Backing Pad 225mm 25H for Mirka LEROS + 8 Screws

Backing pad 225mm designed for Mirka® LEROS 950CV. This plain, hard backing pad has to be used together with an interface (MIW9534611). The interface is attached to the backing pad with screws (included). Optimised to be used together with Abranet net sanding abrasive for a smooth surface finish.

Backing Pad 225mm 25H Grip for Mirka LEROS

225 mm backing pad designed forMirka® LEROS 950CV. This hard backing pad is recommended to be used together with an interface (MIW9534611). Optimised to be used together with Abranet net sanding abrasive for a smooth surface finish.

Backing Pad Net 125mm 5/16" Grip 28H 130g Medium

Fits all Mirka 150 mm (6”) sanders. This 130g backing pad gives you the ability to switch sizes and use 125 mm (5”) sanding discs.

Backing Pad Net 150mm 5/16" Grip 48H Medium

A 150 mm (6”) backing pad with a central air inlet. The air channels leading to the center of the backing pad has an increased air flow and therefore the dust is removed efficiently.

Backing Pad Net 70x198mm Grip 48H Medium

Grip backing pad for electric orbital sanders.

Backing plate for DEOS 70x198mm

Backing Plate Screw Kit

Balancing Housing Screw Kit

Balancing Screw Kit for DEROS/PROS

A tool kit for reducing vibrations when sanding with pad saver or interface. Disconnect air supply/power cable. Remove the backing pad and add hex nuts and screws. Tighten to 2 Nm.

Balancing Weight for DEOS 70x198mm

Bearing Dual Seal Kit 125/150mm

Bearing Housing for DEOS

Bearing Kit for DEOS

Brake Seal

Brake Seal MPP0321 125/150mm for DEROS/PROS

Cap for Pot-Meter for DE 1230

Contact Spring with Wire for DE 1230

Container Clamp for DE 1230/1242

Container Sealing for DE 1230

Cord Strap for DE 1230

Cover Cap Kit

Cover for Motor Cooling Filter for DE 1230/1242

Cover Plate for DEROS/DEOS

Dust Hose Kit

Electronic Board 230-240V for DE 1025 L

Electronic Board 230-240V for DE 1230 L PC

Electronic Board 230-240V for DE 1230/1242 L AFC

Fan 5,0mm/130g Pad for DEROS 150mm

Fan 8,0mm/130g Pad for DEROS 150mm

Fan for DEOS

Filter for DE 1230/1242

Filter for dust extractors in the 1230 range.

Filter for DE 415/915/1025 L

Dust Extractor filter for Mirka DE 415/915/1025 L.

Filter Support Cage for 915/1025 L

Flap-lever kit for DE 1230 PC

Floater with Magnet for DE 1230

Foam Sealing 298x148 for DE 1230

Ground Wire

Handle kit for DE 1230/1242

Handle Screw Kit

Hatch door Clamp Kit for DE 1230/1242

Hatch Door Frame Kit for DE 1230 PC

Hatch Door Frame Kit for DE AFC

Hatch Door Hinge Snap for DE 1230/1242, 2/Pack

Hatch Door Upper Cover for DE 1230 PC

Hatch Door Upper Cover for DE 1230/1242 AFC

Hepa Filter Cover for DE 1230/1242

The HEPA Filter Cover for DE 1230/1242 is necessary to keep the HEPA filter (Mirkacode 8999100711) in place.

Hepa Filter for DE 1230/1242

The HEPA (High Efficiency Particulate Air) filter can be installed in addition to the standard filter to fulfil H-class requirements. When installing a HEPA-filter for the first time, the HEPA Filter Cover for DE 1230/1242 (Mirkacode 8999100811) is necessary.

Hole Screw Kit for LEROS, 8/Pack

Hose Connector for LEROS

Hose hook for DE 1230/1242

Housing for DEOS 353/383

Housing for DEROS 550,625,650,680

Interface 225mm 25H for Mirka LEROS, 1/Pack

3 mm thick soft interface for Mirka® LEROS backing pad (MIW9564311). The interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Joint Fork Kit

Joint Screw Kit

Label kit AFC Control Panel & Dust Class, 5/Pack

Lever 3,0mm for DEOS

Lever 5,0mm for DEROS

Lever 8,0mm for DEROS

Mains Cable 4,3m CE 230V ANZ

Mains cable 4,3m that is plugged directly to a Mirka DEROS, DEOS or LEROS electric sander ANZ-plug versions.

Mirka LEROS screw pad conversion kit

Motor 5,0mm/130g Pad for DEROS 150mm 230V

Motor 8,0mm/130g Pad for DEROS 150mm 230V

Motor Assembly 230V for DE 1025 L

Motor Assembly 230V for DEOS

Motor Assembly for DE 1230/1242 230V

Motor Cooling Filter for DE 1230/1242

Motor cooling filter suitable for 1230 model dust extractors.

O-Ring Set for LEROS

Pad Screw Kit for DEOS

Pad Support for OS 343/DEOS

Pad Wrench 24mm for 125/150mm Machines

Suitable for 125 / 150 mm electric and pneumatic sanders as well two-handed pneumatic sanders and polishers.

PC Button for DE 1230 PC

PCB Screw Kit

PCB Spacer Kit

Power and Signal Cable

Power Socket Assembly Kit

Pushlock Washer for DEOS

Reed Sensor with Applicator for DE 1230

Rewireable Connector HP-9R

Rotary Knob Kit for Mirka DE

Rotary Switch 16A for DE 1230 PC

Rotary Switch 16A for DE 1230/1242 AFC

Rubber Strap for DE 1025 L

Screw 5x35mm for DE 1230/1242

Screw Kit Fairing

Screw Kit for DEROS/DEOS

Screw Kit Motor

Screw Kit Y-Branch

Seal for DEOS 353/383

Socket 10A/250V for Mirka DE, AU/NZ

Solenoid Kit 220-240V for DE AFC

Speed Controller for DEROS/DEOS 230V

Spindle + Bearing Assembly for LEROS

Spindle Bearing Dual Seal Kit 125/150mm

Spindle Bearing Kit MPP9001 for DEROS/PROS

Spindle MPP0320 for DEROS/PROS

Spindle+Bearing Assembly for DEROS/PROS

Spring for Button for DE 1230 PC

Start Button Kit for DEROS/DEOS

Swivel Exhaust Kit for DEOS 353/383

Swivel Exhaust Kit for DEROS 125/150mm

Mirka DEROS electric sander accessory.

Top Cover for DE 1230/1242

Torsion Spring 09x18x45 for DE 915/1025L

Tube for LEROS

Turning Knob Kit for DE 1230/1242

Type Label Kit for DEOS 353,383 220-240V

Type Label Kit for LEROS 220-240V