Power Tools Accessories

Balancing Screw Kit for DEROS/PROS

Balancing Screw Kit for DEROS/PROS

 A tool kit for reducing vibrations when sanding with pad saver or interface. Disconnect air supply/power cable. Remove the backing pad and add hex nuts and screws. Tighten to 2 Nm. Carry Bag for Mirka Hose Grey

Carry Bag for Mirka Hose Grey

Store all your hoses in seconds and avoid getting the dust from the hoses in your van and on your tools. This high quality Carry Bag makes life easier. Fits all Mirka® hoses and also the box that the hoses are delivered in. This Carry Bag can also be used to transport other surface finishing equipment. The size of the Carry Bag is (L x W x H): 55 cm x 25 cm x 47 cm. Grease Gun for AOS 130NV

Grease Gun for AOS 130NV

 A grease gun, to be used when lubricating the Mirka AOS 130NV sander. The use of grease to extend the life of the tool is recommended. For use in industrial applications in heavy usage it is recommended to grease once a day. In more average use, such as in ART body shops, once a week is enough. With this grease gun it is recommended to use Molybdenum Disulfide base grease. Information about the usage of the grease gun is available in the manual of the Mirka AOS 130NV sander. Hepa Filter Cover for DE 1230/1242

Hepa Filter Cover for DE 1230/1242

 The HEPA Filter Cover for DE 1230/1242 is necessary to keep the HEPA filter (Mirkacode 8999100711) in place. Hepa Filter for DE 1230/1242

Hepa Filter for DE 1230/1242

 The HEPA (High Efficiency Particulate Air) filter can be installed in addition to the standard filter to improve the filtration. By adding this filter you will get a triple filtration: 1. Fleece dust bag 2. Standard main filter 3. HEPA filter. Please note that adding this filter will not make a dust extractor DE 1230/42 an H-class extractor, even though the filter itself fulfills HEPA class H13 requirements. When installing a HEPA-filter for the first time, the HEPA Filter Cover for DE 1230/1242 (Mirkacode 8999100811) is necessary. Hose 27mm x 10m with Integrated Pneumatics

Hose 27mm x 10m with Integrated Pneumatics

 This Pneumatic Hose Assembly is 10m long, and can be directly connected to all our pneumatic CV machines. Electrical conductive (≤ 10⁶ Ω/square). Hose 27mm x 15m with Integrated Pneumatics

Hose 27mm x 15m with Integrated Pneumatics

 This Pneumatic Hose Assembly is 15m long, and can be directly connected to all our pneumatic CV machines. Hose 27mm x 5,5m with Integrated Pneumatics

Hose 27mm x 5,5m with Integrated Pneumatics

 This Pneumatic Hose Assembly is ergonomic with a weight of just 1850 grams. It is very flexible and fully conductive. This hose can be directly connected to all our pneumatic CV machines. Electrical conductive (≤ 10⁶ Ω/square). Mirka 2-Way Electric Adapter 230V EU, Black

Mirka 2-Way Electric Adapter 230V EU, Black

 Mirka Multi-Purpose Belt

Mirka Multi-Purpose Belt

 A Multi-Purpose Belt to carry all you need to perform the cordless spot repair process. Easy-to-use and flexible with two pockets; the smaller pocket perfectly fits a cordless sander and the larger pocket can be used for accessories, such as microfibre cloths and a Polarshine bottle. The belt clips are covered with fabric. A support brace to more comfortably carry the Multi-Purpose Belt can be bought separately (8991199311). Mirka Sleeve for Hose and Cable 3,8 m

Mirka Sleeve for Hose and Cable 3,8 m

 A durable 3.8m long sleeve for cable and hose, that makes handling easier and protects the work surface from scratches. Designed to be used with Mirka® DEROS, Mirka® DEOS and Mirka® LEROS standard hose (MIN6519411) and the 4.3 m cable. Mirka Sleeve for Hose and Cable 5,8 m

Mirka Sleeve for Hose and Cable 5,8 m

 A durable sleeve for cable and hose, that makes handling easier and protects the work surface from scratches. Designed to be used with Mirka® DEROS, Mirka® DEOS and Mirka® LEROS and the 6 m long cable and hose. Mirka Sleeve for Hose and Cable 9,8 m

Mirka Sleeve for Hose and Cable 9,8 m

 A durable sleeve for cable and hose, that makes handling easier and protects the work surface from scratches. Designed to be used with Mirka® DEROS, Mirka® DEOS and Mirka® LEROS and the 10 m long cable and hose. Mirka Support Brace for Multi-Purpose Belt

Mirka Support Brace for Multi-Purpose Belt

 Support brace to more comfortably carry the Multi-Purpose Belt (8991199111) when used for an extensive time period. Keeps the belt more steady and distributes the weight more evenly and ergonomically. Pad Wrench 13mm MPA3226 for RPS

Pad Wrench 13mm MPA3226 for RPS

 Suitable for Mirka® RPS 300CV. Pad Wrench 17mm for 77mm machines

Pad Wrench 17mm for 77mm machines

 Pad Wrench 24mm for 125/150mm Machines

Pad Wrench 24mm for 125/150mm Machines

 Suitable for 125 / 150 mm electric and pneumatic sanders as well two-handed pneumatic sanders and polishers. Quick Lock Kit AP147

Quick Lock Kit AP147

 Quick Lock kit for Mirka® AP 300NV. Enables the use of Quick Lock backing pads. Swivel Exhaust for DEROS Black, 180º

Swivel Exhaust for DEROS Black, 180º