Suportes para Politrizes

Backing Pad 125mm 5/16" Grip 5H Medium

Backing pad medium for grip discs.

Backing Pad 150mm 5/16" Grip 15H Medium

Backing pad medium for grip discs. This backing pad fits Mirka’s 6 H, 6 + 1 H, 8 + 1 H and 15 H discs.
Backing Pad 225mm 25H for Mirka LEROS + 8 Screws

Backing Pad 225mm 25H for Mirka LEROS + 8 Screws

Backing Pad 225mm 25H Grip for Mirka LEROS

Backing Pad 225mm 25H Grip for Mirka LEROS

Backing Pad 70x198mm Grip 56H Medium

Backing Pad 70x198mm Grip 56H Medium

Backing Pad 75x100mm Grip 33H Medium

Backing Pad 75x100mm Grip 33H Medium

Backing Pad 77mm 1/4" Grip 6H Medium

Backing Pad 77mm 1/4" Grip Medium

Backing Pad Net 100x152x152mm Grip 32H Medium

Backing Pad Net 100x152x152mm Grip 32H Medium

Backing pad suitable for the Mirka® DEOS Delta sander.

Backing Pad Net 125mm 5/16" Grip 28H 130g Medium

Backing Pad Net 125mm 5/16" Grip 28H Medium

Backing Pad Net 125mm 5/16" Grip 44H Medium

Backing pad medium for Abranet discs. Delivered with a pad protector and user instructions.

Backing Pad Net 150mm 5/16" Grip 48H Medium

Backing Pad Net 70x198mm Grip 48H Medium

Backing Pad Net 70x198mm Grip 48H Medium

Backing Pad Quick Lock 32mm Grip Soft, 10/Pack

Backing Pad Quick Lock 32mm Grip Soft, 10/Pack

Backing Pad Quick Lock 32mm PSA Hard, 10/Pack

Backing Pad Quick Lock 32mm PSA Hard, 10/Pack

Backing Pad UNI 150mm 5/16"+ M8 Grip 61H Hard

Abranet hard density Unipad 150 mm (6") for all hole combinations. This Abranet unipad is optimized for flat surfaces and has a high edge durability. 15 larger holes allow use of conventional discs with 6 h, 6 + 1 h, 9 h and 15 h. Suitable for narrow shroud machines but not recommended to be used with 150 mm ROS machines, because the combination of Unipad + wide/Abranet shroud machines does not give the optimal dust extraction. Delivered with one 150 mm (6") pad saver. To ensure correct installation, always use the supplied spacing washers, making sure that a minimum gap exists between the sander’s shroud and the top part of the backing pad, to prevent friction between the two parts. Tighten the screw hard. The backing pad should never turn idle. From time to time, check that the screw is well tight.
Sanding Plate Base 225mm Grip 16H

Sanding Plate Base 225mm Grip 16H