ABRANET NC

ABRANET NC

Abranet NC has been developed for sanding of material that must not be contaminated with corrosive agents. The preparation of corrosion sensitive surfaces requires abrasive products which contain the lowest possible amount of heavy metals. Special procedures are applied throughout the production process of Abranet NC to reduce the metal content and ensure consistent quality. Due to the construction, Abranet NC has significantly lower heavy metal content than the corresponding traditional products. Abranet NC is suitable for sanding of aluminium and painted aluminium parts within the automotive industry.
ABRALON

ABRALON

Abralon is a unique, multifunctional sanding material developed for tackling both smooth and profiled surfaces. The patented, flexible construction allows it to create a smooth sanding pattern on angled surfaces and edges while minimizing the risk of pressure marks. The flexible weave allows water and air to pass freely, resulting in a cleaner sanding process and a long lasting abrasive. Recommended for fine sanding of profiled surfaces and for finishing prior to polishing. Recommended to use wet.
ABRALON J3

ABRALON J3

Abralon J3 is a unique multifunctional Abralon abrasive for an ultrafine surface finish for both smooth and profiled surfaces. Abralon J3 has a higher density foam layer which is only 3 mm thick. Recommended for high gloss applications, leaving a very smooth surface prior to polish. Abralon J3 is suitable for all kinds of material, both smooth and profiled surfaces. The flexible weave allows water and air to pass freely, and makes it suitable for both dry and wet sanding.
ALOX

ALOX

Combining durability with flexibility, Alox is well suited for hand sanding. An all-round abrasive with excellent cutting qualities, that gives a high quality surface finish.
GOLD NC

GOLD NC

Gold NC has been developed for sanding of material that must not be contaminated with corrosive agents. The preparation of corrosion sensitive surfaces requires abrasive products which contain the lowest possible amount of heavy metals. Special procedures are applied throughout the production process of Gold NC to reduce the metal content. The tough, latex-coated base paper makes Gold NC a balanced, flexible product with good initial aggressivity and good durability. Gold NC has a surface layer of calcium stearate that provides good clogging resistance when sanding aluminium and when sanding other materials with high clogging tendency. Gold NC is suitable for sanding of aluminium and painted aluminium parts within the automotive industry.
MIRLON  NC

MIRLON NC

Can be used for matting of aluminium and painted aluminium parts. It can be used wet as well as dry. Mirlon NC is a grain-coated non-woven abrasive, suitable for both hand sanding and machine sanding in processes where the sanded material must not become contaminated by corroding agents. Thanks to the three-dimensional construction and the high flexibility the Mirlon NC is easy to use on rounded surfaces and profiles.