Adapter DS Twisted Wool Pad M14/W5"/8"

Adapter for Hand Sanding Blocks 20/28mm

A 20/28 mm soft adapter, enabling the use of Ø 27mm dust extraction hoses with the hand sanding blocks. Thanks to the softness, the adapter is easy to attach to the hand sanding block. Electrical conductive (≤ 10⁶ Ω/square).

Adapter UNF 5/16 - M8

Adapter UNF 5/16 - UNC 1/4

Backing Pad 115mm Fibre Disc M14

Backing Pad 115 mm (4.5") for fibre discs.

Backing Pad 125mm 5/16" Grip 5H Medium

Backing pad medium for grip discs.

Backing Pad 125mm Fibre Disc M14

Backing Pad 125 mm (5") for fibre discs.

Backing Pad 125mm M14 Grip Hard for Polisher

Hard backing pad 5" 125 mm M14

Backing Pad 125mm M14 Grip Soft for Polisher

Soft backing pad 5" 125 mm M14

Backing Pad 135mm M14 Grip Soft Edge for Polisher

Backing pad 135 mm M14 soft.Used together with 150 mm polishing pads.

Backing Pad 150mm 5/16" Grip 15H Medium

Backing pad medium for grip discs. This backing pad fits Mirka’s 6 H, 6 + 1 H, 8 + 1 H and 15 H discs.

Backing Pad 150mm 5/16" Grip 6H Medium

Backing pad medium for grip discs.

Backing Pad 150mm 5/16" Grip 6H Soft

Soft Backing pad for grip discs.

Backing Pad 150mm 5/16" Grip Medium

Backing pad for grip discs. No holes and medium hard.

Backing Pad 150mm 5/16" PSA 6H Medium

Backing pad medium for PSA discs.

Backing Pad 150mm 5/16" PSA 6H Soft

Backing Pad 150mm 5/16" PSA Medium

Backing pad medium no hole for PSA discs.

Backing Pad 165mm M14 Grip Soft Edge for Polisher

Backing pad 165 mm M14 soft. Used together with 180 mm polishing pads.

Backing Pad 175mm M14, Twisted Wool for Polisher

Backing pad 7" 175 mm M14

Backing Pad 225mm 25H Grip for Mirka LEROS

Backing Pad 225mm 25H Grip LEROS + 8 screws

Backing pad 225mm designed for Mirka® LEROS 950CV. This backing pad is endowed with both grips and screws, for maximal attachment of the interface. Recommended to be used together with an interface (MIW9534611) and best combined with Abranet net sanding abrasive for a smooth and fast surface finish.

Backing Pad 225mm 25H Plain for LEROS + 8 Screws

Backing Pad 32mm PSA Soft, 5/Pack

Backing Pad 34mm Grip Medium, 10/Pack

Quick Lock pad 34mm Grip medium. Suitable for Mirka® AOS 130NV sander.

Backing Pad 70x198mm Grip 56H Medium

Backing Pad 75x100mm Grip 33H Medium

Backing Pad 77mm 1/4" Grip 6H Medium

Backing Pad 77mm 1/4" Grip Medium

Backing Pad 77mm 5/16" Grip Medium

Suitable only for the pneumatic sander Mirka® OS 310.

Backing Pad 77mm M14 Grip Hard for Polisher

Hard backing pad 3" 77 mm M14

Backing Pad 77mm M14 Grip Soft for Polisher

Soft backing pad 3" 77 mm M14

Backing Pad 81x133mm Grip 54H Medium

Backing Pad 81x165mm for DEOS 353 50H Medium

An extension backing pad for the Mirka® DEOS 353 which enables reaching further into narrow places, one specific focus application is sanding of window shutters. In order to attach the extension pad, you simply remove the standard backing pad and attach the extension backing pad. When sanding with the extension you only use part of the pad, and therefore the standard 81x133mm abrasives are intended to be used. In addition, there is also a pad saver for the extension backing pad (8299532111).

Backing Pad Net 100x152x152mm Grip 32H Medium

Backing pad suitable for the Mirka® DEOS Delta sander.

Backing Pad Net 125mm 5/16" Grip 28H 130g Medium

Backing Pad Net 125mm 5/16" Grip 28H Hard

A 125 mm backing pad recommended for heavier sanding applications where higher stock removal is needed.

Backing Pad Net 125mm 5/16" Grip 28H Medium

Backing Pad Net 125mm 5/16" Grip 28H Soft

A soft 125 mmm backing pad, especially suited for profile sanding and where a soft edge is needed.

Backing Pad Net 125mm 5/16" Grip 44H Medium

Backing pad medium for Abranet discs. Delivered with a pad protector and user instructions.

Backing Pad Net 150mm 5/16" Grip 48H Hard

This 150 mm backing pad is recommended for heavier sanding applications where higher stock removal is needed.

Backing Pad Net 150mm 5/16" Grip 48H Medium

Backing Pad Net 150mm 5/16" Grip 48H Soft

A soft 150 mmm backing pad, especially suited for profile sanding and where a soft edge is needed.

Backing Pad Net 150mm 5/16" Grip 51H Med

Backing pad medium for net discs. Delivered with a pad saver and user instructions.

Backing Pad Net 200mm Grip 89H Medium for ROS2 850

This 200 mm (8 in.) Net Backing Pad with 89 holes is unique and designed only for MIRKA ROS2-850CV two-handed randon orbital sander.

Backing Pad Net 70x198mm Grip 48H Medium

Backing Pad Net 81x133mm Grip 46H Medium

Backing Pad Quick Lock 20mm PSA Hard, 10/Pack

Quick Lock pad 20mm PSA hard. Suitable for Mirka® ROS 150NV, Mirka® AOS 130NV, Mirka® AOS-B 130NV and Mirka® AROS-B 150NV sanders.

Backing Pad Quick Lock 32mm Grip Hard, 5/Pack

Quick Lock pad 32mm grip hard. Suitable for Mirka® ROS 150NV, Mirka® AOS 130NV, Mirka® AOS-B 130NV and Mirka® AROS-B 150NV sanders

Backing Pad Quick Lock 32mm Grip Soft, 10/Pack

Backing Pad Quick Lock 32mm PSA Soft CPD 10/Pack

Backing Pad Quick Lock 32mm PSA Soft Edge, 5/Pack

Quick Lock pad 32mm PSA Soft Edge. Suitable for Mirka® ROS 150NV, Mirka® AOS 130NV, Mirka® AOS-B 130NV and Mirka® AROS-B 150NV sanders

Backing Pad Quick Lock 32mm PSA Soft, 10/Pack

Backing Pad UNI 150mm 5/16"+ M8 Grip 57H Medium

Uni-Backing Pad for grip discs. Delivered with one Pad Protector and user instructions. This pad is suitable for Festool Multi-Jetstream system.

Backing Pad UNI 150mm 5/16"+ M8 Grip 61H Hard

Abranet hard density Unipad 150 mm (6") for all hole combinations. This Abranet unipad is optimized for flat surfaces and has a high edge durability. 15 larger holes allow use of conventional discs with 6 h, 6 + 1 h, 9 h and 15 h. Suitable for narrow shroud machines but not recommended to be used with 150 mm ROS machines, because the combination of Unipad + wide/Abranet shroud machines does not give the optimal dust extraction. Delivered with one 150 mm (6") pad saver. To ensure correct installation, always use the supplied spacing washers, making sure that a minimum gap exists between the sander’s shroud and the top part of the backing pad, to prevent friction between the two parts. Tighten the screw hard. The backing pad should never turn idle. From time to time, check that the screw is well tight.

