ABRANET MAX

ABRANET MAX

Abranet Max is a universal product suited for a broad variety of sanding applications and is especially developed for the wood industry. Due to the net structure it does not easily clog up on resinous wood types or soft materials and the sanded surface stays cooler and avoids burning. The tough aluminium oxide grain gives a high cut rate on harder wood types and materials. The symmetric net structure enables an efficient cut and stock removal. Lower pressure is needed and a more consistent surface finish means minimal quality variations in the process when sanding with Abranet Max. The product offers an extreme long lifetime compared to conventional abrasive belts, which results in a lower amount of belts needed for the job and also cost savings and time efficiency because of less downtime in production due to changing of belts. The product is also well suited for applications where water is used as cooling agent.
AVOMAX ANTISTATIC

AVOMAX ANTISTATIC

An all-round product for various wood sanding applications. The open coating makes Avomax® Antistatic especially efficient for sanding materials that clog easily. Works well for sanding soft materials and resinous wood types such as pine wood. The strong antistatic paper provides dimensionally accurate and reliable wide belts. Full resin bonding and aluminium oxide grain guarantee a very durable product.
FILE BELT CER YPC2A1

FILE BELT CER YPC2A1

Mirka® File belt CER is ideal for tough sanding applications together with the Mirka® PBS belt sander. Especially suited for Automotive refinishing and Metal processing. The Ceramic grains provides a high removal rate at low and medium pressure. Long life time and good surface finish.
FILE BELT ZIR YPZ1A1

FILE BELT ZIR YPZ1A1

Mirka® File belt ZIR are ideal for stainless metal sanding applications for automotive refinishing and metal processing together with the Mirka® PBS belt sander. The Zirconia grains provides a high removal rate, a good surface finish and the abrasive has a long life time.
GOLD MAX

GOLD MAX

Gold Max is a stearate coated paper abrasive for intermediate and fine sanding applications. The antistatic E-paper gives good strength and stability to the product. The heat treated aluminium oxide enables a high cut rate even on harder paints. The semi-open special coating minimises clogging and increases the sanding lifetime. The backing ensures a good stability and offers a smooth surface finish. Gold Max is suitable for paint and lacquer sanding.
HIOLIT JF

HIOLIT JF

Hiolit JF is targeted towards wood and metal sanding applications. The flexible cloth backing makes it optimal for profile sanding, seams, edges and other applications where a flexible abrasive with high edge wear is needed. The semi-open coating makes Hiolit JF a universal abrasive, especially well suited for soft and clogging materials.
HIOLIT XO

HIOLIT XO

Hiolit XO is a semi-open stiff universal abrasive for belt sanding and other machine sanding where it has excellent edge wear resistance and durability. In particular, it produces high quality results on challenging materials – for example, grits 36–80 are suitable for aggressive sanding, such as severe rust damage, as well as other sanding operations where large amounts of material need to be removed.
JEPUFLEX ANTISTATIC

JEPUFLEX ANTISTATIC

A high class abrasive with a wide application area. The focus of the optimization work has been the sanding of hard wood such as beech, birch and oak. The strong antistatic paper provides dimensionally accurate and reliable wide belts. Full resin bonding and aluminium oxide grain guarantee a very durable product. Silicon carbide grain used in the coarsest grit gives extra strength to the product. These qualities together with a well adjusted coating density make Jepuflex Antistatic a genuine all-round product that works well also on metal, plastic and lacquer.
MICROSTAR

MICROSTAR

This new abrasive film product, Microstar, is designed for mattening and paint rectification of top- and clear coat applications. Microstar has a special stearate layer and a smooth film backing. This product has a high quality finish and lasts longer as it doesn’t clog as easily as traditional products. Microstar produces a fine scratch pattern that is easy to polish out. For a perfect result, it is recommended to use Microstar with a 5 mm interface pad. Microstar is developed for dry sanding only.
MIRKON

MIRKON

A tough and durable sanding material, Mirkon is perfectly suited to the aggressive machine sanding of metal. Thanks to its polyester based cloth material it's highly durable and can take plenty of tough treatment. It's also very aggressive for calibration sanding.
SICA  CLOSED

SICA CLOSED

Designed for belt sanding and sanding of MDF and other materials containing mineral debris, Sica Closed is a fully anti-static product that's suitable for materials covered with water-based surface treatment coatings. It maintains its shape well and the silicon carbide grains produce less fibre rising and a finer scratch pattern than products using aluminium oxide grains. The result is a smoother sanded surface and a better final finish after surface treatment.
SICA  FINE STEARATE

SICA FINE STEARATE

Sica Fine Stearate is a fully anti-static, 'stearate' product which produces minimal dust load and a high-quality surface finish. For example, you can expect a perfect result after surface treatment with a top lacquer - it even minimises lacquer using. Also available as Sica Fine without stearate.
SICA OPEN

SICA OPEN

Sica Open is the recommended solution for sanding soft, resin-rich wood types. The open coating and completely anti-static backing material and layers limit dust loading and prevent clogging which improves product lifespan. In addition, silicon carbide grains produce a smoother scratch pattern and a higher surface gloss level than aluminium-oxide based sanding materials.
ULTIMAX

ULTIMAX

Manufactured using a unique production process called ‘Selective Coating® Technology’ Ultimax features a series of tiny cavities designed into the abrasive material which work to efficiently prevent clogging. This innovative technology, along with special abrasive grains, produces aggressive performance and excellent edge wear resistance while keeping the sanding surface cool. Together these features ensure a longer lifespan and reduced material usage per job.
UNIMAX

UNIMAX

An all-round wood sanding product, Unimax maintains its shape and is completely anti-static. This reduces the belt dust load and minimises clogging which helps the machine stay cleaner and improves work safety while increasing belt lifespan.