Adapter for Dust Extractor 30-48mm

Adapter for connecting the dust extractor hose to the dust extractor. Can be cut to fit dust extractors of other brands. Electrical conductive (≤ 10⁶ Ω/square).

Adapter for Hand Sanding Blocks 20/28mm

A 20/28 mm soft adapter, enabling the use of Ø 27mm dust extraction hoses with the hand sanding blocks. Thanks to the softness, the adapter is easy to attach to the hand sanding block. Electrical conductive (≤ 10⁶ Ω/square).

Clean-Up Kit for Dust Extractors

A clean-up kit with a brush nozzle for dust extractors. The brush nozzle makes the kit more versatile. The hose is 4 m (Ø 32mm) and the length for the stainless steel tubes is 500 mm x 2.

Clean-Up Kit without Hose

A Clean-Up Kit for Dust extractors. Hose and connector are not included in this kit. Suitable hose with a connector included would be MIN6519411 (4m) or MIN6519211 (10m).

Connector Air Inlet for Hand Sanding Block 20/20mm

When fixed on a Mirka 20 mm dust extraction hose, this connector enables a quick and smooth change of the hose from one Mirka hand sanding block to another.

Connector for Air+Electric Hoses with threads

Connector for air and electric hoses with threads. This adapter is close to the dust extractor, where the pneumatic tube/electrical cable comes out. Electrical conductive (≤ 10⁶ Ω/square). The adapter comes with the following hoses: MIE6514511, MIE6514711, 8992514511, 8992514711 and 8992515011.

Extension Hose 32mm x 10m

This 10 m extension hose can be cut into the desired length and connected to the MIN6519411 hose. Note that the hose adapter 32/54 mm should be removed. The extension hose can not be connected to the Mirka sanders directly. The hose is cylindrical with the same diameter throughout the whole length of the hose.

Hose 1,8m MPP9023 for PROS DB

1,8m long dust suction hose and pneumatic cable. Suitable for Mirka PROS 550DB and 650DB. (Mirka code: 8995550211 and 8995650211)

Hose 20mm x 0,5m + Connector

This conductive adapter enables a quick and easy change between Mirka® power tools with 19/20 mm dust extraction fittings. Fix the adapter on the tool and connect to any Mirka hose assembly. Electrical conductive (≤ 10⁶ Ω/square).

Hose 20mm x 4m for Hand Sanding Blocks

Hose for hand sanding blocks. Electrical conductive (≤ 10⁶ Ω/square). The smallest end of rubber bung measures 35mm and the large end measures 58mm

Hose 20mm x 5m for Hand Sanding Blocks

This 5 m hose for Mirka hand sanding blocks can be connected to existing Mirka dust extraction hose assemblies. The hose is conductive, which leads the sparks from static electricity (common in hand sanding) to the grounded dust extractor. Electrical conductive (≤ 10⁶ Ω/square).

Hose 25,4mm+Adapter 38mm MPA0392

Hose 27mm x 0,5m + Connector

This adapter + hose is suitable for all Mirka pneumatic sanders. Electrical conductive (≤ 10⁶ Ω/square).

Hose 27mm x 10m + Connector

A flexible suction hose connecting the sander and the dust extractor. Please note that this hose is conical. The conical dust extractor hose is designed to improve dust suction. Electrical conductive (≤ 10⁶ Ω/square).

Hose 27mm x 10m with Integrated Pneumatics

This Pneumatic Hose Assembly is 10m long, and can be directly connected to all our pneumatic CV machines. Electrical conductive (≤ 10⁶ Ω/square).

Hose 27mm x 15m with Integrated Pneumatics

This Pneumatic Hose Assembly is 15m long, and can be directly connected to all our pneumatic CV machines.

Hose 27mm x 4m + Connector

A flexible dust suction hose connecting the sander and the dust extractor. Please note that this hose is conical. The conical dust suction hose is designed to improve dust suction. Electrical conductive (≤ 10⁶ Ω/square).

Hose 27mm x 5,5m with Integrated Pneumatics

This Pneumatic Hose Assembly is ergonomic with a weight of just 1850 grams. It is very flexible and fully conductive. This hose can be directly connected to all our pneumatic CV machines. Electrical conductive (≤ 10⁶ Ω/square).

Hose 28mmx1,8m MPA0412

Hose 4m for Miro 955/955-S

Dust extraction hose for Mirka® Miro 955 and 955-S. Antistatic (≤ 10¹¹ Ω/square)

Hose Adapter 28mm/56mm 15369

Mirka Orbital Sander Hose Adapter

Hose Adapter 32/54mm

Hose adapter Ø 32/54 mm for Mirka dust extractors. The adapter connects the hose into the dust extractor. Electrical conductive (≤ 10⁶ Ω/square). Delivered together with the following hoses: MIE6514511 / MIE6514511US, MIE6514711 / MIE6514711US,MIN6519411, MIN6519711, 8992514511, 8992514711 and 8992515011.

Hose Connector 32/32mm

Hose connector with diameter 32/32 mm. Delivered together with extension hose MIN6519711. Enables connection with the hose MIN6519411. Electrical conductive (≤ 10⁶ Ω/square).

Hose Sleeve

Hose Sleeve No. 30928 for DE 415/915

Hose Swivel Adapter 20/25,4mm

Hose swivel adapter 20/27 mm. Enables connecting a Ø 20 mm hose with a Ø 27 mm hose.

Hose Swivel Adapter 27/27mm

Hose swivel connector Ø 27/27 mm. Enables the connection of two hoses with the diameter 27 mm.

Hose Swivel Connector 20/20mm

Hose swivel connector Ø 20/20 mm. Enables the connection of two hoses with the diameter 20 mm.

Mirka Connector for Air+Electric Hoses

Connector for air + electric hoses. Electrical conductive (≤ 10⁶ Ω/square). Comes with the following hoses: MIE6514511, MIE6514711, 8992514511, 8992514711 and 8992515011.

Quick Connector, Soft 25,4mm

A Soft Quick connector that enables a quick and easy change of tool to the vacuum hose. Suitable for all models of Mirka® DEROS, DEOS, LEROS and PROS. Please note that this quick connector is without swivel function and therefore is not suitable for the DecoSander.

Soft Connector 27mm

Soft Connector, connects the sander to the dust extractor hose Ø 27 mm. Electrical conductive (≤ 10⁶ Ω/square). Suitable for all Mirka® DEOS, Mirka® DEROS, Mirka® LEROS and Mirka® PROS machines. Also suitable for the Mirka® Decosander and the Dust Suction Hood, as well as sanders of most other brands. Not suitable for Mirka® OS, Mirka® ROS nor Mirka® CEROS.