Backing Pad UNI 150mm 5/16"+ M8 Grip 61H Medium

Abranet medium density Unipad 150 mm (6") for all hole combinations. This Abranet unipad is optimized for flat surfaces and has a high edge durability. 15 larger holes allow use of conventional discs with 6 h, 6 + 1 h, 9 h and 15 h. Suitable for narrow shroud machines but not recommended to be used with 150 mm ROS machines, because the combination of Unipad + wide/Abranet shroud machines does not give the optimal dust extraction. Delivered with one 150 mm (6") pad saver. To ensure correct installation, always use the supplied spacing washers, making sure that a minimum gap exists between the sander’s shroud and the top part of the backing pad, to prevent friction between the two parts. Tighten the screw hard. The backing pad should never turn idle. From time to time, check that the screw is well tight.

Backing plate for DEOS 100x152x152mm

Backing plate for DEOS 81x133mm

Backing plate for Mirka DEOS 70x198mm

Backing Plate Screw Kit

Balancing Housing Screw Kit

Balancing Screw Kit for DEROS/PROS

Balancing Weight for DEOS 70x198mm

Balancing Weight for DEOS 81x133mm

Bearing Dual Seal Kit 125/150mm

Bearing Housing for DEOS

Bearing Kit for DEOS

Bearing Press Sleeve Tool T-13

Bearing Separator

Boot Clamp A for AOS 130NV

Boot Clamp B for AOS 130NV

Boot Clamp C for AOS 130NV

Bracket Kit for CEROS Power

Brackets kit for Mirka® CEROS power for Mirka Dust Extractors 412/415 or 912/915.

Brake Seal for LEROS

Brake Seal MPP0321 125/150mm for DEROS/PROS

Brush for Dust Suction Hood 9190152001

Button Plate

Cable Kit CE 230V 6m for DEROS

Carry Bag for Mirka Hose

This Carry Bag fits all Mirka hoses and also the box that the hoses are delivered in. This Carry Bag can also be used to transport other surface finishing equipment. The size of the Carry Bag is (L x W x H): 55 cm x 25 cm x 47 cm.

Carry Bag for Mirka LEROS

A practical, protective bag with carrying strap for the Mirka® LEROS wall sander. Frees your hands for carrying other accessories, such as the dust extractor. The bag protects the sander during transport and it includes storage space for abrasives and backing pads.

Case Inlay for 150mm discs

Case Inlay for 150mm discs. Suitable for Mirka Case 400x300x210mm (MIN6533011) L:38,1cm, W:26,5cm, D:8cm.

Case Inlay for CEROS

Case Inlay for DEROS/DEOS/DEOS Delta incl lid pad

Castor Wheel 125mm Brake Dust Extractor Trolley

Cleaning Cloth Micro Fiber 330x330mm Yellow,2/Pack

A yellow soft micro fiber cloth, with a fine structure. Absorbs residue well and is washable. Packed 2 pcs/bag.

Cleaning Cloth Micro Fiber 400x400 mm Grey, 2/Pack

This grey colored cleaning cloth is gentle to the surface and leaves less scratch marks. It has a very good absorption capability and glides smoothly on the surface with very low friction.

Cleaning Tool for Lambswool Pad

The pad cleaning tool is a hand-held cleaning tool for wool and foam pads. Use the wheels to clean the pads by rolling the tool over the spinning pad. Use the abrasive plates on the side to level and reshape foam pads.

Clean-Up Kit for Dust Extractors

A clean-up kit with a brush nozzle for dust extractors. The brush nozzle makes the kit more versatile. The hose is 4 m (Ø 32mm) and the length for the stainless steel tubes is 500 mm x 2.

Clean-Up Kit without Hose

A Clean-Up Kit for Dust extractors. Hose and connector are not included in this kit. Suitable hose with a connector included would be MIN6519411 (4m) or MIN6519211 (10m).

Connector Air Inlet for Hand Sanding Block 20/20mm

When fixed on a Mirka 20 mm dust extraction hose, this connector enables a quick and smooth change of the hose from one Mirka hand sanding block to another.

Connector for Air+Electric Hoses with threads

Connector for air and electric hoses with threads. This adapter is close to the dust extractor, where the pneumatic tube/electrical cable comes out. Electrical conductive (≤ 10⁶ Ω/square). The adapter comes with the following hoses: MIE6514511, MIE6514711, 8992514511, 8992514711 and 8992515011.

Cover Cap Kit

Cover Plate for CEROS

Cover Plate for DEROS/DEOS

Coverall Mirka Black L

Coverall Mirka Black M

Coverall Mirka Black S

Coverall Mirka Black XL

Coverall Mirka Black XXL

CSD Disc 100x13mm Red

Clean and strip-disc with backing plate for angle grinder. RPM max 8 000. Clean and strip discs are used for removing paint and rust, as well as for cleaning oxide and spray from welded joints on stainless and acid proof material. Effective cutting without scratches.

CV-Hose Connector for Solution Trolley

DC Cable Female Plug for CEROS

DC Cable Kit 4m for CEROS

DC Extension Cord 10m 22V for CEROS

Mirka CEROS electric sander accessory.

Dispenser for Rolls 115mmx5m

A dispenser for abrasive rolls, holds appr. 10-12 rolls per grit.

Display Carton Board Black 3 Compartments

This cardboard display package includes 8 white plastic hooks, a Mirka logo sign and a Mirka Handy sign. The dimensions of a complete display without top sign is 140 cm high, 54 cm wide and 64 cm deep. The top box can also be used as a countertop display. The dimensions of the countertop display is 36,5 cm high, 54 cm wide and 26 cm deep.

Dry Guide Coat Black 100g

Black Dry Guide Coat used for light colour surfaces. Dry Guide Coat with excellent covering properties. The powder makes all imperfections and scratches visible. This unique applicator leaves an even powder coating. The applicator has flexible edges which makes it easy to use on contoured areas. A great tool in guiding the operator through the sanding process and achieving a perfect result

Dry Guide Coat White 100g

The Dry Guide Coat has excellent covering properties. The powder makes all imperfections and scratches visible. This unique applicator leaves an even powder coating. The applicator has flexible edges which makes it easy to use on contoured areas. This is a great tool in guiding the operator through the sanding process and achieving a perfect result. The white powder is used for dark colour surfaces.

Dust Hose Kit

Dust Mask FFP-2, 20/Unit

Multi layered filter medium combining electrostatic charge.Ergonomically shaped for comfort and ease of use. Adjustable head straps to provide individual fit. Adjustable nose clip to ensure good seal around nose. Colour coded for ease of identification. Individually packed complete with instructions for use. Conforms to the H.S.E approved standard EN149 2001. Non-allergenic.

Dust Mask FFP-2V, 10/Unit

Dust Shield rev B for DEOS, 10/Pack

Dust Suction Hood for PS 1437 Polisher

Extension Connector NPT 1/4"-18 for PROS

This extension connector for the air inlet enables the use of larger couplings which does not fit our Mirka PROS sanders today. This extension connector is suitable for Mirka PROS sanders with newer serial number (3221xxxxxxxx and higher).

