Air Flow Cover Kit

Airguide for DE 1230 L

Airguide for DE 1230 M

Backing Pad 125mm 5/16" Grip Medium

125mm backing pad for grip discs. No holes and medium hard.

Backing Pad 150mm 5/16" Grip Medium

Backing pad for grip discs. No holes and medium hard.

Backing Pad 225mm 25H Grip for Mirka LEROS

225 mm backing pad designed for Mirka® LEROS 950CV. This grip backing pad is designed to be used together with an interface (MIW9534611). Best combined with Abranet net sanding abrasive for a smooth and fast surface finish.

Backing Pad 225mm 25H Grip LEROS + 8 screws

Backing pad 225mm designed for Mirka® LEROS 950CV. This backing pad is endowed with both grips and screws, for maximal attachment of the interface. Recommended to be used together with an interface (MIW9534611) and best combined with Abranet net sanding abrasive for a smooth and fast surface finish.

Backing Pad 225mm 25H Plain for LEROS + 8 Screws

Backing pad 225mm designed for Mirka® LEROS 950CV. This plain backing pad has to be used together with an interface (MIW9534611), which is attached to the backing pad with included screws. Best combined with Abranet net sanding abrasive for a smooth and fast surface finish.

Backing Pad 32mm PSA Soft, 5/Pack

Female no hole PSA soft backing pad with an even surface.

Backing Pad 34mm Grip Medium, 10/Pack

Quick Lock pad 34mm Grip medium. Suitable for Mirka® AOS 130NV sander.

Backing Pad 70x198mm Grip 56H Medium

Grip backing pad for orbital sanders. Delivered with one pad protector and user instructions.

Backing Pad 75x100mm Grip 33H Medium

Grip backing pad for pneumatic orbital sanders. Delivered with one pad protector and user instructions.

Backing Pad 77mm 1/4" Grip 6H Medium

Backing pad for 77mm grip discs. 6H and medium hard. This backing pad is delivered with a pad saver including user instructions.

Backing Pad 77mm 1/4" Grip Medium

Backing pad for 77mm grip discs. No holes and medium hard.

Backing Pad 81x133mm Grip 54H Medium

Grip backing pad for pneumatic orbital sanders. Delivered with one pad protector and user instructions.

Backing Pad Net 100x152x152mm Grip 32H Medium

Backing pad suitable for the Mirka® DEOS Delta sander.

Backing Pad Net 125mm 5/16" Grip 28H 130g Medium

Fits all Mirka® 150 mm (6”) sanders. This 130g backing pad gives you the ability to switch sizes and use 125 mm (5”) sanding discs.

Backing Pad Net 125mm 5/16" Grip 28H Medium

A 125 mm backing pad with a central air inlet. The air channels leading to the center of the backing pad has an increased air flow and therefore the dust is removed efficiently. This backing pad is suitable for our multihole configuration 125 mm (5”) 17H, available in the Gold product range. This backing pad can also can be used on Festo (8+1H), Bosch (8H) and Black & Decker machines.

Backing Pad Net 150mm 5/16" Grip 48H Medium

A 150 mm (6”) backing pad with a central air inlet. The air channels leading to the center of the backing pad has an increased air flow and therefore the dust is removed efficiently.

Backing Pad Net 200mm Grip 89H Medium for ROS2 850

This 200 mm (8 in.) Net Backing Pad with 89 holes is unique and designed only for MIRKA ROS2-850CV two-handed randon orbital sander.

Backing Pad Net 70x198mm Grip 48H Medium

Grip backing pad for electric orbital sanders.

Backing Pad Net 81x133mm Grip 46H Medium

Grip backing pad for electric orbital sander.

Backing Pad Quick Lock 32mm Grip Soft, 10/Pack

Quick Lock pad 32mm Grip soft. Suitable for Mirka® ROS 150NV, Mirka® AOS 130NV, Mirka® AOS-B 130NV and Mirka® AROS-B 150NV sanders

Backing Pad Quick Lock 32mm PSA Hard, 10/Pack

Backing Pad Quick Lock 32mm PSA Soft, 10/Pack

Quick Lock pad 32mm PSA soft. Suitable for Mirka® ROS 150NV, Mirka® AOS 130NV, Mirka® AOS-B 130NV and Mirka® AROS-B 150NV sanders

Backing plate for DEOS 81x133mm

Backing plate for Mirka DEOS 70x198mm

Backing Plate Screw Kit

Balancing Housing Screw Kit

Balancing Screw Kit for DEROS/PROS

A tool kit for reducing vibrations when sanding with pad saver or interface. Disconnect air supply/power cable. Remove the backing pad and add hex nuts and screws. Tighten to 2 Nm.

Balancing Weight 100x152x152 mm

Balancing Weight for DEOS 70x198mm

Balancing Weight for DEOS 81x133mm

Base Plate with Air Flow Cover

Bearing Dual Seal Kit 125/150mm

Bearing Housing for DEOS

Bearing Kit for DEOS

Brake Seal for 325/350

Brake Seal MPP0321 125/150mm for DEROS/PROS

Brush for Dust Suction Hood 9190152001

Buzzer for DE 1230 M

Cap for Pot-Meter for DE 1230

Carry Bag for Mirka LEROS

A practical, protective bag with carrying strap for the Mirka® LEROS wall sander. Frees your hands for carrying other accessories, such as the dust extractor. The bag protects the sander during transport and it includes storage space for abrasives and backing pads.

