Interfaces

Mirka is offering interface pads for both net and traditional abrasives. By using an interface pad you will get a softer sanding result. The interface pad is placed between the backing pad and the abrasive.

Interface Pad 2.75"x5"x.375" 13H, 5/Pkg

 The 7 mm thick interface strip is used in combination with hook & loop sanding strips for sanding rounded surfaces and contours. Using the interface strip will also produce a softer result. The Interface strip is placed between the backing pad and the sanding strip.

Interface Pad 2.75"x7.75"x.375" 56H, 1/Pkg

Interface Pad 2.75"x7.75"x.375" 56H, 5/Pkg

 The 10 mm thick interface strip is used in combination with hook & loop sanding strips for sanding rounded surfaces and contours. Using the interface strip will also produce a softer result. The Interface strip is placed between the backing pad and the sanding strip.

Interface Pad 2.75x 5" Grip MH, 1/Pkg

Interface Pad 2.875" Grip, 5/Pkg

Interface Pad 3" Grip, 5/Pkg

 Interface Pad 3

Interface Pad 3"x.2" Grip 6H, 5/Pkg

 The 5 mm thick multi interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours, with Mirka's net products. Using the multi interface pad will also produce a softer result. The multi Interface pad is placed between the backing pad and the sanding disc.

Interface Pad 3"x4"x.28" Grip 33H, 5/Pkg

 A flexible 7 mm thick interface pad, suitable for hand sanding or for orbital sanders. The interface pad is used in combination with grip sanding sheets for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding sheet.

Interface Pad 3"x5"x.28" 54H, 5/Pkg

 A flexible 7 mm thick interface pad, suitable for hand sanding or for orbital sanders. The interface pad is used in combination with grip sanding sheets for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding sheet. Interface Pad 4.875

Interface Pad 4.875"x1" Grip 5H, 5/Pkg

 Interface Pad 4.875

Interface Pad 4.875"x1" Grip Multihole, 5/Pkg

 Interface Pad 5

Interface Pad 5" x .275" Grip 5H, 5/Pkg

 The 7 mm thick interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc. Interface Pad 5

Interface Pad 5"x.2" Grip 44H, 5/Pkg

 The 5 mm thick multi hole interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. The pad is developed to be used for light profile sanding, Paint Preparation sanding, Factory Primer (E-Coat) sanding and Top- and Clear Coat sanding. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc. Interface Pad 5

Interface Pad 5"x.39" Grip 33H, 5/Pkg

 The 10 mm thick multi hole interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc. Interface Pad 5

Interface Pad 5"x.39" Grip 44H, 1/Pkg

 Interface Pad 5

Interface Pad 5"x.39" Grip 44H, 5/Pkg

 The 10 mm thick multi interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours, with Mirka's net products. Using the multi interface pad will also produce a softer result. The multi Interface pad is placed between the backing pad and the sanding disc.

Interface Pad 6" Grip 6H, 5/Pkg

Interface Pad 6" Grip MH, 1/Pkg

Interface Pad 6" Grip, 5/Pkg

 Interface Pad 6

Interface Pad 6" x .275" Grip 15H, 5/Pkg

 The 7 mm thick interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc. Interface Pad 6

Interface Pad 6"x.2" Grip 67H, 5/Pkg

 The 5 mm thick multi hole interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. The pad is developed to be used for light profile sanding, Paint Preparation sanding, Factory Primer (E-Coat) sanding and Top- and Clear Coat sanding. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc. Interface Pad 6

Interface Pad 6"x.39" Grip 67H, 5/Pkg

 The 10 mm thick multi interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours, with Mirka's net products. Using the multi interface pad will also produce a softer result. The multi Interface pad is placed between the backing pad and the sanding disc. Interface Pad 8

Interface Pad 8"x.28" 89H, 1/Pkg

 This interface is suitable for use with 8" 200 mm 89 holes Net backing pad, 8295885111. The backing pad has been developed to be used with the 200 mm two-handed sander Mirka® ROS2 850CV. The 7 mm thick interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface Pad 9" 25H for Mirka LEROS, 1/Pkg

 NET INTERFACE 9

NET INTERFACE 9"x.16", 10 Discs/Pkg

 This type of interface allows to use non-woven products on power tools. It provides great dust extraction and the mushroom shaped hooks makes the non-woven product stick well to the interface and prevents the fibers from getting stuck in the backing pad. The interface removes the need to use velour on a non-vowen product and thereby enables usage of both Mirlon and Mirlon Total, as discs or sheets when doing tool-sanding. The unique construction is based on a patented spacer backing. NET INTERFACE MIRLON 6

NET INTERFACE MIRLON 6"x.16", 2 Discs/Pkg

 This unique interface provides great dust extraction when sanding with Mirka non-vowen products. The interface removes the need to use velour on a non-vowen product and thereby enables usage of both Mirlon and Mirlon Total, as discs or sheets when doing tool-sanding.The unique construction is based on a patented spacer backing.