Extension Connector PT 1/4"-19 for PROS

Extension connector for the air inlet on Mirka PROS sanders. This connector enables the use of larger couplings.

Extension Hose 32mm x 10m

This 10 m extension hose can be cut into the desired length and connected to the MIN6519411 hose. Note that the hose adapter 32/54 mm should be removed. The extension hose can not be connected to the Mirka sanders directly. The hose is cylindrical with the same diameter throughout the whole length of the hose.

Extension shaft for Mirka LEROS

The extension shaft makes it easier to reach ceilings and high walls when sanding with the Mirka® LEROS wall sander. Just attach the extension shaft to your LEROS, and increase the reach by 3,5m.

Fairing

Fairing cover

Fan 125mm for CEROS

Fan 150mm/2,5mm for CEROS

Fan 150mm/5,0mm for CEROS

Fan 150mm/8,0mm for CEROS

Fan 2,5/5,0mm/30g Pad for DEROS 325/350

Fan 2,5mm/130g Pad for DEROS 150mm

Fan 5,0mm/130g Pad for DEROS 150mm

Fan 77mm/2,5mm for CEROS

Fan 8,0mm/130g Pad for DEROS 150mm

Fan Cover

Fan for DEOS

Fan for LEROS

Fastening Straps Kit 6/Pack

This hook and loop fastening strap kit enables attachment of the electrical cord to the vacuum hose.

Finessing Damper 60ml

For finessing operations with Polarstar SR3, SR5 or SR7 abrasives.This product dispenses quickly and neatly an appropriate amount of liquid to the surface. By using the finessing damper you'll get less excess splashing and wiping off and it helps to avoid skin contact with harmful liquids. Remember to clean the disc inbetween sanding operations, by gently running the disc against the damper head.

Flap Disc M-PRO 115x22mm ZIR 36

Flap Disc M-PRO 115x22mm ZIR 40

Flap disc for demanding applications. For aggressive grinding of metal surfaces, especially INOX. Suited for de-burring and grinding welded joints. Abrasive material: Zirconium. RPM max: 13 300.

Flap Disc M-PRO 115x22mm ZIR 60

Flap disc for demanding applications. For aggressive grinding of metal surfaces, especially INOX. Suited for de-burring and grinding welded joints. Abrasive material: Zirconium. RPM max: 13 300.

Flap Disc M-PRO 115x22mm ZIR 80

Flap disc for demanding applications. For aggressive grinding of metal surfaces, especially INOX. Suited for de-burring and grinding welded joints. Abrasive material: Zirconium. RPM max: 13 300.

Flap Disc M-PRO 127x22mm Inox ZIR 36

Flap Disc M-PRO 127x22mm Inox ZIR 40

Flap disc for demanding applications. For aggressive grinding of metal surfaces, especially INOX. Suited for de-burring and grinding welded joints. Abrasive material: Zirconium. RPM max: 12 200.

Flap Disc M-PRO 127x22mm Inox ZIR 60

M-PRO flap disc for grinding.

Flap Disc M-PRO 127x22mm Inox ZIR 80

Flap disc for demanding applications. For aggressive grinding of metal surfaces, especially INOX. Suited for de-burring and grinding welded joints. Abrasive material: Zirconium. RPM max: 12 200.

Flap Disc M-PRO 127x22mm Inox ZIR120

Mirka M-PRO flap disc 127mm. INOX. With zirkonium grain.

Foam Tape 13mm x 50m

The high density traditional soft foam tape for sealing of all common bodywork gaps. Mirka’s soft foam tape has a high quality adhesion that ensures safe adhesion even when repositioned. It is also easy to remove after use. The high density soft foam gives flexible positioning in angels as well as a quick and proper sealing.

Foam Tape Premium 20mm x 50m

The Premium foam tape is a unique and efficient way to mask car jambs. For use in all apertures, A, B and C posts. The Premium foam tape is shaped to give a precise fingertip adjustment and should be attached on moving parts. One continuous length.

Golden Finish Pad-1 155x25mm Yellow Waffle, 2/Pack

Mirka Golden Finish System. The fast and simple post paint solution. For sanding scratch removal.

Golden Finish Pad-1 85x25mm Yellow Waffle, 2/Pack

Mirka Golden Finish System. The fast and simple post paint solution. for sanding scratch removal.

Golden Finish Pad-2 155x25mm Black Waffle, 2/Pack

Mirka Golden Finish System. The fast and simple post paint solution. For hologram and swirl removal.

Golden Finish Pad-2 85x25mm Black Waffle, 2/Pack

Mirka Golden Finish System. The fast and simple post paint solution. For hologram and swirl removal.

Grease Gun for AOS 130NV

A grease gun, to be used when lubricating the Mirka AOS 130NV sander. The use of grease to extend the life of the tool is recommended. For use in industrial applications in heavy usage it is recommended to grease once a day. In more average use, such as in ART body shops, once a week is enough. With this grease gun it is recommended to use Molybdenum Disulfide base grease. Information about the usage of the grease gun is available in the manual of the Mirka AOS 130NV sander.

Grip for CEROS

Hand Towel Rack for Solution Trolley

Hand Towel rack for Solution Trolley

Handle Left

Handle Right

Handle Screw Kit

Hepa Filter Cover for DE 1230/1242

The HEPA Filter Cover for DE 1230/1242 is necessary to keep the HEPA filter (Mirkacode 8999100711) in place.

Hepa Filter for DE 1230/1242

The HEPA (High Efficiency Particulate Air) filter can be installed in addition to the standard filter to improve the filtration. By adding this filter you will get a triple filtration: 1. Fleece dust bag 2. Standard main filter 3. HEPA filter. Please note that adding this filter will not make a dust extractor DE 1230/42 an H-class extractor, even though the filter itself fulfills HEPA class H13 requirements. When installing a HEPA-filter for the first time, the HEPA Filter Cover for DE 1230/1242 (Mirkacode 8999100811) is necessary.

Hose 1,8m MPP9023 for PROS DB

Suitable for Mirka PROS 550DB and 650DB. (Mirka code: 8995550211 and 8995650211)

Hose 20mm x 0,5m + Connector

This conductive adapter enables a quick and easy change between Mirka® power tools with 19/20 mm dust extraction fittings. Fix the adapter on the tool and connect to any Mirka hose assembly. Electrical conductive (≤ 10⁶ Ω/square).

Hose 20mm x 5m for Hand Sanding Blocks

This 5 m hose for Mirka hand sanding blocks can be connected to existing Mirka dust extraction hose assemblies. The hose is conductive, which leads the sparks from static electricity (common in hand sanding) to the grounded dust extractor. Electrical conductive (≤ 10⁶ Ω/square).

Hose 25,4mm+Adapter 38mm MPA0392

Hose 27mm x 0,5m + Connector

This adapter + hose is suitable for all Mirka pneumatic sanders. Electrical conductive (≤ 10⁶ Ω/square).

Hose 27mm x 10m + Connector

A flexible suction hose connecting the sander and the dust extractor. Please note that this hose is conical. The conical dust extractor hose is designed to improve dust suction. Electrical conductive (≤ 10⁶ Ω/square).

Hose 27mm x 10m with Integrated Pneumatics

This Pneumatic Hose Assembly is 10m long, and can be directly connected to all our pneumatic CV machines. Electrical conductive (≤ 10⁶ Ω/square).

