Backing pad suitable for the Mirka® DEOS Delta sander.

Plateau 125mm auto-agrippant 8 trous sphérique

Plateau 125mm auto-agrippant 8 trous sphérique

Plateau 32mm autocollant souple, 5/unité

Plateau 32mm autocollant souple, 5/unité

Plateau 70x198mm Grip 56 trous

Plateau 70x198mm Grip 56 trous

Plateau Net 125mm 5/16" auto-agrippant 28T Souple

A soft 125 mmm backing pad, especially suited for profile sanding and where a soft edge is needed.

Plateau Net 125mm 5/16" Grip 28T 130g M

Convient à toutes les ponceuses Mirka PROS et Mirka DEROS de diamètre 150 mm. Ce plateau de 130 g vous permet de changer de taille et d'utiliser des disques de ponçage de 125 mm.

Plateau Net 125mm 5/16" Grip 28T M

Plateau Net 150mm 5/16" auto-agrippant 48T souple

A soft 150 mmm backing pad, especially suited for profile sanding and where a soft edge is needed.

Plateau Net 150mm 5/16" Grip 48T medium

Plateau Net 200mm Grip 89 trous

Plateau Net 200mm Grip 89 trous

Plateau Quick Lock 32mm Grip souple, 10/unité

Plateau Quick Lock 32mm Grip souple, 10/unité

Plateau Quick Lock 32mm PSA souple, 10/unité

Plateau Quick Lock 32mm PSA souple, 10/unité

Plateau universel 150mm 5/16"+ M8 Grip 61T medium

Abranet medium density Unipad 150 mm (6") for all hole combinations. This Abranet unipad is optimized for flat surfaces and has a high edge durability. 15 larger holes allow use of conventional discs with 6 h, 6 + 1 h, 9 h and 15 h. Suitable for narrow shroud machines but not recommended to be used with 150 mm ROS machines, because the combination of Unipad + wide/Abranet shroud machines does not give the optimal dust extraction. Delivered with one 150 mm (6") pad saver. To ensure correct installation, always use the supplied spacing washers, making sure that a minimum gap exists between the sander’s shroud and the top part of the backing pad, to prevent friction between the two parts. Tighten the screw hard. The backing pad should never turn idle. From time to time, check that the screw is well tight.