Backing Pads for Sanders

The Mirka backing pads for sanding machines are designed to meet the challenges set when performing demanding sanding operations. Mirka has developed backing pads for both sanding with traditional abrasives and for sanding dust-free with Mirka's Net Sanding dust extraction system. In order to achieve the best performance and a good sanding result, it is important to combine the right sander with the right accessories. Browse our backing pads and find the backing pads suitable for your sanders.

Adapter for Hand Sanding Blocks 20/28mm

Adapter for Hand Sanding Blocks 20/28mm

A 20/28 mm soft adapter, used with dust extraction hoses. Due to the softness, the adapter is easy to attach to the hand sanding block.
Backing Pad 135mm M14 Grip Soft Edge for Polisher

Backing Pad 135mm M14 Grip Soft Edge for Polisher

Backing pad 135 mm M14 soft.Used together with 150 mm polishing pads.

Backing Pad 150mm 5/16" Grip 6H Medium

Backing pad medium for grip discs.
Backing Pad 165mm M14 Grip Soft Edge for Polisher

Backing Pad 165mm M14 Grip Soft Edge for Polisher

Backing pad 165 mm M14 soft. Used together with 180 mm polishing pads.

Backing Pad Net 150mm 5/16" Grip 51H Med

Backing pad medium for net discs. Delivered with a pad saver and user instructions.

Backing Pad UNI 150mm 5/16"+ M8 Grip 57H Medium

Uni-Backing Pad for grip discs. Delivered with one Pad Protector and user instructions. This pad is suitable for Festool Multi-Jetstream system.

Backing Pad UNI 150mm 5/16"+ M8 Grip 61H Hard

Abranet hard density Unipad 150 mm (6") for all hole combinations. This Abranet unipad is optimized for flat surfaces and has a high edge durability. 15 larger holes allow use of conventional discs with 6 h, 6 + 1 h, 9 h and 15 h. Suitable for narrow shroud machines but not recommended to be used with 150 mm ROS machines, because the combination of Unipad + wide/Abranet shroud machines does not give the optimal dust extraction. Delivered with one 150 mm (6") pad saver. To ensure correct installation, always use the supplied spacing washers, making sure that a minimum gap exists between the sander’s shroud and the top part of the backing pad, to prevent friction between the two parts. Tighten the screw hard. The backing pad should never turn idle. From time to time, check that the screw is well tight.
Bracket Kit for CEROS Power

Bracket Kit for CEROS Power

Brackets kit for Mirka CEROS power for Mirka Dust Extractors 412/415 or 912/915.
Cleaning Clay 200g

Cleaning Clay 200g

Use Mirka's Cleaning Clay for removal of paint overspray, industrial fall-out (rail dust/metal foundry dust, asphalt, insects etc.), tree sap and bug residue from paintwork, glass, plastic, aluminium and chrome surface. Mirka Cleaning Clay is gentle to surface, leaves no scratches and ensures an excellent finish.
Cleaning Cloth Micro Fiber 330x330mm Yellow,2/Pack

Cleaning Cloth Micro Fiber 330x330mm Yellow,2/Pack

A yellow soft micro fiber cloth, with a fine structure. Absorbs residue well and is washable. Packed 2 pcs/bag.
Cleaning Tool for Lambswool Pad

Cleaning Tool for Lambswool Pad

The pad cleaning tool is a hand-held cleaning tool for wool and foam pads. Use the wheels to clean the pads by rolling the tool over the spinning pad. Use the abrasive plates on the side to level and reshape foam pads.
DC Cable Male Plug for CEROS

DC Cable Male Plug for CEROS

Dry Guide Coat Black 100g

Dry Guide Coat Black 100g

The Dry Guide Coat has excellent covering properties. The powder makes all imperfections and scratches visible. This unique applicator leaves an even powder coating. The applicator has flexible edges which makes it easy to use on contoured areas. This is a great tool in guiding the operator through the sanding process and achieving a perfect result. The black powder is used for light colour surfaces.
Exhaust Fitting Kit 28mm for CEROS

Exhaust Fitting Kit 28mm for CEROS

Fastening Straps Kit 6/Pack

Fastening Straps Kit 6/Pack

This fastening strap kit give the possibility to attach the electrical cord to the vacuum hose.
Foam Tape 13mm x 50m