Hose 27mm x 4m + Connector

A flexible dust suction hose connecting the sander and the dust extractor. Please note that this hose is conical. The conical dust suction hose is designed to improve dust suction. Electrical conductive (≤ 10⁶ Ω/square).

Hose 28mmx1,8m MPA0412

Hose 4m for Miro 955/955-S

Dust extraction hose for Mirka® Miro 955 and 955-S. Antistatic (≤ 10¹¹ Ω/square)

Hose Adapter 28mm/56mm 15369

Mirka Orbital Sander Hose Adapter

Hose Adapter 32/54mm

Hose adapter Ø 32/54 mm for Mirka dust extractors. The adapter connects the hose into the dust extractor. Electrical conductive (≤ 10⁶ Ω/square). Delivered together with the following hoses: MIE6514511 / MIE6514511US, MIE6514711 / MIE6514711US,MIN6519411, MIN6519711, 8992514511, 8992514711 and 8992515011.

Hose Arm for Solution Trolley Double Hoses

This product can be assembled onto the Mirka solution trolley and enables more convenient working. By using the hose arm the operator ensures that the hose comes from above and reduces the risk of the hose harming the workpiece.

Hose Connector 32/32mm

Hose connector with diameter 32/32 mm. Delivered together with extension hose MIN6519711. Enables connection with the hose MIN6519411. Electrical conductive (≤ 10⁶ Ω/square).

Hose Connector for LEROS

Hose Sleeve

Hose Sleeve No. 30928 for DE 415/915

Hose Swivel Adapter 20/25,4mm

Hose swivel adapter 20/27 mm. Enables connecting a Ø 20 mm hose with a Ø 27 mm hose.

Hose Swivel Adapter 27/27mm

Hose swivel connector Ø 27/27 mm. Enables the connection of two hoses with the diameter 27 mm.

Hose Swivel Connector 20/20mm

Hose swivel connector Ø 20/20 mm. Enables the connection of two hoses with the diameter 20 mm.

Housing 77mm/125mm/150mm for CEROS

Housing for DEOS 353/383

Housing for DEOS 663

Housing for DEROS 550,625,650,680

Interface 100x152x152mm 32H 7mm, 1/Pack

The interface pad is used in combination with grip abrasives for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc. This interface pad is 7 mm thick and suitable for the Mirka® Deos Delta sander.

Interface 100x152x152mm 32H 7mm, 5/Pack

The interface pad is used in combination with grip abrasives for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc. This interface pad is 7 mm thick and suitable for the Mirka® Deos Delta sander.

Interface 115x230mm 32H 10mm, 1/Pack

The 10 mm thick interface strip is used in combination with grip sanding strips for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 115x230mm 32H 10mm, 5/Pack

Interface 125mm 33H 10mm, 1/Pack

The 10 mm thick multi hole interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 125mm 33H 10mm, 5/Pack

The 10 mm thick multi hole interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 125mm 33H 5mm, 5/Pack

This 5 mm interface enables a much smoother usage of the Mirka® PS 1437 polisher equipped with the hood. This interface is also recommended for 125 mm (5”) Mirka® PROS and Mirka® DEROS sanders. The 5 mm thick interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 125mm 44H 10mm, 5/Pack

The 10 mm thick multi interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 125mm 44H 5mm, 5/Pack

The 5 mm thick multi hole interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. The pad is developed to be used for light profile sanding, Paint Preparation sanding, Factory Primer (E-Coat) sanding and Top- and Clear Coat sanding. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 150mm 67H 10mm, 5/Pack

The 10 mm thick multi hole interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The interface pad is placed between the backing pad and the sanding disc.

Interface 150mm 67H 5mm, 5/Pack

The 5 mm thick multi hole interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. The pad is developed to be used for light profile sanding, Paint Preparation sanding, Factory Primer (E-Coat) sanding and Top- and Clear Coat sanding. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 200mm 89H 7mm, 1/Pack

This interface is suitable for use with 8" 200 mm 89 holes Net backing pad, 8295885111. The backing pad has been developed to be used with the 200 mm two-handed sander Mirka® ROS2 850CV. The 7 mm thick interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 225mm 25H for Mirka LEROS, 1/Pack

Interface 225mm 25H for Mirka LEROS, 3/Pack

3 mm thick soft interface for Mirka® LEROS backing pads. The interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 225mm 8+1H 15mm Hard, 1/Pack

A hard, 15 mm thick interface pad suitable for Miro 955/955S dry wall sanders. This interface is only to be used with Mirka's Net discs or Gold 16 holes discs. The interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 225mm 8+1H 17mm Medium, 1/Pack

A medium hard,17 mm thick interface suitable for Miro 955/955S dry wall sanders. This interface is only to be used with Mirka's Net discs or Gold 16 holes discs. The interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 225mm 8+1H 22mm Medium, 1/Pack

A medium hard, 22 mm thick interface suitable for Miro 955/955S dry wall sanders. This interface is only to be used with Mirka's Net discs or Gold 16 holes discs. The interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 70x125mm 13H 10mm, 5/Pack

A flexible interface for hand sanding blocks. This 10 mm thick interface strip is used in combination with grip sanding strips for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 70x198mm 56H 10mm, 1/Pack

A flexible interface for hand sanding blocks. This 10mm thick interface strip is used in combination with grip sanding strips for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 70x198mm 56H 10mm, 5/Pack

A flexible interface for hand sanding blocks. This 10 mm thick interface strip is used in combination with grip sanding strips for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 75x100mm 33H 7mm, 5/Pack

A flexible 7 mm thick interface pad, suitable for hand sanding or for orbital sanders. The interface pad is used in combination with grip sanding sheets for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding sheet.

Interface 77mm 6H 5mm, 5/Pack

The 5 mm thick multi interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours, with Mirka's net products. Using the multi interface pad will also produce a softer result. The interface pad is placed between the backing pad and the sanding disc.

Interface 80x230mm 55H 5mm, 1/Pack

This interface is specially develop for the Mirka® Handy hand sanding block.

Interface 81x133mm 54H 7mm, 5/Pack

A flexible 7 mm thick interface pad, suitable for hand sanding or for orbital sanders. The interface pad is used in combination with grip sanding sheets for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding sheet.

Joint Fork Kit

Joint Ring

Joint Screw Kit

Lambswool Pad 150mm Grip, 2/Pack

Mirka's basic natural wool pad is aimed for general purpose use, where the ratio of quality and price is in balance.

Lambswool Pad 180mm Grip, 2/Pack

Mirka's basic natural wool pad is aimed for general purpose use, where the ratio of quality and price is in balance.

Lambswool Pad 77mm Grip, 5/Pack

Mirka's basic natural wool pad is aimed for general purpose use, where the ratio of quality and price is in balance.

Lambswool Pad Pro 135mm Grip, 10/Pack

The pad is made of premium wool fibers. The wool fibers are optimized to keep the performance on a high level for demanding use. An excellent result is achieved when using the pad in combination with Mirka Polarshine® compounds 35, 15, 10 and 8. The pad is suitable for polishing all kinds of paintworks in ART, Marine and Wood sectors as well as OEM applications.

