ABRANET

The multifunctional and classic Abranet is especially developed for sanding putty, primers, lacquers, composite materials and a wide range of other materials for industrial use. Abranet combines high performance and a longer lifespan than traditional abrasives, making it a cost-effective solution. Designed for dry sanding by machine or by hand, its true dust-free sanding characteristics result in a cleaner work environment, as well as a better surface finish.

ABRANET ACE

Abranet Ace is developed for tougher and more demanding sanding applications. Because of its optimised net construction and ceramic grains, Abranet Ace offers superior cut and performance for hardwoods (such as beech and oak) and fast cutting on various solid surface materials as well as for cleaning of different industrial rollers. Abranet Ace also works excellent on primer sanding applications, creating an optimal performance and lifetime.

ABRANET MAX

Abranet Max is a universal product suited for a broad variety of sanding applications and is especially developed for the wood industry. Due to the net structure it does not easily clog up on resinous wood types or soft materials and the sanded surface stays cooler and avoids burning. The tough aluminium oxide grain gives a high cut rate on harder wood types and materials. The symmetric net structure enables an efficient cut and stock removal. Lower pressure is needed and a more consistent surface finish means minimal quality variations in the process when sanding with Abranet Max. The product offers an extreme long lifetime compared to conventional abrasive belts, which results in a lower amount of belts needed for the job and also cost savings and time efficiency because of less downtime in production due to changing of belts. The product is also well suited for applications where water is used as cooling agent.

ABRANET SOFT

Abranet Soft is a combination of a multifunctional net abrasive and a thin foam layer. The foam layer and open structure provide flexibility that allows the material to easily follow surface contours and minimises clogging. Since dust collects in the foam layer during sanding, the result is a smooth surface finish. Abranet Soft is suitable for pre-polishing of lacquered surfaces, while coarser grits can be used for intermediate sanding of lacquered wooden surfaces by hand. Recommended to use wet.

ABRANET NC

Abranet NC has been developed for sanding of material that must not be contaminated with corrosive agents. The preparation of corrosion sensitive surfaces requires abrasive products which contain the lowest possible amount of heavy metals. Special procedures are applied throughout the production process of Abranet NC to reduce the metal content and ensure consistent quality. Due to the construction, Abranet NC has significantly lower heavy metal content than the corresponding traditional products. Abranet NC is suitable for sanding of aluminium and painted aluminium parts within the automotive industry.

AQUASTAR

Aquastar is an innovative and flexible film abrasive for wet hand sanding applications. It is the ultimate and user–friendly choice with excellent touch and feel. This patented abrasive has a flexible plastic-based backing, and a pattern consisting of multiple abrasive zones surrounded by interconnected channels. Polypropylene (PP) is an excellent backing material due to its flexibility, durability and watertightness avoiding the need for pre-soaking of Aquastar before use.

AQUASTAR SOFT

Aquastar Soft is a flexible pad, that follows contours, shapes and edges giving full control over the process. This abrasive possesses a unique coating pattern and a strong film backing which in combination with the foam gives super flexibility and an excellent touch to the sanding operation. Aquastar is the ultimate and user-friendly choice for hand sanding applications.

AUTONET

Specially developed for the automotive refinishing industry, Autonet is a new-age surface finishing solution offering speed, efficiency and an amazing dust extraction ability. The patented construction eliminates clogging and pilling and ensures a long lifespan, while other highlights include excellent initial aggressivity, reduced edge wear in finer grits and a versatile range to suit any application.

CARATFLEX

A stearate coated abrasive for dry sanding applications, Carat Flex features fine stock removal, a uniformed scratch pattern, a long lifespan and extremely good grain adherence. The backing consists of a flexible, impregnated latex paper which is ideal for profile sanding.

ECOWET

Ecowet is ideal for manual wet sanding of lacquered surfaces between coats, as well as for fixing defects in the lacquer. Ecowet is also suitable for removal of orange peel structure and for spot mark repair. The use of a sanding block is recommended, in order to obtain a smooth surface with a smooth sanding pattern.

GOLD

This durable, all-round sanding material is very well suited for high speed sanding in a multitude of applications. Gold features semi-open and special stearate coatings designed to prevent clogging and pill forming which helps achieve an optimal sanding result.

GOLD NC

Gold NC has been developed for sanding of material that must not be contaminated with corrosive agents. The preparation of corrosion sensitive surfaces requires abrasive products which contain the lowest possible amount of heavy metals. Special procedures are applied throughout the production process of Gold NC to reduce the metal content. The tough, latex-coated base paper makes Gold NC a balanced, flexible product with good initial aggressivity and good durability. Gold NC has a surface layer of calcium stearate that provides good clogging resistance when sanding aluminium and when sanding other materials with high clogging tendency. Gold NC is suitable for sanding of aluminium and painted aluminium parts within the automotive industry.

