making sure that a minimum gap exists between the sander’s shroud and the top part of the backing pad, to prevent friction between the two parts. Tighten the screw hard. The backing pad should never turn idle. From time to time, check that the screw is well tight.

Sanding Plate Base 225mm Grip 16H for MIRO

Sanding plate base 225 mm for MIRO 955/955S dry wall sanders.