Lambswool Pad Pro 150mm Grip, 2/Pack

The pad is made of premium wool fibers. The wool fibers are optimized to keep the performance on a high level for demanding use. An excellent result is achieved when using the pad in combination with Mirka Polarshine® compounds 35, 15, 10 and 8. The pad is suitable for polishing all kinds of paintworks in ART, Marine and Wood sectors as well as OEM applications.

Lambswool Pad Pro 180mm Grip, 2/Pack

The pad is made of premium wool fibers. The wool fibers are optimized to keep the performance on a high level for demanding use. An excellent result is achieved when using the pad in combination with Mirka Polarshine® compounds 35, 15, 10 and 8. The pad is suitable for polishing all kinds of paintworks in ART, Marine and Wood sectors as well as OEM applications.

Lambswool Pad Pro 80mm Grip, 10/Pack

The pad is made of premium wool fibers. The wool fibers are optimized to keep the performance on a high level for demanding use. An excellent result is achieved when using the pad in combination with Mirka Polarshine® compounds 35, 15, 10 and 8. The pad is suitable for polishing all kinds of paintworks in ART, Marine and Wood sectors as well as OEM applications.

Lambswool Pad Pro 80mm Grip, 2/Pack

The pad is made of premium wool fibres. The wool fibers are optimized to keep the performance on a high level for demanding use. An excellent result is achieved when using the pad in combination with Mirka Polarshine® compounds 35, 15, 10 and 8. The pad is suitable for polishing all kinds of paintworks in ART, Marine and Wood sectors as well as OEM applications.

Lever 2,5mm for DEROS

Lever 3,0mm for DEOS

Lever 5,0mm for DEROS

Lever 8,0mm for DEROS

Lever Kit 77mm/150mm/2,5mm for CEROS

Locknut Tool for AOS 130NV

Mains Cable 4,3m 100-120V UK

Mains Cable UK 100-120V 1,5m for CEROS

Mains Cable UK 230V for CEROS

Mini-File 20x42mm Fine/Coarse

Ergonomically-designed rectification tool to remove runs and dirt nibs. Two-sided file held in place via magnet. One side is coarse-cut, and the other is fine-cut.

Mirka Case 400x300x158mm Yellow

Splash and dust resistant case: a sturdy storage solution that is easy to pack and move to the next work site. The case protects the tool and prolongs its lifetime. The connectable case system keeps tools and equipment organized and in one place. Hight 158mm.

Mirka Case 400x300x210mm Yellow

Splash and dust resistant case: a sturdy storage solution that is easy to pack and move to the next work site. The case protects the tool and prolongs its lifetime. The connectable case system keeps tools and equipment organized and in one place. Hight 210mm.

Mirka Connector for Air+Electric Hoses

Connector for air + electric hoses. Electrical conductive (≤ 10⁶ Ω/square). Comes with the following hoses: MIE6514511, MIE6514711, 8992514511, 8992514711 and 8992515011.

Mirka Multi-Purpose Belt

Easy-to-use, flexible belt with two pockets; the smaller pocket perfectly fits a cordless sander and the larger pocket can be used for accessories, such as microfibre cloths and a Polarshine bottle. The belt clips are covered with fabric.

Mirka Sleeve for Hose and Cable 3,5 m

Durable 3.5 m sleeve designed to be used with Mirka® DEROS, Mirka® DEOS and Mirka® LEROS standard hose (MIN6519411) and the 4.3 m cable. The sleeve makes handling easier and protects the work surface from scratches.

Motor 125mm for CEROS

Motor 150mm/2,5mm for CEROS

Motor 150mm/5,0mm for CEROS

Motor 150mm/8,0mm for CEROS

Motor 2,5/130g Pad DEROS X 110V

Motor 2,5mm/130g Pad for DEROS 150mm 230V

Motor 2,5mm/30g Pad for DEROS 325 230V

Motor 5,0/100g Pad DEROS X 110V

Motor 5,0/130g Pad DEROS X 110V

Motor 5,0mm/100g Pad for DEROS 125mm 230V

Motor 5,0mm/130g Pad for DEROS 150mm 230V

Motor 5,0mm/30g Pad for DEROS 350 230V

Motor 5,0mm/30g Pad for DEROS 350X 110V

Motor 77mm/2,5mm for CEROS

Motor 8,0mm/130g Pad for DEROS 150mm 230V

Motor Assembly 110V for DEOS

Motor Assembly 230V for DEOS

Motor Assembly 230V for LEROS

Motor Tool for Mirka Cordless 32mm Machines

Motor Tool for Mirka Machines

Net Interface 150mm 4mm, 2/Pack

This unique interface provides great dust extraction when sanding with Mirka non-vowen products. The interface removes the need to use velour on a non-vowen product and thereby enables usage of both Mirlon and Mirlon Total, as discs or sheets when doing tool-sanding.The unique construction is based on a patented spacer backing.

O-Ring Kit for LEROS

Pad Saver 100x152x152mm 32H, 1/Pack

Pad saver suitable for the Mirka® DEOS Delta. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 100x152x152mm 32H, 5/Pack

Pad saver suitable for the Mirka® DEOS Delta. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 115x230mm 10H, 5/Pack

A pad saver 115 x 230 mm for backing pads. This pad saver is designed with 10 holes. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding sheet, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 125mm 33H, 5/Pack

Pad saver for 125mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 125mm 44H, 5/Pack

Pad saver for 125mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regulary. The pad savers prolong the life of the backing pad.

Pad Saver 150mm 57H, 5/Pack

Pad saver for 150mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 150mm 67H, 5/Pack

Pad saver for 150mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 200mm 89H, 3/Pack

Pad saver for 200mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 225mm 25H for Mirka LEROS, 1/Pack

Pad saver suitable for the Mirka LEROS. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 225mm 27H, 1/Pack

Pad saver for 225mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regulary. The pad savers prolong the life of the backing pad. Please note that this particular pad saver does not fit the Mirka® LEROS machine. This one enables use of Mirka Abranet on competitors’ wall sanders.

Pad Saver 70x125mm 100/Pack

Pad Saver 70x198mm 56H, 5/Pack

Pad saver for 70x198mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding strips, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 70x400mm 14H, 5/Pack

Pad saver for 70x400mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding strips, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 75x100mm 33H, 5/Pack

Pad saver for 75x100mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding sheet, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 77mm 6H, 5/Pack

Pad saver for 77mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regulary. The pad savers prolong the life of the backing pad.

Pad Saver 81x133mm 54H, 5/Pack

Pad saver for 81x133mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 81x165mm DEOS 353 Extended 50H 1/Pack

A pad saver suitable to use together with the extension backing pad for the Mirka® DEOS 353 (8292366011). The extension enables reaching further into narrow places, one specific focus application is sanding of window shutters. Mirka's pad savers are designed to protect the backing pad from wear and tear. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Screw Kit for DEOS

Pad Washer Universal

The Mirka® universal pad washer is a professional system for cleaning all kind of pads. It is designed to be used both with a circular and orbital polisher. The pad washer is a versatile and durable product. A clean pad ensures a good polishing result and extends the life of the polishing pads.