GOLD PROFLEX

Gold ProFlex is a stearate coated abrasive paper for dry hand sanding of wood, fillers, paints and lacquers. The backing consists of a flexible, impregnated latex paper that provides desired flexibility and conformity in profile sanding operations as well as on flat surfaces. The paper has a an anti-slip coating on the back side in order to provide good grip and feeling during the sanding. Gold ProFlex has aluminium oxide grain, which provides a good cut and an excellent scratch pattern.

GOLD SOFT

Gold Soft is a sanding disc, with optimal foam thickness. The semi-open grain coating gives a less dust clogging and better cutting performance. The soft backing gives an excellent paint finish. A softer disc edge eliminates damages on profile sanding. Gold Soft P500 is suitable for primer sanding applications and P800 for mattening clear coats. Gold Soft discs are launched in Mirka’s new packaging with an outstanding informative new yellow label.

GOLDFLEX SOFT

The soft and flexible Goldflex Soft has been developed for sanding profiled surfaces and irregular, difficult-to-reach details by hand. Goldflex Soft is especially useful within the automotive industry and the car repair branch. The foam base is grip friendly and applies pressure evenly, which reduces the risk of sanding through the surface. The special stearate coating prevents clogging. Suitable for both dry and wet sanding.

HIOLIT JF

Hiolit JF is targeted towards wood and metal sanding applications. The flexible cloth backing makes it optimal for profile sanding, seams, edges and other applications where a flexible abrasive with high edge wear is needed. The semi-open coating makes Hiolit JF a universal abrasive, especially well suited for soft and clogging materials.

IRIDIUM

Iridium is a premium paper abrasive for universal sanding. Perfected for speed and efficiency, it has a mix of ceramic and aluminium oxide grains on a flexible paper with precision coating that prevents clogging and reduces pilling. It practically repels dust and lifetime is increased as the grains stay sharp for longer. Dust extraction is optimised with multihole patterns for discs and strips. Iridium delivers amazing results on both soft and hard surfaces, making it the ideal paper abrasive choice for professionals in any industry.

MIRLON

Thanks to its special structure, Mirlon is a flexible, three-dimensional fibre sanding material that's easy to use on profiled surfaces and produces an excellent finish. It's ideal for matting of surfaces and creates an excellent base for the next lacquer layer.

MIRLON NC

Can be used for matting of aluminium and painted aluminium parts. It can be used wet as well as dry. Mirlon NC is a grain-coated non-woven abrasive, suitable for both hand sanding and machine sanding in processes where the sanded material must not become contaminated by corroding agents. Thanks to the three-dimensional construction and the high flexibility the Mirlon NC is easy to use on rounded surfaces and profiles.

MIRLON TOTAL

Developed using Mirka's innovative Total Coating™ Technology, Mirlon Total is more aggressive than Mirlon and produces a dense scratch pattern and rapid result. Suitable for use in wet and dry modes, it features an open and flexible structure and strengthened fibres which make it strong and long-lasting.

NOVASTAR

Novastar is a premium film abrasive that tackles demanding applications with unexpected ease. It has a mix of ceramic and aluminium oxide grains on a flexible film backing, with a precision coating that practically repels dust. The grains stay sharp as clogging is prevented. Great durability and excellent edge wear resistance. Dust extraction optimised with multihole pattern. Fully waterproof. Novastar delivers remarkable results, especially on hard surfaces. Outstanding performance makes it the ideal film abrasive choice for professionals in any industry.

POLARSTAR

Developed to efficiently tackle the latest demanding coatings applications, Polarstar quickly produces a fine, consistent surface finish and combines that with superb durability due to an excellent resistance to clogging. The polyester film backing material creates a more flexible and much smoother abrasive surface, compared to paper backing. In particular, it offers outstanding performance on hard tooling gelcoats and scratch resistant clearcoats.

Q.SILVER

With a backing consisting of a flexible and strong impregnated latex paper, Q-Silver features optimal aggressivity, resulting in fast and efficient stock removal. The high heat endurance of this fully resin bonded abrasive makes it ideal for tough tasks, such as 'down-to-metal' sanding operations.

Q.SILVER ACE

Q.Silver Ace is a ceramic premium abrasive with paper backing for tougher universal sanding. The ceramic grains give a boost, especially when sanding harder applications and a strong resin bonding gives good grip adhesion to the backing.

WPF

The recommended product for the manual wet sanding of plastics, lacquers and composite materials, Mirka WPF features a latex impregnated paper backing material and extra durable coating which helps produce a high quality finish, even on coarser surfaces.

WPF NEXT GEN.

WPF Next Gen is the ideal paper abrasive for effective hand sanding both wet and dry on multiple surfaces. It is very flexible, fully waterproof and has great grain adhesion. Produced with new coating technology, the abrasive surface does not clog up easily, so you can sand faster and the abrasive lasts longer. Especially recommended for automotive refinishing due to the consistent surface finish. The finer grits are optimal for fresh clear coats and make polishing easier.