ABRANET NC

ABRANET NC

 Abranet® NC has been developed for sanding of material that must not be contaminated with corrosive agents. The preparation of corrosion sensitive surfaces requires abrasive products which contain the lowest possible amount of heavy metals. Special procedures are applied throughout the production process of Abranet NC to reduce the metal content and ensure consistent quality. Due to the construction, Abranet NC has significantly lower heavy metal content than the corresponding traditional products. Abranet NC is suitable for sanding of aluminium and painted aluminium parts within the automotive industry. ABRALON

ABRALON

 Abralonは、平滑面と輪郭面の研磨作業のために開発されたユニークな多機能研磨材です。ミルカ社が特許を有する柔軟構造によって、傾斜面や端部でもスムーズなサンディングパターンが得られ、圧力痕が残る危険も最小限に抑えています。柔軟性のある織りになっているため、水分や空気が自由に透過し、機械と手作業による空研ぎと水研ぎに適しています。 ABRALON J3

ABRALON J3

 Abralon® J3 is a unique multifunctional Abralon abrasive for an ultrafine surface finish for both smooth and profiled surfaces. Abralon J3 has a higher density foam layer which is only 3 mm thick. Recommended for high gloss applications, leaving a very smooth surface prior to polish. Abralon J3 is suitable for all kinds of material, both smooth and profiled surfaces. The flexible weave allows water and air to pass freely, and makes it suitable for both dry and wet sanding. ALOX

ALOX

 Aloxは、耐久性と柔軟性をともに備え、手研磨に最適です。切削力に優れており、質の高い表面仕上げが得られる汎用の研磨材です。 GOLD NC

GOLD NC

 Gold NC has been developed for sanding of material that must not be contaminated with corrosive agents. The preparation of corrosion sensitive surfaces requires abrasive products which contain the lowest possible amount of heavy metals. Special procedures are applied throughout the production process of Gold NC to reduce the metal content. The tough, latex-coated base paper makes Gold NC a balanced, flexible product with good initial aggressivity and good durability. Gold NC has a surface layer of calcium stearate that provides good clogging resistance when sanding aluminium and when sanding other materials with high clogging tendency. Gold NC is suitable for sanding of aluminium and painted aluminium parts within the automotive industry. JEPUFLEX ANTISTATIC

JEPUFLEX ANTISTATIC

 A high class abrasive with a wide application area. The focus of the optimization work has been the sanding of hard wood such as beech, birch and oak. The strong antistatic paper provides dimensionally accurate and reliable wide belts. Full resin bonding and aluminium oxide grain guarantee a very durable product. Silicon carbide grain used in the coarsest grit gives extra strength to the product. These qualities together with a well adjusted coating density make Jepuflex Antistatic a genuine all-round product that works well also on metal, plastic and lacquer. MIRLON NC

MIRLON NC

 Can be used for matting of aluminium and painted aluminium parts. It can be used wet as well as dry. Mirlon® NC is a grain-coated non-woven abrasive, suitable for both hand sanding and machine sanding in processes where the sanded material must not become contaminated by corroding agents. Thanks to the three-dimensional construction and the high flexibility the Mirlon NC is easy to use on rounded surfaces and profiles. OSP

OSP

 As the name suggests, the Optimized Surface Preparation targets the entire process and this is a decisive factor. As well as maximizing the performance of every individual phase of the process, each step has also been optimized to work perfectly with all the other steps. Mirka’s OSP abrasives are clearly marked with numbers, making it easy to know which disc or strip should be used for each step. Number 1 is used for paint removal, number 2 for feather edge, number 3 for preparing the repaired area for primer by reducing scratches and expanding the feather edge and number 4 for finalising the sanding.