展架&工具车

5.5m同轴软管 27mm x 5.5m

5.5m同轴软管 27mm x 5.5m

This Pneumatic Hose Assembly is ergonomic and has a weight of 1850 grams only. It has a high flexibility and is fully conductive. This hose can be directly connected to all our pneumatic CV machines.
Backing Pad 150mm M14 Grip Hard for Polisher

Backing Pad 150mm M14 Grip Hard for Polisher

Hard backing pad 6" 150 mm M14
Backing Pad 150mm M14 Grip Soft for Polisher

Backing Pad 150mm M14 Grip Soft for Polisher

Soft backing pad 6" 150 mm M14
Backing Pad 32mm PSA Soft, 5/Pack

Backing Pad 32mm PSA Soft, 5/Pack

Backing Pad 34mm Grip Medium, 10/Pack

Backing Pad 34mm Grip Medium, 10/Pack

Backing Pad 75x100mm Grip 33H Medium

Backing Pad 75x100mm Grip 33H Medium

Backing Pad 81x133mm Grip 54H Medium

Backing Pad 81x133mm Grip 54H Medium

Hose 27mm x 0,5m + Connector

Hose 27mm x 0,5m + Connector

This adapter + hose is suitable for all Mirka pneumatic sanders.
Hose 28mmx1,8m MPA0412

Hose 28mmx1,8m MPA0412

Interface 70x125mm 13H 10mm, 5/Pack

Interface 70x125mm 13H 10mm, 5/Pack

A flexible interface for hand sanding blocks. This 10 mm thick interface strip is used in combination with hook & loop sanding strips for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.
Interface 70x198mm 56H 10mm, 5/Pack

Interface 70x198mm 56H 10mm, 5/Pack

A flexible interface for hand sanding blocks. This 10 mm thick interface strip is used in combination with hook & loop sanding strips for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.
Mini-File 20x42mm Fine/Coarse

Mini-File 20x42mm Fine/Coarse

Ergonomically-designed rectification tool to remove runs and dirt nibs. Two-sided file held in place via magnet. One side is coarse-cut, and the other is fine-cut.
MIRKA 5S 小推车

MIRKA 5S 小推车

磨卡小推车工作组
Pad Saver 115x230mm 10H, 5/Pack

Pad Saver 115x230mm 10H, 5/Pack

A pad saver 115 x 230 mm for backing pads. This pad saver is designed with 10 holes. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding sheet, should be changed regularly. The pad savers prolong the life of the backing pad.
Pad Saver 70x400mm 14H, 5/Pack

Pad Saver 70x400mm 14H, 5/Pack

Pad saver for 70x400mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding strips, should be changed regularly. The pad savers prolong the life of the backing pad.
Pad Saver 77mm 6H, 5/Pack

Pad Saver 77mm 6H, 5/Pack

Pad saver for 77mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regulary. The pad savers prolong the life of the backing pad.
Polishing Foam Pad 150mm Black Dotted, 2/Pack

Polishing Foam Pad 150mm Black Dotted, 2/Pack

Black dotted foam pad 6" 150x25 mm 2-pack
Polishing Foam Pad 150x25mm Black Flat, 2/Pack

Polishing Foam Pad 150x25mm Black Flat, 2/Pack

A reticulated flat foam pad for hologram removal gives an excellent finishing on both fresh and fully cured paint works. The good balance between elasticity and density in the foam contributes to the final result. The pad are designed to be used in combination with Polarshine finishing compounds F05, VF5 and with Polarshine 3 Nano wax.
Twisted Wool Pad 180mm Grip

Twisted Wool Pad 180mm Grip

Twisted wool pad 7,5" 180 mm
中间软垫 3寸 6孔 厚5mm

中间软垫 3寸 6孔 厚5mm

The 5 mm thick multi interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours, with Mirka's net products. Using the multi interface pad will also produce a softer result. The interface pad is placed between the backing pad and the sanding disc.
中间软垫 5寸 44孔 厚10mm

中间软垫 5寸 44孔 厚10mm

The 10 mm thick multi interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.
中间软垫 6寸 67孔 厚10mm

中间软垫 6寸 67孔 厚10mm

The 10 mm thick multi hole interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.
中间软垫 6寸 67孔 厚5mm

中间软垫 6寸 67孔 厚5mm

The 5 mm thick multi hole interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours. The pad is developed to be used for light profile sanding, Paint Preparation sanding, Factory Primer (E-Coat) sanding and Top- and Clear Coat sanding. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

圆形磨机中性托盘 3寸 1/4" 6孔 (ROS托盘)

圆形磨机中性托盘 5寸 5/16" 44孔

Backing pad medium for Abranet discs. Delivered with a pad protector and user instructions.