Foam Tape 13mm x 50m

The high density traditional soft foam tape for sealing of all common bodywork gaps. Mirka’s soft foam tape has a high quality adhesion that ensures safe adhesion even when repositioned. It is also easy to remove after use. The high density soft foam gives flexible positioning in angels as well as a quick and proper sealing.
Hose 20mm x 4m for Hand Sanding Blocks

Hose 20mm x 4m for Hand Sanding Blocks

Hose for hand sanding blocks.
Hose 27mm x 0,5m + Connector

Hose 27mm x 0,5m + Connector

This adapter + hose is suitable for all Mirka pneumatic sanders.
Hose 27mm x 4m + Connector

Hose 27mm x 4m + Connector

Flexible suction hose connecting the sander and the dust extractor. Please note that this hose is conical. The benefit of having a conical dust extractor hose is that it improves the dust suction.
Hose 27mm x 5,5m with Integrated Pneumatics

Hose 27mm x 5,5m with Integrated Pneumatics

This Pneumatic Hose Assembly is ergonomic and has a weight of 1850 grams only. It has a high flexibility and is fully conductive. This hose can be directly connected to all our pneumatic CV machines.
Interface 115x230mm 32H 10mm, 1/Pack

Interface 115x230mm 32H 10mm, 1/Pack

The 7 mm thick interface strip is used in combination with hook & loop sanding strips for sanding rounded surfaces and contours.
INTERFACE 150mm 15H 5/PACK

INTERFACE 150mm 15H 5/PACK

The 7 mm thick interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.
Interface 150mm 67H 10mm, 5/Pack

Interface 150mm 67H 10mm, 5/Pack

The 10 mm thick multi interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours, with Mirka's net products.
Interface 70x125mm 13H 10mm, 1/Pack

Interface 70x125mm 13H 10mm, 1/Pack

A flexible interface for hand sanding blocks. This 7 mm thick interface strip is used in combination with hook & loop sanding strips for sanding rounded surfaces and contours.
Interface 70x198mm 56H 10mm, 5/Pack

Interface 70x198mm 56H 10mm, 5/Pack

A flexible interface for hand sanding blocks. This 7 mm thick interface strip is used in combination with hook & loop sanding strips for sanding rounded surfaces and contours.
Lambswool Pad 150mm Grip, 2/Pack

Lambswool Pad 150mm Grip, 2/Pack

Lambs' wool pad 6" 150 mm 2-pack
MIRKA 5S TROLLEY

MIRKA 5S TROLLEY

MIRKA CASE FOR CEROS 400x300x158mm

MIRKA CASE FOR CEROS 400x300x158mm

Multiuse Overspray Protection Sheet 4m x 150m

Multiuse Overspray Protection Sheet 4m x 150m

Pad Saver 150mm 67H, 5/Pack

Pad Saver 150mm 67H, 5/Pack

This pad saver for backing pads has a 3 mm protective interface.
Pad Saver 70x198mm 56H, 5/Pack

Pad Saver 70x198mm 56H, 5/Pack

This pad saver for backing pads has a 3 mm protective interface.
Polishing Foam Pad 150mm Black Dotted, 2/Pack

Polishing Foam Pad 150mm Black Dotted, 2/Pack

Black dotted foam pad 6" 150x25 mm 2-pack
Polishing Foam Pad 180x25mm Black Flat, 2/Pack

Polishing Foam Pad 180x25mm Black Flat, 2/Pack

Black flat foam pad 7,5" 180x30 mm 2-pack
Polishing Foam Pad 77mm Black Dotted, 2/Pack

Polishing Foam Pad 77mm Black Dotted, 2/Pack

Black dotted foam pad 3" 77x25 mm 2-pack
Shroud 150mm for CEROS

Shroud 150mm for CEROS

Twisted Wool Pad 150mm Grip

Twisted Wool Pad 150mm Grip

Twisted wool pad 6" 150 mm
Twisted Wool Pad 180mm Double Sided

Twisted Wool Pad 180mm Double Sided

Twisted wool pad 7,5" 180 mm double sided
Twisted Wool Pad 180mm Grip

Twisted Wool Pad 180mm Grip

Twisted wool pad 7,5" 180 mm
Vacuum Block Disc 150mm, 5/Pack

Vacuum Block Disc 150mm, 5/Pack

The vacuum block discs should be used if the vacuum dust extraction cannot be disconnected during wet sanding. The vacuum block disc protects your sander and dust extraction system, since it prevents moisture from entering the sander.