2+1 years
Register Your Tool
All Mirka power tools have a standard two-year warranty. Get an additional 1 year of warranty free of charge by registering your tool within 30 days of purchase.
When and how to oil a pneumatic sander?
Answer: The tool requires proper lubrication to prevent premature wear - keep it well oiled and it will continue to perform well.
If a tool is used continuously every day, it is a good idea to add 2 drops of oil at the start of each day.
If you experience the pneumatic sander gradually feeling slower, add 1-2 drops of oil into the air inlet and keep the machine running for 30 seconds so that excess oil is drained.
Make sure you are using correct oil for pneumatic tools. Only oil pneumatic tools our electric tools do not require and oil. If a sander is not properly lubricated, it will wear prematurely and perform poorly. However, the sander should not be over-lubricated. If there is oil dripping from the muffler, then the tool is being oiled too much. If the filter is saturated with oil, the muffler must be replaced.
If available, use an FRL unit - FRL stands for Filter, Regulator and Lubricator.
Related articles
What should I do if I receive a motor/PCB hot warning?
If you receive a motor/PCB hot warning on your Mirka® DEXOS dust extractor, don't panic. This guide will walk you through the steps to safely resolve the issue and ensure your dust extractor is back to optimal performance
Low Air Flow Alarm
Having trouble with a low airflow alarm? In this video, we guide you through four simple steps to resolve the issue and get your system running smoothly. Follow these steps to maintain optimal airflow and prevent future issues!
Why won’t my Mirka® DEXOS dust extractor start?
Having trouble starting your Mirka® DEXOS Dust Extractor? Follow these simple troubleshooting steps to get it running smoothly again! First, check the power connection to ensure the cord is plugged in and electricity is flowing. Next, verify that the main switch on the back is turned on. Finally, press the On/Off button and the Play button on the front of the machine. Watch this quick guide for step-by-step instructions to solve the issue and get your dust extractor working!