Makinelerin Yedek Parçaları ve Aksesuarları
MIRKA AOS-B 130NV 32mm 10.8V Orbit 3.0 MIRKA AOS 130NV 32mm OSC 3,0 8500 DEVİR Mirka AP 300NV 77mm Vakumsuz MIRKA AROS-B 150NV 32mm 10.8 Orbit 5.0 MIRKA CEROS 325CV 77mm ORBIT 2,5 MIRKA CEROS 550CV 125mm ORBIT 5,0 MIRKA CEROS 625CV 150mm ORBIT 2,5 MIRKA CEROS 650CV 150mm ORBIT 5,0 MIRKA CEROS 650CV 150mm ORBIT 5,0 C/W ÇANTALI MIRKA DEOS 353CV 81x133 mm TOZ EMİŞLİ MIRKA DEOS 353CV 81x133 mm TOZ EMİŞLİ TAŞIMA KUTULU MIRKA DEOS 383CV 70x198mm TOZ EMİŞLİ Orbit 3.0 MIRKA DEOS 383CV 70x198mm TOZ EMİŞLİ TAŞIMA KUTULU MIRKA DEROS 5650CV 125/150mm ORBIT 5,0 C/W ÇANTALI MIRKA DEROS 625CV 150mm ORBIT 2,5 MIRKA DEROS 650CV 150mm ORBIT 5,0 Mirka LEROS 950CV Duvar Zımpara Makinesi 225mm Orbit 5,0 MIRKA OS 343CV 75x100mm TOZ EMİŞLİ MIRKA OS 343DB 75x100mm TOZ TORBALI MIRKA OS 353CV 81x133mm TOZ EMİŞLİ MIRKA OS 353DB 81x133mm TOZ TORBALI MIRKA OS 383CV 70x198mm TOZ EMİŞLİ MIRKA POLİSAJ MAKİNESİ PS1437 150mm MIRKA POLİSAJ MAKİNESİ PS1524 180mm MIRKA PROS 650CV 150mm ORBIT 5,0 MIRKA PROS 680CV 150mm ORBIT 8,0 MIRKA ROP2 312NV 77mm 10 000 DEVİR MIRKA ROP2 512NV 125mm 10 000 DEVİR MIRKA ROS 150NV 32mm 8000 DEVİR MIRKA ROS 325CV 77mm TOZ EMİŞLİ MIRKA ROS 325DB 77mm TOZ TORBALI MIRKA ROS 325NV 77mm MIRKA ROS 525CV 125mm ORBIT 2,5 MIRKA ROS 550CV 125mm ORBIT 5,0 MIRKA ROS 550DB 125mm TOZ TORBALI MIRKA ROS 625CV 150mm ORBIT 2,5 MIRKA ROS 625DB 150mm TOZ TORBALI 2,5 MIRKA ROS 650CV 150mm ORBIT 5,0 MIRKA ROS 650DB 150mm TOZ TORBALI MIRKA ROS2 510CV 125mm Osc. 10,0 MIRKA ROS2 550CV 125mm Osc. 5,0 MIRKA ROS2 610CV 150mm ORBIT 10,0 MIRKA ROS2 650CV 150mm ORBIT 5,0 MIRKA ROS2 850CV 200mm ORBIT 5,0 MIRKA RP 300NV 77mm 3 000 DEVİR Mirka RPS 300CV 77mm Merkezi Vakum MIRKA TOZ EMİŞ ÜNİTESİ 1025 L PC 230V MIRKA TOZ EMİŞ ÜNİTESİ 1230 L PC 230V MIRO 955-S DUVAR ZIMPARA MAKİNESİ 225mm KISA 230V
HIZLI KİLİT TABAN 32mm CIRT YUMUŞAK 10/PAKET

HIZLI KİLİT TABAN 32mm CIRT YUMUŞAK 10/PAKET

Mirka ROS 150NV zımpara ile uyumlu hızlı yapışan 32mm PSA yumuşak ped.
HIZLI KİLİT TABAN 32MM CIRT YUMUŞAK 10/Paket

HIZLI KİLİT TABAN 32MM CIRT YUMUŞAK 10/Paket

Mirka ROS 150NV zımpara ile uyumlu hızlı yapışan 32mm PSA sert ped.

NET TABAN 125mm 5/16" 44D ORTA SERTLİK

Středně tvrdý podložný talíř pro kotoučky Abranet. Dodáván s jednou ochrannou přechodkou a návodem.

NET TABAN 150mm 5/16" 51D ORTA SERTLİK

Backing pad medium for net discs. Delivered with a pad saver and user instructions.

TABAN 150mm ÇAP 5/16"

Non hole backing pad medium for grip discs.

TABAN 150mm CIRT 6D 5/16" ORTA SERTLİK

Backing pad medium for grip discs.
TABAN 75x100mm 33D

TABAN 75x100mm 33D

TABAN 77mm ÇAP 1/4" ORTA SERTLİK

TABAN 81x133mm 54D CIRT

TABAN 81x133mm 54D CIRT

UNI TABAN PEDİ 150mm 57D 5/16"+M8 ORTA

Uni-Backing Pad for grip discs. Delivered with one Pad Protector and user instructions. This pad is suitable for Festool Multi-Jetstream system.

UNIPED 150mm 61D 5/16"+M8 SERT

Abranet hard density Unipad 150 mm (6") for all hole combinations. This Abranet unipad is optimized for flat surfaces and has a high edge durability. 15 larger holes allow use of conventional discs with 6 h, 6 + 1 h, 9 h and 15 h. Suitable for narrow shroud machines but not recommended to be used with 150 mm ROS machines, because the combination of Unipad + wide/Abranet shroud machines does not give the optimal dust extraction. Delivered with one 150 mm (6") pad saver. To ensure correct installation, always use the supplied spacing washers, making sure that a minimum gap exists between the sander’s shroud and the top part of the backing pad, to prevent friction between the two parts. Tighten the screw hard. The backing pad should never turn idle. From time to time, check that the screw is well tight.