Preassembled 4m hose with connector and CE 230V cable in a durable sleeve. The sleeve makes handling easier and protects the work surface from scratches. Designed to be used with Mirka® DEROS, Mirka® DEOS and Mirka® LEROS.

Preassembled 10m hose and CE 230V cable in a 3,5m durable sleeve. The sleeve makes handling easier and protects the work surface from scratches. The part of the hose and cable not covered by the sleeve is held together by hook and loop straps. Connector is included. Designed to be used with Mirka® DEROS, Mirka® DEOS and Mirka® LEROS.

This 5 m hose for Mirka hand sanding blocks can be connected to existing Mirka dust extraction hose assemblies. The hose is conductive, which leads the sparks from static electricity (common in hand sanding) to the grounded dust extractor.

Dust extraction hose with integrated electric cable. The extended length (5,5 m) ensures better movability. This hose is designed to be used with Mirka® DEROS, Mirka® DEOS and Mirka® LEROS (EU-plug versions).

This Pneumatic Hose Assembly is 10m long, and can be directly connected to all our pneumatic CV machines.

Dust extraction hose with integrated electric cable. The extended length (10 m) gives more possibilities for movability. This hose is designed to be used with Mirka® DEROS, Mirka® DEOS and Mirka® LEROS (EU-plug versions).

This 10 m extension hose can be cut into the desired length and connected to the MIN6519411 hose. Note that the hose adapter 32/54 mm should be removed. The extension hose can not be connected to the Mirka sanders directly. The hose is cylindrical with the same diameter throughout the whole length of the hose.

When fixed on a Mirka 20 mm dust extraction hose, this connector enables a quick and smooth change of the hose from one Mirka hand sanding block to another.

Connector for air + electric hoses. Comes with the following hoses: MIE6514511, MIE6514711, 8992514511, 8992514711 and 8992515011.

This conductive adapter enables a quick change between Mirka power tools with 19/20 mm dust extraction fittings, e.g. Mirka OS383CV. Fix this adapter on each tool and connect/disconnect to/from any Mirka hose assembly.

A clean-up kit with a brush nozzle for dust extractors. The brush nozzle makes the kit more versatile. The dimension of the hose is 34/40 mm (outer diameter) x 4 m and the length for the stainless steel tubes is 500 mm x 2.
20/20mm Łącznik rur

20/20mm Łącznik rur

Hose swivel connector Ø 20/20 mm. Enables the connection of two hoses with the diameter 20 mm.
Adapter + Rura 27 x 0,5 m

Adapter + Rura 27 x 0,5 m

This adapter + hose is suitable for all Mirka pneumatic sanders.
Adapter do hebli 20/28 mm

Adapter do hebli 20/28 mm

A 20/28 mm soft adapter, used with dust extraction hoses. Due to the softness, the adapter is easy to attach to the hand sanding block.
HOSE ASSEMBLY 415/915 32mm x 5,5m

HOSE ASSEMBLY 415/915 32mm x 5,5m

This Pneumatic Hose Assembly is ergonomic with a weight of just 1850 grams. It is very flexible and fully conductive. This hose can be directly connected to all our pneumatic CV machines.
MPA0412 hadice 1,8 m pro se samoodsáváním

MPA0412 hadice 1,8 m pro se samoodsáváním

Wąż 20 mmx 4 m

Wąż 20 mmx 4 m

Hose for hand sanding blocks.
Wąż antystatyczny z adapterem 28 mm x 10 m

Wąż antystatyczny z adapterem 28 mm x 10 m

A flexible suction hose connecting the sander and the dust extractor. Please note that this hose is conical. The conical dust extractor hose is designed to improve dust suction.
Wąż antystatyczny z adapterem 28 mm x 4 m

Wąż antystatyczny z adapterem 28 mm x 4 m

A flexible suction hose connecting the sander and the dust extractor. Please note that this hose is conical. The conical dust extractor hose is designed to improve dust suction.
Wąż do szlifierki MIRO 4 m

Wąż do szlifierki MIRO 4 m