Connector for Air+Electric Hoses with threads

Connector for air and electric hoses with threads. This adapter is close to the dust extractor, where the pneumatic tube/electrical cable comes out. Electrical conductive (≤ 10⁶ Ω/square). The adapter comes with the following hoses: MIE6514511, MIE6514711, 8992514511, 8992514711 and 8992515011.

Contact Spring with Wire for DE 1230

Container for DE 1230

Container Sealing for DE 1230

Control Panel for DE 1230 L AFC

Control Panel for DE 1230 L PC

Control Panel for DE 1230 M AFC

Cord Strap for DE 1230

Cover Plate for DEROS/DEOS

Drive Shaft Compl No 55 + Pinion No 53 for PS 1437

Dust Suction Hood for PS 1437 Polisher

An easy keyless attachment of hood to Mirka PS 1437 polisher suitable for demanding aggressive sanding applications and used together with Abranet HD, it supports the dust-free solution. The front segment can be removed for a better visibility and to reach edges, the springs gives also a smoother operation. The brushes ensure a good suction and protects the surface.

Electronic Board 230-240V for DE 1230 L PC

End Cap for LEROS

Fan 2,5mm/130g Pad for DEROS 150mm

Fan 5,0mm/100g Pad for DEROS 125mm

Fan 5,0mm/130g Pad for DEROS 150mm

Fan 8,0mm/130g Pad for DEROS 150mm

Fan for DEOS

Filter for DE 415/915/1025 L

Dust Extractor filter for Mirka DE 415/915/1025 L.

Flap-lever kit for DE 1230 PC

Floater with Magnet for DE 1230

Foam Sealing 298x148 for DE 1230

Ground Wire

Hatchback Lower Cover for DE 1230

Hepa Filter Cover for DE 1230/1242

The HEPA Filter Cover for DE 1230/1242 is necessary to keep the HEPA filter (Mirkacode 8999100711) in place.

Hepa Filter for DE 1230/1242

The HEPA (High Efficiency Particulate Air) filter can be installed in addition to the standard filter to improve the filtration. By adding this filter you will get a triple filtration: 1. Fleece dust bag 2. Standard main filter 3. HEPA filter. Please note that adding this filter will not make a dust extractor DE 1230/42 an H-class extractor, even though the filter itself fulfills HEPA class H13 requirements. When installing a HEPA-filter for the first time, the HEPA Filter Cover for DE 1230/1242 (Mirkacode 8999100811) is necessary.

Hole Screw Kit for LEROS, 8/Pack

Hose 1,8m MPP9023 for PROS DB

1,8m long dust suction hose and pneumatic cable. Suitable for Mirka PROS 550DB and 650DB. (Mirka code: 8995550211 and 8995650211)

Hose 28mmx1,8m MPA0412

1,8m long dust suction hose and pneumatic cable. Suitable for 28 mm swivel exhaust for Mirka® pneumatic sanders.

Hose 4m for Miro 955/955-S

Dust extraction hose for Mirka® Miro 955 and 955-S. Antistatic (≤ 10¹¹ Ω/square)

Hose Adapter 32/54mm

Hose adapter Ø 32/54 mm for Mirka dust extractors. The adapter connects the hose into the dust extractor. Electrical conductive (≤ 10⁶ Ω/square). Delivered together with the following hoses: MIE6514511 / MIE6514511US, MIE6514711 / MIE6514711US,MIN6519411, MIN6519711, 8992514511, 8992514711 and 8992515011.

Hose Protection Device for Miro 955/955-S

Housing for DEOS 353/383

Housing for DEROS 550,625,650,680

Interface 225mm 25H for Mirka LEROS, 1/Pack

3 mm thick soft interface for Mirka® LEROS backing pads. The interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 225mm 8+1H 17mm Medium, 1/Pack

A medium hard,17 mm thick interface suitable for Miro 955/955S dry wall sanders. This interface is only to be used with Mirka's Net discs or Gold 16 holes discs. The interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 225mm 8+1H 22mm Medium, 1/Pack

A medium hard, 22 mm thick interface suitable for Miro 955/955S dry wall sanders. This interface is only to be used with Mirka's Net discs or Gold 16 holes discs. The interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Label kit AFC Control Panel & Dust Class, 5/Pack

Label kit PC Control Panel & Dust Class, 4/Pack

LED Indicator kit for DE 1230 M

Lever 2,5mm for DEROS

Lever 3,0mm for DEOS

Lever 5,0mm for DEROS

Lever 8,0mm for DEROS

Mirka Case 400x300x158mm Yellow

Splash and dust resistant case: a sturdy storage solution that is easy to pack and move to the next work site. The case protects the tool and prolongs its lifetime. The connectable case system keeps tools and equipment organized and in one place. Hight 158mm.

