磨机托盘

The Mirka backing pads for sanding machines are designed to meet the challenges set when performing demanding sanding operations. Mirka has developed backing pads for both sanding with traditional abrasives and for sanding dust-free with Mirka's Net Sanding dust extraction system. In order to achieve the best performance and a good sanding result, it is important to combine the right sander with the right accessories. Browse our backing pads and find the backing pads suitable for your sanders.

点磨机软托盘

点磨机软托盘

方形电动磨机中性托盘 70x198mm 48孔

方形电动磨机中性托盘 70x198mm 48孔

方形气动磨机中性托盘 70x198mm 56孔

方形气动磨机中性托盘 70x198mm 56孔

方形气动磨机中性托盘 81x133mm 54孔

方形气动磨机中性托盘 81x133mm 54孔

圆形磨机多功能托盘 6寸 5/16" 61孔

Abranet medium density Unipad 150 mm (6") for all hole combinations. This Abranet unipad is optimized for flat surfaces and has a high edge durability. 15 larger holes allow use of conventional discs with 6 h, 6 + 1 h, 9 h and 15 h. Suitable for narrow shroud machines but not recommended to be used with 150 mm ROS machines, because the combination of Unipad + wide/Abranet shroud machines does not give the optimal dust extraction. Delivered with one 150 mm (6") pad saver. To ensure correct installation, always use the supplied spacing washers, making sure that a minimum gap exists between the sander’s shroud and the top part of the backing pad, to prevent friction between the two parts. Tighten the screw hard. The backing pad should never turn idle. From time to time, check that the screw is well tight.

圆形磨机中性托盘 3寸 1/4" (ROP2托盘)

圆形磨机中性托盘 3寸 1/4" 6孔 (ROS托盘)

圆形磨机中性托盘 5寸 5/16" 44孔

Backing pad medium for Abranet discs. Delivered with a pad protector and user instructions.

圆形磨机中性托盘 6寸 5/16" 48孔 (PROS托盘)

圆形磨机中性托盘 6寸 5/16" 51孔

Backing pad medium for net discs. Delivered with a pad saver and user instructions.