Net Sanding Range

Mirka’s innovative net sanding concept Abranet is unlike any other. The patented construction consists of a dense network of polyamide fabric threads onto which the net abrasive grit is bonded. This open weave, net structure means that no dust particle is more than 0.5 mm from a dust extraction hole. The result is phenomenal dust extraction across the entire abrasive surface and virtually dust-free sanding.

Mirka’s net abrasives are so efficient at removing potentially dangerous sanding dust they minimise dust contamination in the workplace and create a far healthier environment. Moreover, the products eliminate the frustrating problem of dust clogging the abrasive and creating pills which cause defects in the sanding surface. Therefore, Mirka’s unique net abrasives retain their original aggressive sanding performance for far longer resulting in fewer abrasives being needed for a given job. Since dust is continuously being sucked away it’s always possible to see exactly what is happening at the sanding surface. This gives the user greater control over the job and avoids problems such as over sanding.

Mirka was the first abrasives company in the world to develop a dust-free sanding system.

ABRALON

ABRALON

Abralon is a unique, multifunctional sanding material developed for tackling both smooth and profiled surfaces. Its patented, flexible construction allows it to create a smooth sanding pattern on angled surfaces and edges while minimizing the risk of pressure marks. The flexible weave also allows water and air to pass freely, making it suitable for both dry and wet sanding, by machine or by hand.
ABRALON J3

ABRALON J3

Abralon J3 is a unique multifunctional Abralon abrasive for an ultrafine surface finish for both smooth and profiled surfaces. J3 has a higher density foam layer which is only 3 mm thick. Recommended for high gloss applications, leaving a very smooth surface prior to polish. Abralon J3 is suitable for all kinds of material, both smooth and profiled surfaces. Its flexible weave allows water and air to pass freely, suitable for both dry and wet sanding.
ABRALON J5

ABRALON J5

Abralon J5 is a unique, multifunctional Abralon abrasive for an ultrafine surface finish. J5 has a higher density foam layer which is 5 mm thick. Removes minor defects and flattens the surface for a superior finish. Suitable for all kinds for material, both smooth and profiled surfaces. The flexible weave allows water and air to pass freely, suitable for both dry and wet sanding.
ABRANET

ABRANET

The multifunctional and classic Abranet is especially developed for sanding putty, primers, lacquers, composite materials and a wide range of other materials for industrial use. Abranet combines high performance and a longer lifespan than traditional abrasives, making it a cost-effective solution. Designed for dry sanding by machine or by hand, its true dust-free sanding characteristics result in a cleaner work environment, as well as a better surface finish.
ABRANET ACE

ABRANET ACE

Abranet Ace is developed to achieve outstanding results on challenging surface conditioning and repair applications. Because of its optimzed net construction and ceramic grains, Abranet Ace offers superior cut and performance for hardwoods (such as beech and oak) and fast cutting on various solid surface materials as well as for cleaning of different industrial rollers. Abranet Ace also works excellent on primer sanding applications.
ABRANET ACE HD

ABRANET ACE HD

Abranet Ace HD is durable and tough with ceramic grains. The strong net structure resists high wear and tear and the product is ideal for heavy-duty applications. The improved woven mesh backing increases the lifetime of the abrasive, and makes the sanding process faster. Abranet Ace HD for dust-free sanding has coarse grits P40, P60 and P80.
ABRANET HD

ABRANET HD

Abranet HD achieves outstanding results on the most challenging surface conditioning and repair applications such as paint stripping and coarse putty sanding. Abranet HD has a nylon mesh backing material (in contrast to paper) to create a more flexible and durable abrasive product which produces a more consistent surface finish more quickly. Designed for optimum performance in wet and dry modes, it features exceptional resistance to edge wear and clogging which means it retains its high efficiency sanding properties for far longer, especially in demanding situations. It’s also manufactured using an environmentally friendly, solvent-free coating.
ABRANET MAX

