Dry Guide Coat

Adapter for Hand Sanding Blocks 20/28mm

A 20/28 mm soft adapter, used with dust extraction hoses. Due to the softness, the adapter is easy to attach to the hand sanding block.

Backing Pad 135mm M14 Grip Soft Edge for Polisher

Backing pad 135 mm M14 soft.Used together with 150 mm polishing pads.

Backing Pad 150mm 5/16" Grip 6H Medium

Backing pad medium for grip discs.

Backing Pad 165mm M14 Grip Soft Edge for Polisher

Backing pad 165 mm M14 soft. Used together with 180 mm polishing pads.

Backing Pad Net 150mm 5/16" Grip 51H Med

Backing pad medium for net discs. Delivered with a pad saver and user instructions.

Backing Pad UNI 150mm 5/16"+ M8 Grip 57H Medium

Uni-Backing Pad for grip discs. Delivered with one Pad Protector and user instructions. This pad is suitable for Festool Multi-Jetstream system.

Backing Pad UNI 150mm 5/16"+ M8 Grip 61H Hard

Abranet hard density Unipad 150 mm (6") for all hole combinations. This Abranet unipad is optimized for flat surfaces and has a high edge durability. 15 larger holes allow use of conventional discs with 6 h, 6 + 1 h, 9 h and 15 h. Suitable for narrow shroud machines but not recommended to be used with 150 mm ROS machines, because the combination of Unipad + wide/Abranet shroud machines does not give the optimal dust extraction. Delivered with one 150 mm (6") pad saver. To ensure correct installation, always use the supplied spacing washers, making sure that a minimum gap exists between the sander’s shroud and the top part of the backing pad, to prevent friction between the two parts. Tighten the screw hard. The backing pad should never turn idle. From time to time, check that the screw is well tight.

Bracket Kit for CEROS Power

Brackets kit for Mirka CEROS power for Mirka Dust Extractors 412/415 or 912/915.

Cleaning Clay 200g

Use Mirka's Cleaning Clay for removal of paint overspray, industrial fall-out (rail dust/metal foundry dust, asphalt, insects etc.), tree sap and bug residue from paintwork, glass, plastic, aluminium and chrome surface. Mirka Cleaning Clay is gentle to surface, leaves no scratches and ensures an excellent finish.

Cleaning Cloth Micro Fiber 330x330mm Yellow,2/Pack

A yellow soft micro fiber cloth, with a fine structure. Absorbs residue well and is washable. Packed 2 pcs/bag.

Cleaning Tool for Lambswool Pad

The pad cleaning tool is a hand-held cleaning tool for wool and foam pads. Use the wheels to clean the pads by rolling the tool over the spinning pad. Use the abrasive plates on the side to level and reshape foam pads.

DC Cable Male Plug for CEROS

Dry Guide Coat Black 100g

The Dry Guide Coat has excellent covering properties. The powder makes all imperfections and scratches visible. This unique applicator leaves an even powder coating. The applicator has flexible edges which makes it easy to use on contoured areas. This is a great tool in guiding the operator through the sanding process and achieving a perfect result. The black powder is used for light colour surfaces.

DUST BUSTER TACK CLOTH 320 x 950mm

Exhaust Fitting Kit 28mm for CEROS

Fastening Straps Kit 6/Pack

This hook and loop fastening strap kit give the possibility to attach the electrical cord to the vacuum hose.

Foam Tape 13mm x 50m

The high density traditional soft foam tape for sealing of all common bodywork gaps. Mirka’s soft foam tape has a high quality adhesion that ensures safe adhesion even when repositioned. It is also easy to remove after use. The high density soft foam gives flexible positioning in angels as well as a quick and proper sealing.

Hose 20mm x 4m for Hand Sanding Blocks

Hose for hand sanding blocks.

Hose 27mm x 0,5m + Connector

This adapter + hose is suitable for all Mirka pneumatic sanders.

Hose 27mm x 4m + Connector

Flexible suction hose connecting the sander and the dust extractor. Please note that this hose is conical. The benefit of having a conical dust extractor hose is that it improves the dust suction.

Hose 27mm x 5,5m with Integrated Pneumatics

This Pneumatic Hose Assembly is ergonomic and has a weight of 1850 grams only. It has a high flexibility and is fully conductive. This hose can be directly connected to all our pneumatic CV machines.

Interface 115x230mm 32H 10mm, 1/Pack

The 10 mm thick interface strip is used in combination with hook & loop sanding strips for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

INTERFACE 150mm 15H 5/PACK

The 7 mm thick interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 150mm 67H 10mm, 5/Pack

The 10 mm thick multi hole interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 70x125mm 13H 10mm, 1/Pack

A flexible interface for hand sanding blocks. This 7 mm thick interface strip is used in combination with hook & loop sanding strips for sanding rounded surfaces and contours.

Interface 70x198mm 56H 10mm, 5/Pack

A flexible interface for hand sanding blocks. This 10 mm thick interface strip is used in combination with hook & loop sanding strips for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Lambswool Pad 150mm Grip, 2/Pack

Lambs' wool pad 6" 150 mm 2-pack

MIRKA 5S TROLLEY

MIRKA CASE FOR CEROS 400x300x158mm

Multiuse Overspray Protection Sheet 4m x 150m

Pad Saver 150mm 67H, 5/Pack

Pad saver for 150mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 70x198mm 56H, 5/Pack

Pad saver for 70x198mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding strips, should be changed regularly. The pad savers prolong the life of the backing pad.