バッキングパッド

Backing Pad 125mm 5/16" Grip 5H Medium

 Backing pad medium for grip discs.

Backing Pad 125mm 5/16" Grip Medium

Backing Pad Net 150mm 5/16" Grip 52H Soft

 Soft Backing pad for Abranet discs.

アブラネット　ユニパッド 6" 5/16"+ M8 MED.

 Abranet medium density Unipad 150 mm (6") for all hole combinations. This Abranet unipad is optimized for flat surfaces and has a high edge durability. 15 larger holes allow use of conventional discs with 6 h, 6 + 1 h, 9 h and 15 h. Suitable for narrow shroud machines but not recommended to be used with 150 mm ROS machines, because the combination of Unipad + wide/Abranet shroud machines does not give the optimal dust extraction. Delivered with one 150 mm (6") pad saver. To ensure correct installation, always use the supplied spacing washers, making sure that a minimum gap exists between the sander’s shroud and the top part of the backing pad, to prevent friction between the two parts. Tighten the screw hard. The backing pad should never turn idle. From time to time, check that the screw is well tight.

ネットバッキングパッド 5" 5/16" MED.

 Backing pad medium for Abranet discs. Delivered with a pad protector and user instructions.

ネットバッキングパッド 5" 5/16" SOFT

 Soft Backing pad for Abranet discs.

ネットバッキングパッド 6" 5/16" MED. 51 H

 Backing pad medium for net discs. Delivered with a pad saver and user instructions.

バッキングパッド 3" 77mm グリップ 6H 1/4" MED.

 バッキングパッド 32mm PSA ソフト 5/BOX

バッキングパッド 32mm PSA ソフト 5/BOX

バッキングパッド 6" PSA 5/16" MED.

 Backing pad medium no hole for PSA discs.

バッキングパッド 6" PSA 6H 5/16" MED.

 Backing pad medium for PSA discs.

バッキングパッド 6" グリップ HUTCH. 5/16" MED

 Backing pad medium for grip discs. バッキングパッド 81x133mm 54H GRIP

バッキングパッド 81x133mm 54H GRIP