ABRANET MAX

Abranet Max is a universal net abrasive suited for a broad variety of sanding applications and is especially developed for the wood industry. Due to the net structure it resists clogging on resinous wood types or soft materials and the sanded surface stays cooler and avoids burning. The tough aluminium oxide grain gives a high cut rate on harder wood types and materials. The symmetric net structure enables an efficient cut and stock removal. Lower pressure is needed and a more consistent surface finish means minimal quality variations in the process when sanding with Abranet Max. The product offers an extreme long lifetime compared to conventional abrasive belts, which results in fewer belts being needed to complete the job and also cost savings and time efficiency because of less downtime in production due to changing of belts. The product is also well suited for applications where water is used as cooling agent.
ABRANET NC

ABRANET NC

Abranet NC has been developed for sanding of material that must not be contaminated with corrosive agents. The preparation of corrosion sensitive surfaces requires abrasive products which contain the lowest possible amount of heavy metals. Special procedures are applied throughout the production process of Abranet NC to reduce the metal content and ensure consistent quality. Due to the construction, Abranet NC has significantly lower heavy metal content than the corresponding traditional products. Abranet NC is suitable for sanding of aluminium and painted aluminium parts within the automotive.
ABRANET NS

ABRANET NS

Abranet NS, a multifunctional net abrasive without stearate. A combination of high performance and a longer lifespan than traditional abrasives gives a cost-effective solution. Abranet NS is excellent for cleaning of different industrial rollers.
ABRANET SOFT

ABRANET SOFT

Abranet Soft is a combination of a multifunctional net abrasive and a thin foam layer. The foam layer and open structure provide flexibility that allows the material to easily follow surface contours and minimises clogging. Since dust collects in the foam layer during sanding, the result is a smooth surface finish. Abranet Soft is suitable for pre-polishing lacquered surfaces, while coarser grits can be used for intermediate sanding of lacquered wooden surfaces by hand. Recommended for wet sanding.
ALOX

ALOX

Combining durability with flexibility, Alox is well suited to sanding by hand. With its excellent cutting qualities, this is an all-round sanding material that produces a high quality surface finish.
AUTONET

AUTONET

Autonet is specially developed for the automotive refinishing industry. A combination of high performance and a longer lifespan than traditional abrasives gives a cost-effective solution. Designed for dry sanding by machine or by hand, its true dust-free sanding characteristics result in a cleaner work environment, as well as a better surface finish.
AVOMAX ANTISTATIC

AVOMAX ANTISTATIC

Is developed as an all-round product for various wood sanding applications. The open coating makes the product especially efficient for sanding materials that clog easily. The product works well for sanding soft materials and resinous wood types such as pine wood, while ensuring a long life time of the product and smooth surface finish. The strong antistatic paper provides dimensionally accurate and reliable wide belts. Full resin bonding and aluminium oxide grain guarantee a very durable product.
BASECUT

BASECUT

Basecut is the economical, high-efficiency choice for sanding paper. There are a host of productivity and efficiency features, including a high initial aggressive cut and a long working lifespan which ensures it’s a cost-effective choice.
CARATFLEX

CARATFLEX

A stearate-coated abrasive for dry sanding applications, Caratflex features fine stock removal, a uniform scratch pattern, a long lifespan and extremely good grain adherence. The backing consists of a flexible, latex-impregnated paper which is ideal for profile sanding.
COARSE CUT

COARSE CUT

A specially reinforced backing material and Mirka’s Progressive Bond™ dust-binding technology, make Coarse Cut ideal for all kinds of coarse sanding work. Features include, flexibility on rounded surfaces, excellent edge wear resistance and minimal clogging.
COMBI

COMBI

Combi features premium quality paper and cloth backing materials which produce a product with excellent edge wear resistance and durability that make it ideal for long-lasting machine sanding.
DEFLEX

DEFLEX

This durable, long–lasting sanding material is a multifunctional product that’s adaptable to suit most purposes. Deflex features a latex-impregnated paper which ensures smooth and flexible sanding even on surface edges.
ECOWET

ECOWET

Ecowet is ideal for manual wet sanding of lacquered surfaces between coats as well as for fixing defects in the lacquer. Ecowet is also suitable for removal of orange peel structure and for spot mark repair. The use of a sanding block is recommended, in order to obtain a smooth surface with a smooth sanding pattern.
FIBER A

FIBER A

Durable and flexible Fiber discs has firm dust binding properties, which is needed when removing lacquer and rust or when sanding down welding seams. Fiber A is specially developed for effective working on metal surfaces
FIBER CER

