เกี่ยวกับเมอร์กา
เครื่องมือไฟฟ้า
การลงทะเบียนรับประกัน
สถานที่ติอต่อและจัดจำหน่าย
Thailand
Mirka Asia Pacific Head Office
ติดต่อเรา
CONTENT
Abrasives
ผลิตภัณฑ์
Polish
Accessories
SpareParts
Solutions
อุปกรณ์เสริม
เครื่องมือ
การขัดเงา
ผลิตภัณฑ์กระดาษทราย
ผลิตภัณฑ์กระดาษทราย
ตามวัสดุ
อลูมีเนียม
Close
Menu
ทำด้วยตนเอง
Net Sanding Range
ตามรูปแบบ
Discs
Rolls
Sheets
Strips
Triangles
ตามกลุ่ม
กรรมวิธีการผลิตไม้
กรรมวิธีการผลิตโลหะ
กรรมวิธีการผลิตวัสดุผสม
การทำสีรถ
การผลิตรถยนต์
ทำด้วยตนเอง
สีและตกแต่ง
อุตสาหกรรมเดินเรือ
ตามวัสดุ
AC laquer
Ash
Beech
Birch
Ceramics
Clear Coat
Composites
Dupont Corian
Gel coat
Glass
Karonia Mistral
L.G. Himacs
Mahogany
MDF / HDF
Melamine
Oak
Pine
Polyester High Gloss
Polystyrene
Polyurethane
Polyurethane High Gloss
Samsung Staron
Teak
Titanium carbide
Top Coat
UV High Gloss
UV Primer
Waterbased Primer
Waterbased Sealer
Waterbased UV sealer
Wolfram carbide
การลอก / ลบสี
ขัดทรายสี
ทองแดงผสมอัลลอย / ทองเหลือง / ทองแดง
ปูน / พุตตี้
แผ่นกระดาน
พลาสติก
ไม้เนื้อแข็ง
ไม้เนื้ออ่อน / เนื้อคล้ายเรซิ่น
ไม้อัด
ใยแก้ว
แล็คเกอร์
โลหะนอกกลุ่มเหล็ก
วัสดุสังเคราะห์
สเตนเลส
สารเคลือบสีไม้
สีโป๊ว
หินสังเคราะห์
เหล็กกล้า
เหล็กหล่อ
เหล็กเหนียว / เหล็กคาร์บอน
อลูมีเนียม
ตามชื่อผลิตภัณฑ์
ABRANET NC
Abranet® NC has been developed for sanding of material that must not be contaminated with corrosive agents. The preparation of corrosion sensitive surfaces requires abrasive products which contain the lowest possible amount of heavy metals. Special procedures are applied throughout the production process of Abranet NC to reduce the metal content and ensure consistent quality. Due to the construction, Abranet NC has significantly lower heavy metal content than the corresponding traditional products. Abranet NC is suitable for sanding of aluminium and painted aluminium parts within the automotive industry.
ABRALON
Abralon เป็นวัสดุขัดเอนกประสงค์สำหรับใช้ในพื้นผิวเรียบและโครงร่าง โครงสร้างยืดหยุ่นที่ได้รับสิทธิบัตรช่วยสร้างรูปแบบการขัดที่เรียบบนพื้นผิวบริเวณมุมและขอบ พร้อมทั้งลดความเสี่ยงที่จะเกิดรอบกด รูปแบบการสานที่ยืดหยุ่นช่วยให้น้ำและอากาศผ่านได้อย่างอิสระ จึงเหมาะสำหรับทั้งงานขัดแห้งและเปียก ทั้งด้วยเครื่องและด้วยมือ
ABRALON J3
Abralon® J3 is a unique multifunctional Abralon abrasive for an ultrafine surface finish for both smooth and profiled surfaces. Abralon J3 has a higher density foam layer which is only 3 mm thick. Recommended for high gloss applications, leaving a very smooth surface prior to polish. Abralon J3 is suitable for all kinds of material, both smooth and profiled surfaces. The flexible weave allows water and air to pass freely, and makes it suitable for both dry and wet sanding.
ALOX
ผสมผสานความทนทานกับความยืดหยุ่น Alox เหมาะสำหรับการขัดด้วยมือ ที่มีคุณภาพการตัดที่ยอดเยี่ยม นี่คือวัสดุสำหรับขัดที่เอนกประสงค์ซึ่งสร้างผลลัพธ์ที่มีคุณภาพสูง
GOLD NC
Gold NC has been developed for sanding of material that must not be contaminated with corrosive agents. The preparation of corrosion sensitive surfaces requires abrasive products which contain the lowest possible amount of heavy metals. Special procedures are applied throughout the production process of Gold NC to reduce the metal content. The tough, latex-coated base paper makes Gold NC a balanced, flexible product with good initial aggressivity and good durability. Gold NC has a surface layer of calcium stearate that provides good clogging resistance when sanding aluminium and when sanding other materials with high clogging tendency. Gold NC is suitable for sanding of aluminium and painted aluminium parts within the automotive industry.
JEPUFLEX ANTISTATIC
A high class abrasive with a wide application area. The focus of the optimization work has been the sanding of hard wood such as beech, birch and oak. The strong antistatic paper provides dimensionally accurate and reliable wide belts. Full resin bonding and aluminium oxide grain guarantee a very durable product. Silicon carbide grain used in the coarsest grit gives extra strength to the product. These qualities together with a well adjusted coating density make Jepuflex Antistatic a genuine all-round product that works well also on metal, plastic and lacquer.
MIRLON NC
Can be used for matting of aluminium and painted aluminium parts. It can be used wet as well as dry. Mirlon® NC is a grain-coated non-woven abrasive, suitable for both hand sanding and machine sanding in processes where the sanded material must not become contaminated by corroding agents. Thanks to the three-dimensional construction and the high flexibility the Mirlon NC is easy to use on rounded surfaces and profiles.
OSP
As the name suggests, the Optimized Surface Preparation targets the entire process and this is a decisive factor. As well as maximizing the performance of every individual phase of the process, each step has also been optimized to work perfectly with all the other steps. Mirka’s OSP abrasives are clearly marked with numbers, making it easy to know which disc or strip should be used for each step. Number 1 is used for paint removal, number 2 for feather edge, number 3 for preparing the repaired area for primer by reducing scratches and expanding the feather edge and number 4 for finalising the sanding.
By using this site you agree to the use of cookies for analytics, personalised content and ads.
X