Adapter for Dust Extractor 30-48mm

Adapter for connecting the dust extractor hose to the dust extractor. Can be cut to fit dust extractors of other brands. Electrical conductive (≤ 10⁶ Ω/square).

Backing Pad Net 125mm 5/16" Grip 28H 130g Medium

Fits all Mirka® 150 mm (6”) sanders. This 130g backing pad gives you the ability to switch sizes and use 125 mm (5”) sanding discs.

Backing Pad Net 150mm 5/16" Grip 48H Medium

A 150 mm (6”) backing pad with a central air inlet. The air channels leading to the center of the backing pad has an increased air flow and therefore the dust is removed efficiently.

Backing Pad Net 70x198mm Grip 48H Medium

Grip backing pad for electric orbital sanders.

Backing Pad Net 81x133mm Grip 46H Medium

Grip backing pad for electric orbital sander.

Case Inlay for 150mm discs

Case Inlay for 150mm discs. Suitable for Mirka Case 400x300x210mm (MIN6533011) L:38,1cm, W:26,5cm, D:8cm.

Clean-Up Kit for Dust Extractors

A clean-up kit with a brush nozzle for dust extractors. The brush nozzle makes the kit more versatile. The hose is 4 m (Ø 32mm) and the length for the stainless steel tubes is 500 mm x 2.

Fastening Straps Kit 6/Pack

This hook and loop fastening strap kit enables attachment of the electrical cord to the vacuum hose.

Hepa Filter Cover for DE 1230, 1242

The HEPA Filter Cover for DE 1230/1242 is necessary to keep the HEPA filter (Mirkacode 8999100711) in place.

Hepa Filter for DE 1230, 1242

The HEPA (High Efficiency Particulate Air) filter can be installed in addition to the standard filter to improve the filtration. By adding this filter you will get a triple filtration: 1. Fleece dust bag 2. Standard main filter 3. HEPA filter. Please note that adding this filter will not make a dust extractor DE 1230/42 an H-class extractor, even though the filter itself fulfills HEPA class H13 requirements. When installing a HEPA-filter for the first time, the HEPA Filter Cover for DE 1230/1242 (Mirkacode 8999100811) is necessary.

Hose 20mm x 4m for Hand Sanding Blocks

Hose for hand sanding blocks. Electrical conductive (≤ 10⁶ Ω/square).

Hose 27mm x 4m + Connector

A flexible dust suction hose connecting the sander and the dust extractor. Please note that this hose is conical. The conical dust suction hose is designed to improve dust suction. Electrical conductive (≤ 10⁶ Ω/square).

Hose Adapter 32/54mm

Hose adapter Ø 32/54 mm for Mirka dust extractors. The adapter connects the hose into the dust extractor. Electrical conductive (≤ 10⁶ Ω/square). Delivered together with the following hoses: MIE6514511 / MIE6514511US, MIE6514711 / MIE6514711US,MIN6519411, MIN6519711, 8992514511, 8992514711 and 8992515011.

Interface 81x133mm 54H 7mm, 5/Pack

A flexible 7 mm thick interface pad, suitable for hand sanding or for orbital sanders. The interface pad is used in combination with grip sanding sheets for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding sheet.

Mirka Case 400x300x158mm Yellow

Splash and dust resistant case: a sturdy storage solution that is easy to pack and move to the next work site. The case protects the tool and prolongs its lifetime. The connectable case system keeps tools and equipment organized and in one place. Hight 158mm.

Pad Saver 150mm 67H, 5/Pack

Pad saver for 150mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 70x198mm 56H, 5/Pack

Pad saver for 70x198mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding strips, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 81x133mm 54H, 5/Pack

Pad saver for 81x133mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Wrench 24mm for 125/150mm Machines

Suitable for 125 / 150 mm electric and pneumatic sanders as well two-handed pneumatic sanders and polishers.

Soft Connector 27mm

Soft Connector, connects the sander to the dust extractor hose Ø 27 mm. Electrical conductive (≤ 10⁶ Ω/square). Suitable for all Mirka® DEOS, Mirka® DEROS, Mirka® LEROS and Mirka® PROS machines. Also suitable for the Mirka® Decosander and the Dust Suction Hood, as well as sanders of most other brands. Not suitable for Mirka® OS, Mirka® ROS nor Mirka® CEROS.