FIBER CER

Durable and flexible Fiber discs has firm dust binding properties, which is needed when removing lacquer and rust or when sanding down welding seams.
FIBER CER XF870

FIBER CER XF870

Durable and flexible Fiber discs has firm dust binding properties, which is needed when removing lacquer and rust or when sanding down welding seams.
FIBER ZIR

FIBER ZIR

Durable and flexible Fiber discs has firm dust binding properties, which is needed when removing lacquer and rust or when sanding down welding seams. Fiber Zir is specially developed for high-pressure sanding.
GOLD

GOLD

This durable, all-round sanding material is very well suited for high speed sanding in a multitude of applications. Gold features semi-open and special stearate coatings designed to prevent clogging and pill forming which helps achieve an optimal sanding result.
GOLD MAX

GOLD MAX

Gold Max is a stearate coated paper abrasive for intermediate and fine sanding applications. The antistatic E-paper gives good strength and stability to the product. The heat treated aluminium oxide enables a high cut rate even on harder paints. The semi-open special coating minimises clogging and increases the sanding lifetime. The backing ensures a good stability and offers a smooth surface finish. Gold Max is suitable for paint and lacquer sanding.
GOLD NC

GOLD NC

Gold NC has been developed for sanding of material that must not be contaminated with corrosive agents. The preparation of corrosion sensitive surfaces requires abrasive products which contain the lowest possible amount of heavy metals. Special procedures are applied throughout the production process of Gold NC to reduce the metal content. The tough, latex-coated base paper makes Gold NC a balanced, flexible product with good initial aggressivity and good durability. Gold NC has a surface layer of calcium stearate that provides good clogging resistance when sanding aluminium and when sanding other materials with high clogging tendency. Gold NC is suitable for sanding of aluminium and painted aluminium parts within the automotive industry.
GOLD PROFLEX

GOLD PROFLEX

Gold Proflex is a stearate coated abrasive paper for dry hand sanding of wood, fillers, paints and lacquers. The backing consists of a flexible, impregnated latex paper that provides desired flexibility and conformity in profile sanding operations as well as on flat surfaces. The paper has an anti-slip coating on the back side in order to provide good grip and feeling during the sanding. Gold Proflex has aluminium oxide grain, which provides a good cut and an excellent scratch pattern.
GOLD SOFT

GOLD SOFT

Gold Soft is a sanding disc, with optimal foam thickness. The semi-open grain coating minimises dust clogging and gives better cutting performance. The soft backing gives an excellent paint finish. A softer disc edge eliminates damages on profile sanding. Gold Soft P500 is suitable for primer sanding applications and P800 for matting clear coats.
GOLDFLEX

GOLDFLEX

Especially suited to profiled surfaces, Goldflex is a light, flexible latex paper for dry sanding. Its special stearate coating prevents clogging and pill forming.
GOLDFLEX SOFT

GOLDFLEX SOFT

The soft and flexible Goldflex Soft has been developed for sanding profiled surfaces and irregular, difficult-to-reach details by hand. Goldflex Soft is especially useful within the automotive industry and the car repair branch. The foam base is grip friendly and applies pressure evenly, which reduces the risk of sanding through the surface. The special stearate coating prevents clogging. Suitable for both dry and wet sanding.
HIFLEX

HIFLEX

Designed for automotive and wood applications, Hiflex features Mirka's Progressive Bond™ binding technology which makes it flexible and tear-resistant, whilst ensuring a high stock removal and excellent results. It's suitable for hand sanding operations and is available in sheets and rolls.
HIOLIT JF

HIOLIT JF

Hiolit JF is a new cloth backed product targeted towards wood and metal sanding applications. The product has a flexible backing making it optimal for profile sanding, seams, edges and other applications where a flexible product with high edge wear is needed. The semi-open coating makes the product universal and especially suited for soft and clogging materials.
HIOLIT XO

HIOLIT XO

Hiolit XO is a semi-open stiff universal abrasive for belt sanding and other machine sanding where it has excellent edge wear resistance and durability. In particular, it produces high quality results on challenging materials – for example, grits 36–80 are suitable for aggressive sanding, such as severe rust damage, as well as other sanding operations where large amounts of material need to be removed.
HIOMANT

