BASECUT

BASECUT

Basecut is the economical, high efficiency choice for sanding with paper. There are several productivity and efficiency features, including a high initial, aggressive cut and a long working lifespan which makes it the cost effective choice.
CARATFLEX

CARATFLEX

A stearate coated abrasive for dry sanding applications, Carat Flex features fine stock removal, a uniformed scratch pattern, a long lifespan and extremely good grain adherence. The backing consists of a flexible, impregnated latex paper which is ideal for profile sanding.
GOLD PROFLEX

GOLD PROFLEX

Gold Proflex is a stearate coated abrasive paper for dry hand sanding of wood, fillers, paints and lacquers. The backing consists of a flexible, impregnated latex paper that provides desired flexibility and conformity in profile sanding operations as well as on flat surfaces. The paper has an anti-slip coating on the back side in order to provide good grip and feeling during the sanding. Gold Proflex has aluminium oxide grain, which provides a good cut and an excellent scratch pattern.
GOLDFLEX SOFT

GOLDFLEX SOFT

The soft and flexible Goldflex Soft has been developed for sanding profiled surfaces and irregular, difficult-to-reach details by hand. Goldflex Soft is especially useful within the automotive industry and the car repair branch. The foam base is grip friendly and applies pressure evenly, which reduces the risk of sanding through the surface. The special stearate coating prevents clogging. Suitable for both dry and wet sanding.
MIRLON

MIRLON

Mirlon is a flexible, three-dimensional fibre sanding material that is easy to use on profiled surfaces and gives an excellent finish, thanks to its special structure. It’s ideal for matting of surfaces and creates an excellent base for the next lacquer layer.
MIRLON TOTAL

MIRLON TOTAL

Developed using Mirka's innovative Total Coating™ Technology, Mirlon Total is more aggressive than Mirlon and produces a dense scratch pattern and rapid result. Suitable for use in wet and dry modes, it features an open and flexible structure and strengthened fibers which make it strong and long-lasting.
NOVASTAR FLEX

NOVASTAR FLEX

You can easily tackle all kinds of shapes and complex contours with this ultra-flexible hand sanding sheet for dry sanding. The abrasive surface does not wrinkle or break, and there are no sharp edges even when folded. With the Novastar Flex hand sanding sheets you get the perfect balance in cutting and scratch pattern. Features colour coded grits and the grip backing, as well as centre perforation for tearing in half. Both full and half sheets can be used with or without a hand pad. The sheets are easy to clean from dust, thus last long and gives a superior finish, helping you save both time and money.
OSP

OSP

As the name suggests, the Optimized Surface Preparation targets the entire process and this is a decisive factor. As well as maximizing the performance of every individual phase of the process, each step has also been optimized to work perfectly with all the other steps. Mirka’s OSP abrasives are clearly marked with numbers telling which disc or strip should be used for each step. Number 1 is used for paint removal, number 2 for feather edge, number 3 for preparing the repaired area for primer by reducing scratches and expanding the feather edge and number 4 for finalising the sanding.
WPF

WPF

The recommended product for the manual wet sanding of plastics, lacquers and composite materials, Mirka WPF features a latex impregnated paper backing material and extra durable coating which helps produce a high quality finish, even on coarser surfaces.
WPF

WPF

WPF is the recommended product for manual wet sanding of plastics, lacquers and composite materials. The product features a latex-impregnated paper backing material and extra durable coating which helps produce a high quality finish, even on coarser surfaces. The range also includes small corrective sanding discs and roses used for spot repair. P3000 is available as corrective sanding discs only.