Mirka Connector for Air+Electric Hoses

Connector for air + electric hoses. Electrical conductive (≤ 10⁶ Ω/square). Comes with the following hoses: MIE6514511, MIE6514711, 8992514511, 8992514711 and 8992515011.

Mirka Intelligent Battery BPA 10850 10.8V 5.0Ah

The Mirka® intelligent Li-ion battery allows a precise capacity measurement based on a coulomb counter. With Bluetooth and the myMirka® Dashboard, you can easily monitor battery health status and available capacity. It is also possible to monitor individual cell voltage and together with the coulomb counter both battery lifetime and usage time can be prolonged. The firmware in the battery is upgradeable via Bluetooth connection of the sander/polisher. The 10.8V 2.5Ah battery has 6 cells and charging time is approximately 1h 30min.

Mirka LEROS screw pad conversion kit

Motor 2,5/130g Pad DEROS X 110V

Motor 2,5mm/130g Pad for DEROS 150mm 230V

Motor 2,5mm/30g Pad for DEROS 325 230V

Motor 5,0/100g Pad DEROS X 110V

Motor 5,0/130g Pad DEROS X 110V

Motor 5,0mm/100g Pad for DEROS 125mm 230V

Motor 5,0mm/130g Pad for DEROS 150mm 230V

Motor 5,0mm/30g Pad for DEROS 350 230V

Motor 5,0mm/30g Pad for DEROS 350X 110V

Motor 8,0mm/130g Pad for DEROS 150mm 230V

Motor Assembly 110V for DEOS

Motor Assembly 230V for DEOS

Motor Assembly for DE 1230/1242 230V

Motor Assembly for LEROS X

Pad Backing MPB0101 for OS 343

Pad Screw Kit for DEOS

Pad Wrench 13mm MPA3226 for RPS

Suitable for Mirka® RPS 300CV.

Pad Wrench 17mm for 77mm machines

Pad Wrench 24mm for 125/150mm Machines

Suitable for 125 / 150 mm electric and pneumatic sanders as well two-handed pneumatic sanders and polishers.

PC Button for DE 1230 PC

PCB Spacer Kit

Power Cord 2,0m for Battery Charger BCA 108 UK

Power Cord 2.0m for Battery Charger BCA 108 EU

Pushlock Washer 10mm for DEOS

Quick Lock Kit AP147

Quick Lock kit for Mirka® AP 300NV. Enables the use of Quick Lock backing pads.

Rear Wheel D175

Rewireable Connector HP-9R

Rewireable connector. This connector fits all versions of cables for Mirka® DEROS, Mirka® DEOS and Mirka® LEROS, regardless of different country versions (NOTE! Exception US 110V) In case the connector is detached from the cable, it is possible to open it and rewire. Please note that rewiring requires a certain electrical knowledge. Also please check local requirements before performing the rewiring.

Rewireable Mains Cable 10,5m CE 230V EU

Rewireable mains cable suitable for Mirka® DEROS, Mirka® DEOS and Mirka® LEROS. This cable is rewireable in the sense that in case the connector is detached from the cable, it is possible to open the connector and rewire. Please note that rewiring requires a certain electrical knowledge. Also please check local requirements before performing the rewiring.

Rewireable Mains Cable 4,3m CE 230V EU

Rewireable mains cable suitable for Mirka® DEROS, Mirka® DEOS and Mirka® LEROS. This cable is rewireable in the sense that in case the connector is detached from the cable, it is possible to open the connector and rewire. Please note that rewiring requires a certain electrical knowledge. Also please check local requirements before performing the rewiring.

Rotary Switch 16A for DE 1230 PC

Sanding Plate Base 225mm Grip 16H for MIRO

Sanding plate base 225 mm for MIRO 955/955S dry wall sanders.

Screw 5x35mm for DE 1230/1242

Screw Kit for DEROS/DEOS

Seal for DEOS 353/383

Seal for DEOS 663

Shaft Balancer Kit MPA3337 for ROS2 5,0/150mm

Sound Absorber 83 x 55 x 35mm

Spacer for DEOS, 20/Pack

Speed Controller DEROS/DEOS X 110V

Speed Controller for DEROS/DEOS 230V

Spindle + Bearing Assembly for LEROS

Spindle MPP0320 for DEROS/PROS

Spring for Button for DE 1230 PC

Start Button Kit for DEROS/DEOS

Swivel Exhaust for DEROS Black, 180º

Swivel Exhaust Kit for DEOS 353/383

Swivel Exhaust Kit for DEOS 663

Swivel Exhaust Kit for DEROS 125/150mm

Mirka® DEROS electric sander accessory.

Swivel Exhaust Kit for DEROS 325/350

Top Cover for DE 1230/1242

Tube for LEROS 950

Type Label Kit for DEOS 353,383 220-240V

Type Label Kit for DEROS 325/350 220-240V

Type Label Kit for DEROS 550,625,680 220-240V

Type Label Kit for DEROS 625,650 220-240V CN

Type Label Kit for DEROS X 100-120V US

Vacuum Adapter 36/29mm MPB0065 for ROS/CEROS

Wheel 100mm with Break for DE 1242, 2/Pack

Wheel Cap for DE 1230

Wire/Capacitor Kit