HIOMANT

Suitable for sanding by hand or light machine, Hiomant offers effective stock removal and sanding results, combined with long term durability thanks to excellent edge wear resistance and minimal clogging.
IRIDIUM

IRIDIUM

Iridium is a premium paper abrasive for universal sanding. Perfected for speed and efficiency, it has a mix of ceramic and aluminium oxide grains on a flexible paper with precision coating that prevents clogging and reduces pilling. It practically repels dust and lifetime is increased as the grains stay sharp for longer. Dust extraction is optimised with multihole patterns for discs and strips. Iridium delivers amazing results on both soft and hard surfaces, making it the ideal paper abrasive choice for professionals in any industry.
JEPUFLEX ANTISTATIC

JEPUFLEX ANTISTATIC

Is a high class abrasive product with a wide application area. The focus of the optimization work has been the sanding of hard wood such as beech, birch and oak. The strong antistatic paper provides dimensionally accurate and reliable wide belts. Full resin bonding and aluminium oxide grain guarantee a very durable product. Silicon carbide grain used in the coarsest grit gives extra strength to the product. These qualities together with a well adjusted coating density make Jepuflex Antistatic a genuine all round product that works well also on metal, plastic and lacquer.
MI231A 3MIL

MI231A 3MIL

This micro–finishing film product is designed for the surface finishing of industrial rollers and automotive parts (crankshafts and camshafts). Depending on the application, there are two thicknesses of anti-slip backing film material available, 3 MIL or 5 MIL. MI231A is manufactured to the highest standard using the most technically advanced materials and processes, capable of producing a consistently high quality film product. MI231A has a semi-open grain distribution that will resist surface loading and produce consistently fine surface scratch patterns during use. Application can be wet with lubricants or dry.
MI231A 5MIL

MI231A 5MIL

This micro–finishing film product is designed for the surface finishing of industrial rollers and automotive parts (crankshafts and camshafts). Depending on the application, there are two thicknesses of anti-slip backing film material available, 3 MIL or 5 MIL. MI231A is manufactured to the highest standard using the most technically advanced materials and processes, capable of producing a consistently high quality film product. MI231A has a semi-open grain distribution that will resist surface loading and produce consistently fine surface scratch patterns during use. Application can be wet with lubricants or dry.
MI231C CC 5MIL

MI231C CC 5MIL

This micro–finishing film product is designed for the surface finishing of industrial rollers. The material is available on a 5 MIL antislip backing. MI231C is manufactured to the highest standard using the most technically advanced materials and processes, capable of producing a consistently high quality film product. MI231C has a semi-open grain distribution. Application can be wet with lubricants or dry.
MI231G 3MIL

MI231G 3MIL

This micro–finishing film product is designed for the surface finishing of industrial rollers, with a focus on softer surfaces. Depending on the application, there are two thicknesses of anti-slip backing film material available, 3 MIL or 5 MIL. MI231G is manufactured to the highest standard using the most technically advanced materials and processes, capable of producing a consistently high quality film product. MI231G has a semi-open grain distribution that will resist surface loading and produce consistently fine surface scratch patterns during use. Application can be wet with lubricants or dry.
MI231G 5MIL

MI231G 5MIL

This micro–finishing film product is designed for the surface finishing of industrial rollers, with a focus on softer surfaces. Depending on the application, there are two thicknesses of anti-slip backing film material available, 3 MIL or 5 MIL. MI231G is manufactured to the highest standard using the most technically advanced materials and processes, capable of producing a consistently high quality film product. MI231G has a semi-open grain distribution that will resist surface loading and produce consistently fine surface scratch patterns during use. Application can be wet with lubricants or dry.
MI232C 5MIL

MI232C 5MIL

This micro–finishing film product is designed for the surface finishing of industrial rollers, with a focus on softer surfaces. Depending on the application, there are two thicknesses of anti-slip backing film material available, 3 MIL or 5 MIL. MI232C is manufactured to the highest standard using the most technically advanced materials and processes, capable of producing a consistently high quality film product. MI232C has a semi-open grain distribution that will resist surface loading and produce consistently fine surface scratch patterns during use. Application can be wet with lubricants or dry.
MI241D

