Backing Pads for Sanders

The Mirka backing pads for sanding machines are designed to meet the challenges set when performing demanding sanding operations. Mirka has developed backing pads for both sanding with traditional abrasives and for sanding dust-free with Mirka's Net Sanding dust extraction system. In order to achieve the best performance and a good sanding result, it is important to combine the right sander with the right accessories. Browse our backing pads and find the backing pads suitable for your sanders.

Backing Pad 125mm 5/16" Grip 5H Medium

Backing pad medium for grip discs.

Backing Pad 125mm 5/16" Grip Medium

Backing pad grip medium no hole for grip discs.
Backing Pad 125mm Grip 8H Rounded

Backing Pad 125mm Grip 8H Rounded

Backing Pad 125mm Grip S6

Backing Pad 125mm Grip S6

Backing Pad 150mm 5/16" Grip 15H Medium

Backing pad medium for grip discs. This backing pad fits Mirka’s 6 H, 6 + 1 H, 8 + 1 H and 15 H discs.

Backing Pad 150mm 5/16" Grip 48H/17H Medium

Backing Pad 150mm 5/16" Grip 6H Medium

Backing pad medium for grip discs.

Backing Pad 150mm 5/16" Grip 6H Soft

Soft Backing pad for grip discs.

Backing Pad 150mm 5/16" Grip Medium

Non hole backing pad medium for grip discs.

Backing Pad 150mm 5/16" PSA 6H Medium

Backing pad medium for PSA discs.

Backing Pad 150mm 5/16" PSA Medium

Backing pad medium no hole for PSA discs.
Backing Pad 225mm 25H for Mirka LEROS + 8 Screws

Backing Pad 225mm 25H for Mirka LEROS + 8 Screws

Backing pad 225mm designed for Mirka® LEROS 950CV. This plain, hard backing pad has to be used together with an interface (MIW9534611). The interface is attached to the backing pad with screws (included). Optimised to be used together with Abranet net sanding abrasive for a smooth surface finish.
Backing Pad 225mm 25H Grip for Mirka LEROS

Backing Pad 225mm 25H Grip for Mirka LEROS

225 mm backing pad designed for Mirka® LEROS 950CV. This hard backing pad is recommended to be used together with an interface (MIW9534611). Optimised to be used together with Abranet net sanding abrasive for a smooth surface finish.
Backing Pad 32mm PSA Soft, 5/Pack

Backing Pad 32mm PSA Soft, 5/Pack

Female no hole PSA soft backing pad with an even surface.
Backing Pad 34mm Grip Medium, 10/Pack

Backing Pad 34mm Grip Medium, 10/Pack

Backing Pad 70x198mm Grip 56H Medium

Backing Pad 70x198mm Grip 56H Medium

Velcro backing pad for orbital sanders. Delivered with one pad protector and user instructions.
Backing Pad 75x100mm Grip 33H Medium

Backing Pad 75x100mm Grip 33H Medium

Grip backing pad for pneumatic orbital sanders. Delivered with one pad protector and user instructions.

Backing Pad 77mm 1/4" Grip 6H Medium

Backing pad medium for grip disc, delivered with one pad protection disc including user instructions.

Backing Pad 77mm 1/4" Grip Medium

Backing pad medium for grip discs.

Backing Pad 77mm 5/16" Grip Medium

Suitable only for the pneumatic sander Mirka OS 310.
Backing Pad 81x133mm Grip 54H Medium

Backing Pad 81x133mm Grip 54H Medium

Grip backing pad for pneumatic orbital sanders. Delivered with one pad protector and user instructions.
Backing Pad 81x165mm for DEOS 353 50H Medium

Backing Pad 81x165mm for DEOS 353 50H Medium

An extension backing pad for the Mirka® DEOS 353 which enables reaching further into narrow places, one specific focus application is sanding of window shutters. In order to attach the extension pad, you simply remove the standard backing pad and attach the extension backing pad. When sanding with the extension you only use part of the pad, and therefore the standard 81x133mm abrasives are intended to be used. In addition, there is also a pad saver for the extension backing pad (8299532111).
Backing Pad Net 100x152x152mm Grip 32H Medium

Backing Pad Net 100x152x152mm Grip 32H Medium

Backing pad suitable for the Mirka® DEOS Delta sander.

Backing Pad Net 125mm 5/16" Grip 28H 130g Medium

Fits all Mirka 150 mm (6”) sanders. This 130g backing pad gives you the ability to switch sizes and use 125 mm (5”) sanding discs.

Backing Pad Net 125mm 5/16" Grip 28H Hard

This is a new product. A 125 mm backing pad recommended for heavier sanding applications where higher stock removal is needed.

Backing Pad Net 125mm 5/16" Grip 28H Medium

This backing pad is suitable for our multihole configuration 125 mm (5”) 17H, available in the Gold product range. This backing pad can also can be used on Festo (8+1H), Bosch (8H) and Black & Decker machines.

Backing Pad Net 125mm 5/16" Grip 28H Soft

A soft 125 mmm backing pad, especially suited for profile sanding and where a soft edge is needed.

