Interfaces

Mirka is offering interface pads for both net and traditional abrasives. By using an interface pad you will get a softer sanding result. The interface pad is placed between the backing pad and the abrasive.

Interface 125mm 33H 10mm, 5/Pack

Interface 125mm 33H 10mm, 5/Pack

The 10 mm thick multi hole interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.
Interface 125mm 33H 5mm, 1/Pack

Interface 125mm 33H 5mm, 1/Pack

The 5 mm thick multi hole interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.
Interface 125mm 33H 5mm, 5/Pack

Interface 125mm 33H 5mm, 5/Pack

The 5 mm thick multi hole interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.
Interface 125mm 44H 10mm, 1/Pack

Interface 125mm 44H 10mm, 1/Pack

The 10 mm thick multi interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.
Interface 125mm 44H 10mm, 5/Pack

Interface 125mm 44H 10mm, 5/Pack

The 10 mm thick multi interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.
Interface 125mm 44H 5mm, 5/Pack

Interface 125mm 44H 5mm, 5/Pack

The 5 mm thick multi hole interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. The pad is developed to be used for light profile sanding, Paint Preparation sanding, Factory Primer (E-Coat) sanding and Top- and Clear Coat sanding. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.
Interface 125mm 5H 5/Pack

Interface 125mm 5H 5/Pack

The 7 mm thick interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.
Interface 150mm 15H 5/Pack

Interface 150mm 15H 5/Pack

The 7 mm thick interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.
Interface 150mm 67H 10mm, 5/Pack

Interface 150mm 67H 10mm, 5/Pack

The 10 mm thick multi hole interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The interface pad is placed between the backing pad and the sanding disc.
Interface 150mm 67H 5mm Maruti Suzuki, 5/Pack -280

Interface 150mm 67H 5mm Maruti Suzuki, 5/Pack -280

Interface 150mm 67H 5mm, 5/Pack

Interface 150mm 67H 5mm, 5/Pack

The 5 mm thick multi hole interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. The pad is developed to be used for light profile sanding, Paint Preparation sanding, Factory Primer (E-Coat) sanding and Top- and Clear Coat sanding. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.
Interface 200mm 89H 7mm, 1/Pack

Interface 200mm 89H 7mm, 1/Pack

This interface is suitable for use with 8" 200 mm 89 holes Net backing pad, 8295885111. The backing pad has been developed to be used with the 200 mm two-handed sander Mirka® ROS2 850CV. The 7 mm thick interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.
Interface 225mm 25H for Mirka LEROS, 1/Pack

Interface 225mm 25H for Mirka LEROS, 1/Pack

5 mm thick soft interface for Mirka® LEROS backing pads. The interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.
Interface 225mm 25H for Mirka LEROS, 3/Pack

Interface 225mm 25H for Mirka LEROS, 3/Pack

5 mm thick soft interface for Mirka® LEROS backing pads. The interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.
Interface 225mm 8+1H 15mm Hard, 1/Pack

Interface 225mm 8+1H 15mm Hard, 1/Pack

A hard, 15 mm thick interface pad suitable for Miro 955/955S dry wall sanders. This interface is only to be used with Mirka's Net discs or Gold 16 holes discs. The interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.
Interface 225mm 8+1H 17mm Medium, 1/Pack

Interface 225mm 8+1H 17mm Medium, 1/Pack

A medium hard,17 mm thick interface suitable for Miro 955/955S dry wall sanders. This interface is only to be used with Mirka's Net discs or Gold 16 holes discs. The interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.
Interface 70x125mm 13H 10mm, 5/Pack

Interface 70x125mm 13H 10mm, 5/Pack

A flexible interface for hand sanding blocks. This 10 mm thick interface strip is used in combination with grip sanding strips for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.
Interface 70x198mm 56H 10mm, 1/Pack

Interface 70x198mm 56H 10mm, 1/Pack

A flexible interface for hand sanding blocks. This 10mm thick interface strip is used in combination with grip sanding strips for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.
Interface 70x198mm 56H 10mm, 5/Pack

Interface 70x198mm 56H 10mm, 5/Pack

A flexible interface for hand sanding blocks. This 10 mm thick interface strip is used in combination with grip sanding strips for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.
Interface 77mm 6H 5mm, 5/Pack

Interface 77mm 6H 5mm, 5/Pack

The 5 mm thick multi interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours, with Mirka's net products. Using the multi interface pad will also produce a softer result. The interface pad is placed between the backing pad and the sanding disc.
Interface 80x230mm 55H 5mm, 1/Pack

Interface 80x230mm 55H 5mm, 1/Pack

This interface is specially developed for the Mirka Handy hand sanding block. The 5 mm thick interface pad is used in combination with grip sanding sheets for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding sheet.
Interface 81x133mm 54H 7mm, 5/Pack

Interface 81x133mm 54H 7mm, 5/Pack

A flexible 7 mm thick interface pad, suitable for hand sanding or for orbital sanders. The interface pad is used in combination with grip sanding sheets for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding sheet.