MI241D

This slurry-coated diamond film product is designed for very hard surfaces such as carbide, ceramics, composites and hardened metals. The material is available in a 5 MIL film in grit 60µ and in a 3 MIL film in grits 45µ, 30µ, 15µ, 9µ and 3µ. The grits are colour-coded. MI241D is manufactured with precisely graded diamonds producing a consistently high quality film product. MI241D has a smooth and strong polyester film backing to provide a consistent surface finish.
MICROSTAR

MICROSTAR

A general-purpose abrasive film product, designed for matting and paint rectification of top- and clear coat applications. Microstar has a special stearate layer and a smooth film backing. This product has a high quality finish and lasts longer as it doesn’t clog as easily as traditional products. Microstar produces a fine scratch pattern that is easy to polish out. For a perfect result, it is recommended to use Microstar with a 5 mm interface pad. Microstar is intended for dry sanding only.
MIRKON

MIRKON

A tough and durable sanding material, Mirkon is perfectly suited to the aggressive machine sanding of metal. Thanks to its polyester based cloth material it's highly durable and can take plenty of tough treatment. It's also very aggressive for calibration sanding.
MIRLON

MIRLON

Thanks to its special structure, Mirlon is a flexible, three-dimensional fibre sanding material that’s easy to use on profiled surfaces and produces an excellent finish. It’s ideal for matting of surfaces and creates an excellent base for the next lacquer layer.
MIRLON  NC

MIRLON NC

Mirlon NC is a product in the Mirlon family and can be used for matting of aluminium and painted aluminium parts. The product can be used wet as well as dry. Mirlon NC is a grain-coated non-woven product suitable for both hand sanding and machine sanding in processes where the sanded material must not become contaminated by corroding agents. Thanks to the three-dimensional construction and the high flexibility the product is easy to use on rounded surfaces and profiles.
MIRLON TOTAL

MIRLON TOTAL

Developed using Mirka’s innovative Total Coating™ Technology, Mirlon Total is more aggressive than Mirlon and produces a dense scratch pattern and rapid result. Suitable for use in wet and dry modes, it features an open and flexible structure and strengthened fibres which make it strong and long-lasting.
MIROX

MIROX

This universal paper for sanding by hand is economical to use and has a flexible construction which makes Mirox suitable for sanding both flat and profiled surfaces. The semi-open coating prevents clogging and guarantees a high quality surface finish.
NOVASTAR

NOVASTAR

Novastar is a premium film abrasive that tackles demanding applications with unexpected ease. It has a mix of ceramic and aluminium oxide grains on a flexible film backing, with a precision coating that practically repels dust. The grains stay sharp as clogging is prevented. Great durability and excellent edge wear resistance. Dust extraction optimised with multihole pattern. Fully waterproof. Novastar delivers remarkable results, especially on hard surfaces. Outstanding performance makes it the ideal film abrasive choice for professionals in any industry.
OSP

OSP

As the name suggests, the Optimized Sanding Process targets the entire process and this is a decisive factor. As well as maximizing the performance of every individual phase of the process, each step has also been optimized to work perfectly with all the other steps. Mirka’s OSP abrasives are clearly marked with numbers telling about which disc or strip should be used for each step. Number 1 is used for paint removal, number 2 for feather edge, number 3 for preparing the repaired area for primer by reducing scratches and expanding the feather edge and number 4 for finalising the sanding.
POLARSTAR

POLARSTAR

Especially developed to efficiently tackle the latest demanding coating applications, Polarstar quickly produces a fine, consistent surface finish and combines that with superb durability due to an excellent resistance to clogging. The polyester film backing material creates a more flexible and much smoother abrasive surface, compared to paper backing. In particular, it offers outstanding performance on hard tooling gel coats and scratch-resistant clear coats.
POLARSTAR SR

POLARSTAR SR

Polarstar SR is the first in a series of high-technology micro products produced by Mirka. This innovative curing technology is energy-saving with a low carbon footprint. This film abrasive is mainly developed for spot repair, used at car plants in the finessing- and hospital area of the paint shops. The Polarstar SR products are also used in the automotive refinish processes. This product is primarily designed for wet sanding, for correction of small painting defects and removal of dust particles in top coats and clear coats. Suitable for both machine and hand sanding.
POLARSTAR SR SIC

