Mirka® PRO Finishing Solution
Easy and Fast Solution for Professional Spot Repair
Mirka's innovative tools and abrasives combined with the newly released PRO Iridium™ 1250 polishing compound make for a simple, fast, and reliable system for a high-quality surface finish.
From sanding to polishing to a perfect finish
Complete Solution for Removing Defects
The Mirka PRO Finishing Solution consists of several Mirka products, all working together to help you perform better.
Sand the imperfection away using Mirka's cordless spot repair sanders together with Mirka Iridium® SR spot repair discs, moving on to cordless polishing with Mirka PRO polishing pads, together with the Mirka PRO Iridium™ 1250 compound.
- Mirka AOS-B cordless sander
- Mirka AROP-B cordless polisher
- Mirka Iridium® SR spot repair discs
- Mirka PRO polishing pads
- Mirka PRO Iridium™ 1250 compound
Supporting your business through technical development
At the frontline of the business, we believe that training, shared knowledge, quality products and systems make the bodyshop a better place to work for the individual.
To support this Mirka has a national team of ATA trained staff who have over 150 years repair industry experience between them and are able to provide a hands-on approach to support businesses.
Only polish once with the Pro Iridium™ 1250 compound
One Step Solution
The water-based Mirka PRO Iridium™ 1250 compound is the final piece of the puzzle in the finishing solution.
Previously, removing surface defects has been done with a two-step process, with initial spot sanding followed by scratch removal, with another polishing compound needed for a glossy finish. With the PRO Iridium™ 1250, you only need to polish once.
Ergonomic and efficient
The PRO Finishing Solution goes hand in hand with Mirka's selection of cordless tools. Spot repair and polishing can be done free from cords, focusing on the task, going for the perfect finish. Mirka's smooth-running and quiet cordless tools get you closer to the surface, with the batteries lasting a long time in spot repair usage.
On a yearly basis, there is potential to save significant amounts of energy compared to a pneumatic tool - bringing the cost of one spot repair down even further.
A better choice for you and the environment
All polishes that Mirka produces are water-based and produced in Finland. There are many benefits of choosing a water-based polishing compound.
- Effective permanent removal of scratches - Water-based compounds remove scratches permanently. Solvent-based compounds can lose gloss after cleaning the surface with a degreaser and in some cases, they may only temporarily hide the scratches.
- Safer for the operator - No hazardous chemicals
- Sustainable - Water-based polishes are better for the environment and do not contain benzene or similar hazardous chemicals.