เกี่ยวกับเมอร์กา
เครื่องมือไฟฟ้า
การลงทะเบียนรับประกัน
สถานที่ติอต่อและจัดจำหน่าย
Thailand
Mirka Asia Pacific Head Office
ติดต่อเรา
CONTENT
Abrasives
ผลิตภัณฑ์
Polish
Accessories
SpareParts
Solutions
อุปกรณ์เสริม
เครื่องมือ
การขัดเงา
ผลิตภัณฑ์กระดาษทราย
อุปกรณ์เสริม
ตามประเภท
Backing pads for sanders
Close
Menu
อื่นๆ
ชั้นแสดงสินค้าและรถเข็น
อะไหล่และอุปกรณ์เสริม
Mirka CEROS 550CV 125mm Central Vacuum Orbit 5,0
Mirka CEROS 625CV 150mm Central Vacuum Orbit 2,5
Mirka CEROS 650CV 150mm Central Vacuum Orbit 5,0
Mirka CEROS 650CV 150mm Vacuum Orbit 5,0 Case
Mirka DEROS 325CV 77mm Orbit 2,5
Mirka DEROS 350CV 77mm Orbit 5,0
เทปโฟมสำหรับงานซ่อมสี
ผงถ่านขัดแห้ง
แผ่นกันน้ำหน้าแป้น
ฟองน้ำรองหน้าแป้น
แผ่นรองหน้าแป้น
แผ่นหนุน
ตามประเภท
Backing pads for polishers
Backing pads for sanders
Displays and Trolleys
Dry Guide Coat
Hoses and adapters
Masking tapes
Polishing accessories
Power Tools Accessories
ตามชื่อผลิตภัณฑ์
Backing Pad 125mm 5/16" Grip 5H Medium
Backing pad medium for grip discs.
Backing Pad 125mm 5/16" Grip Medium
Backing Pad 150mm 5/16" Grip 6H Medium
Backing pad medium for grip discs.
Backing Pad 150mm 5/16" PSA 6H Medium
Backing pad medium for PSA discs.
Backing Pad 150mm 5/16" PSA Medium
Backing pad medium no hole for PSA discs.
Backing Pad 32mm PSA Soft, 5/Pack
Backing Pad 77mm 1/4" Grip 6H Medium
Backing Pad 81x133mm Grip 54H Medium
Backing Pad Net 125mm 5/16" Grip 44H Medium
Backing pad medium for Abranet discs. Delivered with a pad protector and user instructions.
Backing Pad Net 125mm 5/16" Grip 44H Soft
Soft Backing pad for Abranet discs.
Backing Pad Net 150mm 5/16" Grip 51H Med
Backing pad medium for net discs. Delivered with a pad saver and user instructions.
Backing Pad Net 150mm 5/16" Grip 52H Soft
Soft Backing pad for Abranet discs.
Backing Pad UNI 150mm 5/16"+ M8 Grip 61H Medium
Abranet medium density Unipad 150 mm (6") for all hole combinations. This Abranet unipad is optimized for flat surfaces and has a high edge durability. 15 larger holes allow use of conventional discs with 6 h, 6 + 1 h, 9 h and 15 h. Suitable for narrow shroud machines but not recommended to be used with 150 mm ROS machines, because the combination of Unipad + wide/Abranet shroud machines does not give the optimal dust extraction. Delivered with one 150 mm (6") pad saver. To ensure correct installation, always use the supplied spacing washers, making sure that a minimum gap exists between the sander’s shroud and the top part of the backing pad, to prevent friction between the two parts. Tighten the screw hard. The backing pad should never turn idle. From time to time, check that the screw is well tight.
By using this site you agree to the use of cookies for analytics, personalised content and ads.
X