Pad Wrench 17mm (curved) MPA0146 for 77mm

PCB Screw Kit

PCB Spacer Kit

Pinion Tool for PS 1437

Plier for CEROS Machine

Polishing Felt Pad 150x6mm Grip White, 2/Pack

Polishing Felt Pad 200x6mm Grip White, 2/Pack

Polishing Foam Pad 135x25mm Yellow Waffle, 1/Pack

A polishing pad with medium density hardness and waffle shape. The durable reticulated foam has an excellent elasticity. The waffle shape has an optimized pattern which improves the cutting performance and reduces the surface temperature during the polishing process. The pad is designed to be used in combination with Polarshine® Polishing Compounds, for both cutting with Polarshine® 15 and polishing with Polarshine® 10 and 8. The foam pad is suitable for all kinds of polishing processes: paintworks in ART, Marine and Wood sectors as well as Vehicle and Tier1.

Polishing Foam Pad 135x25mm Yellow Waffle,10/Pack

A polishing pad with medium density hardness and waffle shape. The durable reticulated foam has an excellent elasticity. The waffle shape has an optimized pattern which improves the cutting performance and reduces the surface temperature during the polishing process. The pad is designed to be used in combination with Polarshine® Polishing Compounds, for both cutting with Polarshine® 15 and polishing with Polarshine® 10 and 8. The foam pad is suitable for all kinds of polishing processes: paintworks in ART, Marine and Wood sectors as well as Vehicle and Tier1.

Polishing Foam Pad 150x25mm Black Flat, 2/Pack

A reticulated flat foam pad for hologram removal gives an excellent finishing on both fresh and fully cured paint works. The good balance between elasticity and density in the foam contributes to the final result. The pad is designed to be used in combination with Polarshine® polishing compound VF5 and with Polarshine® 3 Antistatic wax.

Polishing Foam Pad 150x25mm Black Waffle, 2/Pack

A reticulated waffle shape structured foam pad for hologram removal gives an excellent finishing on both fresh and fully cured paint works. The good balance between elasticity and density in the foam contributes to the final result. The pad is designed to be used in combination with Polarshine® polishing compound VF5 and with Polarshine® 3 Antistatic wax.

Polishing Foam Pad 150x25mm Orange Waffle, 2/Pack

A reticulated foam has an excellent balance in elasticity and softness which remains during usage, and is available as waffle shape structured. The waffle shape has an optimised pattern which gives an improved cutting performance with long life and reduces the surface temperature during polishing. The orange foam is softer than our yellow foam and leaves a better gloss and less holograms. Well suitable for softer clear coats and paints to achieve a perfect finish in one step process for vehicle and Tier 1 applications. For wood high gloss the orange waffle pad is ideal for the second polishing step in order to get an increased gloss level and to remove holograms. The pad is especially well suited for darker colors or softer paints and lacquers. The pads are designed to be used for polishing in combination with Polarshine® polishing compounds 12, 10 and 8.

Polishing Foam Pad 150x25mm Yellow Flat, 2/Pack

A flat polishing pad with medium density hardness. The durable reticulated foam has an excellent elasticity. The pad is designed to be used in combination with Polarshine® Polishing Compounds, for both cutting with Polarshine® 15 and polishing with Polarshine® 10 and 8. The foam pad is suitable for all kinds of polishing processes: paintworks in ART, Marine and Wood sectors as well as Vehicle and Tier1.

Polishing Foam Pad 150x25mm Yellow Waffle, 2/Pack

A polishing pad with medium density hardness and waffle shape. The durable reticulated foam has an excellent elasticity. The waffle shape has an optimized pattern which improves the cutting performance and reduces the surface temperature during the polishing process. The pad is designed to be used in combination with Polarshine® Polishing Compounds, for both cutting with Polarshine® 15 and polishing with Polarshine® 10 and 8. The foam pad is suitable for all kinds of polishing processes: paintworks in ART, Marine and Wood sectors as well as Vehicle and Tier1.

Polishing Foam Pad 200x25mm Black Flat, 2/Pack

A reticulated flat foam pad for hologram removal gives an excellent finishing on both fresh and fully cured paint works. The good balance between elasticity and density in the foam contributes to the final result.

Polishing Foam Pad 200x35mm Yellow Waffle, 2/Pack

A polishing pad with medium density hardness and waffle shape. The durable reticulated foam has an excellent elasticity. The waffle shape has an optimized pattern which improves the cutting performance and reduces the surface temperature during the polishing process. The pad is designed to be used in combination with Polarshine® Polishing Compounds, for both cutting with Polarshine® 15 and polishing with Polarshine® 10 and 8. The foam pad is suitable for all kinds of polishing processes: paintworks in ART, Marine and Wood sectors as well as Vehicle and Tier1.

Polishing Foam Pad 77x20mm White Retic., 20/Pack

A flat hard white foam pad, designed for OEM applications and mainly to be used with the Mirka ROP2-312NV polisher. The foam pad is produced from reticulated foam, which is more stable and gives a faster cut and a longer lifetime. The pad cools down faster after polishing, which enables the pad to keep the stable and rigid structure.

Polishing Foam Pad 85x20mm White Flat Ret, 20/Pack

A flat hard white foam pad, designed for OEM applications and mainly to be used with the Mirka ROP2-312NV polisher. The foam pad is produced from reticulated foam, which is more stable and gives a faster cut and a longer lifetime. The pad cools down faster after polishing, which enables the pad to keep the stable and rigid structure.

Polishing Foam Pad 85x20mm Yellow Flat, 2/Pack

The durable reticulated foam has an excellent elasticity which remains during usage. The pads are designed to be used in combination with Polarshine® polishing compounds, both for cutting with 15 and polishing with 10 and 8. Suitable for polishing processes of all kinds of paintworks in ART, Marine and Wood sectors as well as Vehicle and Tier1.

Polishing Foam Pad 85x20mm Yellow Flat, 20/Pack

The durable reticulated foam has an excellent elasticity which remains during usage. The pad is designed to be used in combination with Polarshine® Polishing Compounds, for both cutting with Polarshine® 15 and polishing with Polarshine® 10 and 8. Suitable for polishing processes of all kinds of paintworks in ART, Marine and Wood sectors as well as Vehicle and Tier1.

Polishing Foam Pad 85x25mm Black Flat, 2/Unit

A reticulated flat foam pad for hologram removal gives an excellent finishing on both fresh and fully cured paint works. The good balance between elasticity and density in the foam contributes to the final result. The pad are designed to be used in combination with Polarshine finishing compounds F05, VF5 and with Polarshine 3 Nano wax.

Polishing Foam Pad 85x25mm Black Waffle, 2/Pack

A reticulated waffle shape structured foam pad for hologram removal gives an excellent finishing on both fresh and fully cured paint works. The good balance between elasticity and density in the foam contributes to the final result. The pad is designed to be used in combination with Polarshine® polishing compound VF5 and with Polarshine® 3 Antistatic wax.

Polishing Foam Pad 85x25mm Burgundy Waffle,20/Pack

Mirka burgundy waffle pad is suitable for hard and medium hard coatings, providing a fast cut with good gloss. The burgundy foam is stronger than our yellow waffle foam providing a stable polishing process.

Polishing Foam Pad 85x25mm Orange Waffle, 2/Pack

A reticulated foam has an excellent balance in elasticity and softness which remains during usage, and is available as waffle shape structured. The waffle shape has an optimised pattern which gives an improved cutting performance with long life and reduces the surface temperature during polishing. The orange foam is softer than our yellow foam and leaves a better gloss and less holograms. Well suitable for softer clear coats and paints to achieve a perfect finish in one step process for vehicle and Tier 1 applications. For wood high gloss the orange waffle pad is ideal for the second polishing step in order to get an increased gloss level and to remove holograms. The pad is especially well suited for darker colors or softer paints and lacquers. The pads are designed to be used for polishing in combination with Polarshine® polishing compounds 12, 10 and 8.

