Belt Sanding
Sanding With Wide and Narrow Belts
When sanding with a belt, many things must be considered to get the best result and the highest possible efficiency. The choice of sanding material, for example, is critical, but other factors such as adjustment of sanding unit, sanding speed selection, and handling are also essential. When you choose a belt from Mirka, you can be confident that you will get the most efficient sanding results without compromising the quality.
Choose the right belt for your surface
Mirka Belt Range
Choosing the appropriate sanding belt can be a challenge, you want to make sure to have the optimal abrasive for your sanding application and surface, otherwise you can damage both the surface and your belt sander.
Here you can learn more about what kind of we belt we recommend for your surface for the job.
Learn more about what belt we recommend for different surfaces and applications
Choose the right belt to make more
Increase Profit
Overall sanding costs can be minimised simply by choosing the most suitable
product for each sanding operation. That means:
- Choosing the right type of grit and coating
- Using the optimal grit sequence
- Avoiding sanding with finer grits than necessar
Optimising belt lifespan with the right application
Sand Longer
The lifespan of the belt can be further increased by ensuring that the sanding
equipment is correct and used properly:
- Choose the right type of sanding unit for each sanding operation
- Adjust the sanding machine correctly
- Ensure the machine is properly maintained
- Check that the dust extraction is adequate
Recommended grit size use
Grit Size and Sequence
In general, the first sanding belt is used for stock removal, while the following
belts are only used for creating an even surface finish.
| Grit size | Use |
| P24-P80 | Coarse sanding, calibration |
| P100-P220 | Sanding before coating |
| P220-P500 | Intermediate sanding |
| P600-P1200 | Pre-polishing sanding |