POLARSTAR SR SIC

Polarstar SR5 silicone carbide is a high-technology micro product produced by Mirka. This innovative curing technology is energy-saving with a low carbon footprint. This abrasive film is mainly developed for spot repair, used at car plants in the finessing- and hospital area of the paint shops. The Polarstar SR5 SIC film abrasive is also used in the automotive refinishing processes. This product is primarily designed for wet sanding, for correction of small painting defects and removal of dust particles in top coats and clear coats. Suitable for both machine and hand sanding.
Q.SILVER

Q.SILVER

With a backing consisting of a flexible and strong impregnated latex paper, Q-Silver features optimal aggressivity, resulting in fast and efficient stock removal. The high heat endurance of this fully resin bonded abrasive makes it ideal for tough tasks, such as 'down-to-metal' sanding operations.
Q.SILVER ACE

Q.SILVER ACE

Q.Silver Ace is a ceramic premium abrasive with paper backing for tougher universal sanding. The ceramic grains give a boost, especially when sanding harder applications and a strong resin bonding gives good grip adhesion to the backing.
SICA  CLOSED

SICA CLOSED

Designed for belt sanding and sanding of MDF and other materials containing mineral debris, Sica Closed is a fully anti-static product that's suitable for materials covered with water-based surface treatment coatings. It maintains its shape well and the silicon carbide grains produce less fibre rising and a finer scratch pattern than products using aluminium oxide grains. The result is a smoother sanded surface and a better final finish after surface treatment.
SICA  FINE

SICA FINE

Sica Fine is a fully anti-static product which minimises dust load and helps produce a high-quality surface finish. For example, it results in a perfect finish after surface treatment with a top lacquer - it even minimises lacquer usage.
SICA  FINE STEARATE

SICA FINE STEARATE

Sica Fine Stearate is a fully anti-static, 'stearate' product which produces minimal dust load and a high-quality surface finish. For example, you can expect a perfect result after surface treatment with a top lacquer - it even minimises lacquer using. Also available as Sica Fine without stearate.
SICA COARSE

SICA COARSE

Thanks to its ability to maintain even stock remove over its lifespan, Sica Coarse is ideal for calibration sanding of wood and MDF. Silicon carbide grains provide long lasting durability when performing heavy sanding operations and the open coating and anti-static characteristics minimise dust loading and prevent clogging.
SICA OPEN

SICA OPEN

Sica Open is the recommended solution for sanding soft, resin-rich wood types. The open coating and completely antistatic backing material and layers limit dust loading and prevent clogging which improves product lifespan. In addition, silicon carbide grains produce a smoother scratch pattern and a higher surface gloss level than aluminium oxide-based sanding materials.
ULTIMAX

ULTIMAX

Manufactured using a unique production process called ‘Selective Coating® Technology’ Ultimax features a series of tiny cavities designed into the abrasive material which work to efficiently prevent clogging. This innovative technology, along with special abrasive grains, produces aggressive performance and excellent edge wear resistance while keeping the sanding surface cool. Together these features ensure a longer lifespan and reduced material usage per job.
UNIMAX

UNIMAX

An all-round wood sanding product, Unimax maintains its shape and is completely antistatic. This reduces the belt dust load and minimises clogging which helps the machine stay cleaner and improves work safety while increasing belt lifespan.
WPF

WPF

WPF is the recommended product for manual wet sanding of plastics, lacquers and composite materials. The product features a latex-impregnated paper backing material and extra durable coating which helps produce a high quality finish, even on coarser surfaces. The range also includes small corrective sanding discs and roses used for spot repair. P3000 is available as corrective sanding discs only.
WPF NEXT GEN.

WPF NEXT GEN.

WPF Next Gen is the ideal paper abrasive for effective hand sanding both wet and dry on multiple surfaces. It is very flexible, fully waterproof and has great grain adhesion. Produced with new coating technology, the abrasive surface does not clog up easily, so you can sand faster and the abrasive lasts longer. Especially recommended for automotive refinishing due to the consistent surface finish. The finer grits are optimal for fresh clear coats and make polishing easier.