Polishing Foam Pad 85x25mm Orange Waffle, 20/Pack

A reticulated foam has an excellent balance in elasticity and softness which remains during usage, and is available as waffle shape structured. The waffle shape has an optimised pattern which gives an improved cutting performance with long life and reduces the surface temperature during polishing. The orange foam is softer than our yellow foam and leaves a better gloss and less holograms. Well suitable for softer clear coats and paints to achieve a perfect finish in one step process for vehicle and Tier 1 applications. For wood high gloss the orange waffle pad is ideal for the second polishing step in order to get an increased gloss level and to remove holograms. The pad is especially well suited for darker colors or softer paints and lacquers. The pads are designed to be used for polishing in combination with Polarshine® polishing compounds 12, 10 and 8.

Polishing Foam Pad 85x25mm Yellow Waffle, 2/Pack

A polishing pad with medium density hardness and waffle shape. The durable reticulated foam has an excellent elasticity. The waffle shape has an optimized pattern which improves the cutting performance and reduces the surface temperature during the polishing process. The pad is designed to be used in combination with Polarshine® Polishing Compounds, for both cutting with Polarshine® 15 and polishing with Polarshine® 10 and 8. The foam pad is suitable for all kinds of polishing processes: paintworks in ART, Marine and Wood sectors as well as Vehicle and Tier1.

Polishing Foam Pad 85x25mm Yellow Waffle, 20/Pack

A polishing pad with medium density hardness and waffle shape. The durable reticulated foam has an excellent elasticity. The waffle shape has an optimized pattern which improves the cutting performance and reduces the surface temperature during the polishing process. The pad is designed to be used in combination with Polarshine® Polishing Compounds, for both cutting with Polarshine® 15 and polishing with Polarshine® 10 and 8. The foam pad is suitable for all kinds of polishing processes: paintworks in ART, Marine and Wood sectors as well as Vehicle and Tier1.

POLISHING PAD 77mm ORANGE 2/PACK

Orange flat foam pad 3" 77x25 mm 2-pack

Power and Signal Cable for LEROS 950

Power for CEROS

Power Socket Assembly Kit

Power Tool Hanger A

Tool hook for Mirka® ROS / Mirka® CEROS 77 mm Mirka® ROP2 77 mm, 125 mm Mirka® RP 300NV Mirka® AOS Suitable for the Work Station for DE 1230/1242. Is to be hooked on to the perforated panel.

Power Tool Hanger B

Tool hook for Mirka® OS Mirka® CEROS/DEROS 125 mm, 150 mm Mirka® DEOS Suitable for the Work Station for DE 1230/1242. Is to be hooked on to the perforated panel.

Power Tool Hanger B Long

Power Tool Hanger C

Tool hook for Mirka® ROS Mirka® CEROS 77 mm Mirka® ROP2 77 mm, 125 mm Mirka® RP 300NV / AOS Mirka® CEROS /DEROS 125 mm, 150 mm Mirka® ROS/PROS 125mm, 150mm & 200mm Polishing machines Suitable for the Work Station for DE 1230/1242. Is to be hooked on to the perforated panel.

Pressing Tool T-1A

Pressing Tool T-1B

Pressing Tool T-2A

Pressing Tool T-2B

Pressing Tool T-3A

Pressing Tool T-3B

Pressing Tool T-4A

Pressing Tool T-4B

Pressing Tool T-5A

Pressing Tool T-5B

Pressing Tool T-8

Pushlock Washer 10mm for DEOS

Quick Connector, Soft 25,4mm

A Soft Quick connector that enables a quick and easy change of tool to the vacuum hose. Suitable for all models of Mirka® DEROS, DEOS, LEROS and PROS. Please note that this quick connector is without swivel function and therefore is not suitable for the DecoSander.

Quick Disc 50mm ALO 120

Quick Disc 50mm ALO 36

High performance multi-purpose economy aluminium oxide Quick Disc, ideal for general applications. Especially suitable for deburring. The typical TR (SL3) assembly and disassembly system of the disc is fast for increase productivity, substantially reducing working time. Maximum operating speed 19 000 rpm.

Quick Disc 50mm ALO 50

Strong cotton laminated backing. Durability for edge wear and fray resistance within metal working. Especially developed for blending. The typical TR (SL3) assembly and disassembly system of the disc is fast for increase productivity, substantially reducing working time. Maximum operating speed 19 000 rpm.

Quick Disc 50mm ALO 80

Quick Disc 50mm CER 36

Quick Disc with high performance ceramic grain and a heavy Y weight polyester backing. The disc has a high metal removal rate and a long lifetime. Suitable for deburring and blending. The typical TR (SL3) assembly and disassembly system of the disc is fast for increase productivity, substantially reducing working time.Maximum operating speed 19 000 rpm.

Quick Disc 50mm CER 50

Quick Disc with active fillers for aggressive stock removal. Excellent durability and grain adhesion, cool cut and high performance and hard to grind alloys. The typical TR (SL3) assembly and disassembly system of the disc is fast for increase productivity, substantially reducing working time.Maximum operating speed19 000 rpm.

Quick Disc 50mm CER 80

Quick Disc 75mm Medium

Quick Disc 76mm ALO 36

Quick Disc for the aviation industry. The typical TR (SL3) assembly and disassembly system of the disc is fast for increase productivity, substantially reducing working time.Maximum operating speed 12 800 rpm.

Quick Disc 76mm ALO 50

Quick Disc with open-coat grain distribution and reduced clogging. Used especially on marine applications for stock removal. The typical TR (SL3) assembly and disassembly system of the disc is fast for increase productivity, substantially reducing working time. Maximum operating speed 12 800 rpm.

Quick Disc 76mm ALO 80

Remint Polishing Pad 77mm Grip Step 1, 5/Pack

Polishing pad, 77mm with grip backing, to be used together with the Remint™ polishing compound for the first step of polishing to achieve gloss after scratch removal from chemically strengthened glass.

Remint Polishing Pad 80mm PSA Liner Step2, 20/Pack

Polishing pad, 80mm with PSA, to be used together with the Remint™ polishing compound for the second step of final polishing to achieve gloss after scratch removal from chemically strengthened glass.

Rewireable Connector HP-9R

Rewireable Mains Cable 4,3m CE 100-120V UK

Sanding Plate Base 225mm Grip 16H for MIRO

Sanding Sponge 100x70x28mm C/C 36/36, 100/Pack

Sanding Sponge 100x70x28mm F/F100/100, 100/Pack

Sanding sponge with a hard foam plastic core, entire surface coated with grains. Suitable for sanding 90 degree angles. Waterproof.

Sanding Sponge 100x70x28mm M/M 60/60, 100/Pack

Sanding Sponge 120x98x13mm C/C 36/36, 100/Pack

Sanding Sponge 120x98x13mm 180/180 SF, 100/Pack

Sanding sponge with a soft foam plastic core, grains on two sides. Used for sanding profiled and rounded surfaces.

Sanding Sponge 120x98x13mm 220/220 SF+, 100/Pack

Sanding sponge with a soft foam plastic core, grains on two sides. Used for sanding profiled and rounded surfaces.