圆形磨机中性托盘 6寸 5/16" 51孔

Backing pad medium for net discs. Delivered with a pad saver and user instructions.

圆形磨机多功能托盘 6寸 5/16" 61孔

Abranet medium density Unipad 150 mm (6") for all hole combinations. This Abranet unipad is optimized for flat surfaces and has a high edge durability. 15 larger holes allow use of conventional discs with 6 h, 6 + 1 h, 9 h and 15 h. Suitable for narrow shroud machines but not recommended to be used with 150 mm ROS machines, because the combination of Unipad + wide/Abranet shroud machines does not give the optimal dust extraction. Delivered with one 150 mm (6") pad saver. To ensure correct installation, always use the supplied spacing washers, making sure that a minimum gap exists between the sander’s shroud and the top part of the backing pad, to prevent friction between the two parts. Tighten the screw hard. The backing pad should never turn idle. From time to time, check that the screw is well tight.
手推板吸尘软管 20mm x 4m

手推板吸尘软管 20mm x 4m

Hose for hand sanding blocks.
托盘保护垫 5寸圆形 44孔

托盘保护垫 5寸圆形 44孔

Pad saver for 125mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regulary. The pad savers prolong the life of the backing pad.
托盘保护垫 6寸圆形 67孔

托盘保护垫 6寸圆形 67孔

Pad saver for 150mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.
托盘保护垫 70x198mm方形 56孔

托盘保护垫 70x198mm方形 56孔

Pad saver for 70x198mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding strips, should be changed regularly. The pad savers prolong the life of the backing pad.
托盘保护垫 81x133mm方形 54孔

托盘保护垫 81x133mm方形 54孔

Pad saver for 81x133mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.
抛光机托盘 175mm M14螺纹

抛光机托盘 175mm M14螺纹

Backing pad 7" 175 mm M14
方形气动磨机中性托盘 70x198mm 56孔

方形气动磨机中性托盘 70x198mm 56孔

电动磨机吸尘管 27mm x 4m

电动磨机吸尘管 27mm x 4m

Flexible suction hose connecting the sander and the dust extractor. Please note that this hose is conical. The benefit of having a conical dust extractor hose is that it improves the dust suction.
真空隔离垫 3寸圆形

真空隔离垫 3寸圆形

The vacuum block discs should be used if the vacuum dust extraction cannot be disconnected during wet sanding. The vacuum block disc protects your sander and dust extraction system, since it prevents moisture from entering the sander.
真空隔离垫 5寸圆形

真空隔离垫 5寸圆形

The vacuum block discs should be used if the vacuum dust extraction cannot be disconnected during wet sanding. The vacuum block disc protects your sander and dust extraction system, since it prevents moisture from entering the sander.
真空隔离垫 6寸圆形

真空隔离垫 6寸圆形

The vacuum block discs should be used if the vacuum dust extraction cannot be disconnected during wet sanding. The vacuum block disc protects your sander and dust extraction system, since it prevents moisture from entering the sander.
羔羊毛抛光轮 3寸

羔羊毛抛光轮 3寸

Lambs' wool pad 3" 77 mm 5-pack
羔羊毛抛光轮 6寸

羔羊毛抛光轮 6寸

Lambs' wool pad 6" 150 mm 2-pack
羔羊毛抛光轮 7寸

羔羊毛抛光轮 7寸

Lambs' wool pad 7,5" 180 mm 2-pack
超细纤维布 330x330mm 黄色

超细纤维布 330x330mm 黄色

A yellow soft micro fiber cloth, with a fine structure. Absorbs residue well and is washable. Packed 2 pcs/bag.
鲨鱼刀 48x28mm

鲨鱼刀 48x28mm

A professional precision tool for removal of minor lacquer defects like dust enclosures and runs.
黑色碳粉打磨指示剂  100g

黑色碳粉打磨指示剂 100g

The Dry Guide Coat has excellent covering properties. The powder makes all imperfections and scratches visible. This unique applicator leaves an even powder coating. The applicator has flexible edges which makes it easy to use on contoured areas. This is a great tool in guiding the operator through the sanding process and achieving a perfect result. The black powder is used for light colour surfaces.