Backing Pad Net 125mm 5/16" Grip 44H Medium

Backing pad medium for Abranet discs. Delivered with a pad protector and user instructions.

Backing Pad Net 150mm 5/16" Grip 48H Hard

This 150 mm backing pad is recommended for heavier sanding applications where higher stock removal is needed.

Backing Pad Net 150mm 5/16" Grip 48H Medium

A 150 mm (6”) backing pad with a central air inlet. The air channels leading to the center of the backing pad has an increased air flow and therefore the dust is removed efficiently.

Backing Pad Net 150mm 5/16" Grip 48H Soft

A soft 150 mmm backing pad, especially suited for profile sanding and where a soft edge is needed.

Backing Pad Net 150mm 5/16" Grip 51H Med

Backing pad medium for net discs. Delivered with a pad saver and user instructions.
Backing Pad Net 200mm Grip 89H Medium

Backing Pad Net 200mm Grip 89H Medium

This 200 mm (8 in.) Net Backing Pad with 89 holes is unique and designed only for MIRKA ROS2-850CV two-handed randon orbital sander.
Backing Pad Net 70x198mm Grip 48H Medium

Backing Pad Net 70x198mm Grip 48H Medium

Grip backing pad for electric orbital sanders.
Backing Pad Net 81x133mm Grip 46H Medium

Backing Pad Net 81x133mm Grip 46H Medium

Grip backing pad for electric orbital sander.
Backing Pad Quick Lock 20mm PSA Hard, 10/Pack

Backing Pad Quick Lock 20mm PSA Hard, 10/Pack

Quick Lock pad 20mm PSA hard suitable for Mirka ROS 150NV, Mirka AOS 130NV, Mirka AOS-B 130NV and Mirka AROS-B 150NV sanders.
Backing Pad Quick Lock 32mm Grip Hard, 5/Pack

Backing Pad Quick Lock 32mm Grip Hard, 5/Pack

Backing Pad Quick Lock 32mm Grip Soft, 10/Pack

Backing Pad Quick Lock 32mm Grip Soft, 10/Pack

Quick Lock pad 32mm Grip soft suitable for Mirka ROS 150NV sander.
Backing Pad Quick Lock 32mm PSA Hard, 10/Pack

Backing Pad Quick Lock 32mm PSA Hard, 10/Pack

Quick Lock pad 32mm PSA hard suitable for Mirka ROS 150NV sander.
Backing Pad Quick Lock 32mm PSA Soft Edge, 5/Pack

Backing Pad Quick Lock 32mm PSA Soft Edge, 5/Pack

Quick Lock pad 32mm PSA Soft Edge suitable for Mirka ROS 150NV, Mirka AOS 130NV, Mirka AOS-B 130NV and Mirka AROS-B 150NV sanders.
Backing Pad Quick Lock 32mm PSA Soft, 10/Pack

Backing Pad Quick Lock 32mm PSA Soft, 10/Pack

Quick Lock pad 32mm PSA soft suitable for Mirka ROS 150NV sander.

Backing Pad UNI 150mm 5/16"+ M8 Grip 57H Medium

Uni-Backing Pad for grip discs. Delivered with one Pad Protector and user instructions. This pad is suitable for Festool Multi-Jetstream system.

Backing Pad UNI 150mm 5/16"+ M8 Grip 61H Hard

Abranet hard density Unipad 150 mm (6") for all hole combinations. This Abranet unipad is optimized for flat surfaces and has a high edge durability. 15 larger holes allow use of conventional discs with 6 h, 6 + 1 h, 9 h and 15 h. Suitable for narrow shroud machines but not recommended to be used with 150 mm ROS machines, because the combination of Unipad + wide/Abranet shroud machines does not give the optimal dust extraction. Delivered with one 150 mm (6") pad saver. To ensure correct installation, always use the supplied spacing washers, making sure that a minimum gap exists between the sander’s shroud and the top part of the backing pad, to prevent friction between the two parts. Tighten the screw hard. The backing pad should never turn idle. From time to time, check that the screw is well tight.

Backing Pad UNI 150mm 5/16"+ M8 Grip 61H Medium

Abranet medium density Unipad 150 mm (6") for all hole combinations. This Abranet unipad is optimized for flat surfaces and has a high edge durability. 15 larger holes allow use of conventional discs with 6 h, 6 + 1 h, 9 h and 15 h. Suitable for narrow shroud machines but not recommended to be used with 150 mm ROS machines, because the combination of Unipad + wide/Abranet shroud machines does not give the optimal dust extraction. Delivered with one 150 mm (6") pad saver. To ensure correct installation, always use the supplied spacing washers, making sure that a minimum gap exists between the sander’s shroud and the top part of the backing pad, to prevent friction between the two parts. Tighten the screw hard. The backing pad should never turn idle. From time to time, check that the screw is well tight.
Sanding Plate Base 225mm Grip 16H

Sanding Plate Base 225mm Grip 16H

Sanding plate base 225 mm for MIRO 955/955S dry wall sanders.