Sanding Sponge 120x98x13mm F/F100/100, 100/Pack

Flexible sanding sponge for versatile sanding. Grit 100 (fine) for sanding profiled and rounded surfaces.

Sanding Sponge 120x98x13mm M/M 60/60, 100/Pack

Sanding Sponge Angled 125x85x25mm 120, 100/Pack

Sanding Sponge Angled 125x85x25mm 80, 100/Pack

Sanding Station Wood

Screw Kit Fairing

Screw Kit for CEROS

Screw Kit for DEROS/DEOS

Screw Kit Motor

Screw Kit Y-Branch

Seal for DEOS 353/383

Shark Blade 48x28mm CrN

A professional precision tool for removal of minor lacquer defects like dust enclosures and runs.

Shelf for Solution Trolley

Shelf for Solution Trolley

Shelf for Work Station for DE 1230/1242

The shelf for the work station for Mirka Dust Extractor 1230/1242 -series is ideal for storage of 4 x 150 mm disc boxes.

Shroud 77mm for CEROS

Soft Connector 27mm

Soft Connector, connects the sander to the dust extractor hose Ø 27 mm. Electrical conductive (≤ 10⁶ Ω/square). Suitable for all Mirka® DEOS, Mirka® DEROS, Mirka® LEROS and Mirka® PROS machines. Also suitable for the Mirka® Decosander and the Dust Suction Hood, as well as sanders of most other brands. Not suitable for Mirka® OS, Mirka® ROS nor Mirka® CEROS.

Soft Holder 55-65 mm

Soft Sanding Pad 115x140mm 220 (SF), 20/pack

Sanding sponge for wood, paint, metal, glass fiber, coatings and composites. Both dry and wet sanding.

Soft Sanding Pad 115x140mm 120 (F), 20/Pack

Sanding sponge for wood, paint, metal, glass fiber, coatings and composites. Both dry and wet sanding.

Soft Sanding Pad 115x140mm 400 (UF), 20/Pack

Sanding sponge for wood, paint, metal, glass fiber, coatings and composites. Both dry and wet sanding.

Soft Sanding Pad 115x140mm 60 (M), 20/Pack

Sanding sponge for wood, paint, metal, glass fiber, coatings and composites. Both dry and wet sanding.

Soft Sanding Pad 115x140mm 600 (MF), 20/Pack

Sanding sponge for wood, paint, metal, glass fiber, coatings and composites. Both dry and wet sanding.

Solution Trolley

This trolley is developed to be used as a part in Mirka´s solution selling strategy. It has space for the Mirka dust extractor, abrasives, tools and polishing bottles. Abrasives can be put on the top level for easy availability. There are also two drawers and a locker for storage of tools and abrasives. There is a handle for a few polishing bottles and a holder for two random orbital sanders and one orbital square sander. The trolley has also a holder with space for three hoses. In addition to this the package contains assemble instructions, a tool and keys for the locker. The package size is 92 x 56 x 54 cm.

Spacer for DEOS, 20/Pack

Spare Part Kit for Pad Washer

Spare part kit for Mirka® pad washer.

Spindle + Bearing Assembly for LEROS

Spindle Bearing Dual Seal Kit 125/150mm

Sponge 4-Sided 100x70x28mm P180, 100/Box

Sanding sponge with a hard foam plastic core, entire surface coated with grains. Suitable for sanding 90 degree angles. Waterproof.

Start Button Kit for CEROS

Start Button Kit for DEROS/DEOS

Store Rack Hooks, 20/Pack

Store Rack Plain 90x180cm + Sign, No. 1/3

Store Rack Plain 90x180cm + Sign, No. 2/3

Store Rack Plain 90x180cm + Sign, No. 3/3

Store Rack Shelf 45x22 cm

This shelf is specially designed for the black Store rack 90x180 cm, code: BM9190114001.

Store Rack Shelf 90x22 cm

This shelf is specially designed for the black Store rack 90x180 cm, code: BM9190114001.

Store Rack Tool Holder for Sander

This tool holder is specially designed for the black Store rack 90x180 cm, code: BM9190114001.

Store Rack Tool Holder for Wall Sander

This tool holder for a wall sander is specially designed for the black Store rack 90x180 cm, code: BM9190114001.

Support and 5.1mm Punch for AOS 130NV

Swivel Exhaust for DEROS Black, 180º

Swivel Exhaust Kit for DEOS 353/383

Swivel Exhaust Kit for DEOS 663

Swivel Exhaust Kit for DEROS 125/150mm

Swivel Exhaust Kit for DEROS 325/350

Tack Cloth 320x400mm, 10/Unit

This soft, non-woven cloth with optimal thickness, is silicon free. The cloth has a durable construction with folded edges to resist tearing and lint of fibres. It leaves no traces on the surface and does not dry out due to the optimal level of tack-coating.The cloth can be used for final surface cleaning of dirt prior to painting or before any other surface treatment.

Trolley for Dust Extractor

A stable trolley with adjustable height and two hollow sheet metal shelves, the lower for the Dust Extractor and the other for products. A hook and loop strip is also included on the right side to attach hand blocks to and an adjustable hanging device on the left side for hanging tools on. Two hooks on the back side to hang the dust hose on is also included. This trolley is also suitable for a Dust Extractor together with the Miro 955 wall sander.

Twisted Wool Pad 150mm Grip

The twisted wool pad is a pure wool pad for coarser polishing in marine, wood and ART applications. It is mainly used with Polarshine® polishing compounds 35 and 20.

Twisted Wool Pad 180mm Double Sided

The twisted wool pad is a pure wool pad for coarser polishing in marine, wood and ART applications. It is mainly used with Polarshine® polishing compounds 35 and 20.

Twisted Wool Pad 180mm Grip

The twisted wool pad is a pure wool pad for coarser polishing in marine, wood and ART applications. It is mainly used with Polarshine® polishing compounds 35 and 20.

Type Label Kit for DEOS 353,383 220-240V

Type Label Kit for LEROS 220-240V

USB Bluetooth 4.0 Adapter

USB Cable for CEROS Machines

Vacuum Block Disc 125mm, 5/Pack

The vacuum block discs should be used if the vacuum dust extraction cannot be disconnected during wet sanding. The vacuum block disc protects your sander and dust extraction system, since it prevents moisture from entering the sander.

Vacuum Block Disc 150mm, 5/Pack

The vacuum block discs should be used if the vacuum dust extraction cannot be disconnected during wet sanding. The vacuum block disc protects your sander and dust extraction system, since it prevents moisture from entering the sander.

Vacuum Block Disc 77mm, 5/Pack

The vacuum block discs should be used if the vacuum dust extraction cannot be disconnected during wet sanding. The vacuum block disc protects your sander and dust extraction system, since it prevents moisture from entering the sander.

Waterspray Can 0,65 L

Waterspray Can

Wheel 200mm and Lock Washer Dust Extractor Trolley

Work Station for DE 1230/1242

The work station for Mirka Dust Extractor 1230/1242-series is a compact shelf and hook system. The functional work station has dedicated space for Mirka cases and abrasives as well as hooks for machines and hose storage. The work station should be fastened to the dust extractor with the case fastening accessory for DE 1230/1242, that needs to be ordered separately. Note that pneumatic machines also need the Pneumatic Box for DE 1230/1242 230V.

Y-Branch Base

Y-Branch Top