8 x1" Quick Disconnect Twisted Wool Pad, 1/Pkg.

8" Quick Disconnect Black Polishing Waffle, 1/Pkg.

8" Quick Disconnect Orange Waffle, 1/Pkg.

8" Quick Disconnect White Waffle Pad, 1/Pkg.

Adapter & Vacuum Hose 1" x 19.7", 1/Pkg

This adapter + hose is suitable for all Mirka pneumatic sanders. Electrical conductive (≤ 10⁶ Ω/square).

Adapter for Deco Sander 1.2"-1.9", 1/Pkg

Adapter for connecting the dust extractor hose to the dust extractor. Can be cut to fit dust extractors of other brands. Electrical conductive (≤ 10⁶ Ω/square).

Adapter for DEROS/PROS Sanders 1" Soft,1/Pkg

Soft Connector, connects the sander to the dust extractor hose Ø 27 mm. Electrical conductive (≤ 10⁶ Ω/square). Suitable for all Mirka® DEOS, Mirka® DEROS, Mirka® LEROS and Mirka® PROS machines. Also suitable for the Mirka® Decosander and the Dust Suction Hood, as well as sanders of most other brands. Not suitable for Mirka® OS, Mirka® ROS nor Mirka® CEROS.

Adapter for Vacuum Hose (1.1"/2.2"), 1/Pkg

Mirka Orbital Sander Hose Adapter

Adapter for Vacuum Hose/Coaxial 1.25" ID, 1/Pkg

Connector for air + electric hoses. Electrical conductive (≤ 10⁶ Ω/square). Comes with the following hoses: MIE6514511, MIE6514711, 8992514511, 8992514711 and 8992515011.

AOS Grease Gun for 130NV, 1/Pkg

A grease gun, to be used when lubricating the Mirka AOS 130NV sander. The use of grease to extend the life of the tool is recommended. For use in industrial applications in heavy usage it is recommended to grease once a day. In more average use, such as in ART body shops, once a week is enough. With this grease gun it is recommended to use Molybdenum Disulfide base grease. Information about the usage of the grease gun is available in the manual of the Mirka AOS 130NV sander.

Auxiliary Air Supply Kit for Smart Cart, 1/Pkg

Backing Pad 225mm 25H Grip LEROS + 8 screws

Backing pad 225mm designed for Mirka® LEROS 950CV. This backing pad is endowed with both grips and screws, for maximal attachment of the interface. Recommended to be used together with an interface (MIW9534611) and best combined with Abranet net sanding abrasive for a smooth and fast surface finish.

Backing Plate for DEOS 3x5", 1/Pkg

Backup Pad 1.25" Grip Soft Twist Lock, 10/Pkg

Backup Pad 1.25" Grip, 10/Pkg

1-1/4" Grip Faced Backup Pad

Backup Pad 1.25" PSA Hard Twist Lock, 10/Pkg

Backup Pad 1.25" PSA Soft Quick Lock CPD, 10/Pkg

Backing Pad Quick Lock 32mm PSA Soft CPD. Suitable for Mirka® ROS 150NV, Mirka® AOS 130NV, Mirka® AOS-B 130NV and Mirka® AROS-B 150NV sanders

Backup Pad 1.25" PSA Soft Twist Lock, 10/Pkg

Backup Pad 1.25" PSA Soft, 5/Pkg

Backup Pad 1.25" PSA, 10/Pkg

1-1/4" Vinyl Faced Backup Pad

Backup Pad 2.875" Grip, 1/Pkg

2-7/8" Grip Faced Backup Pad

Backup Pad 3" Grip MH with Adapters, 1/Pkg

Backup Pad 3" Grip MH, 1/Pkg

3" Grip Faced Abranet Vacuum Pad

Backup Pad 3" Grip, 1/Pkg

3" Grip Faced Backup Pad

Backup Pad 3"x4" Grip MH, 1/Pkg

Backup Pad 3"x4" PSA, 1/Pkg

Backup Pad 3"x5" Grip 46H (for DEOS 353), 1/Pkg

Backup Pad 3"x5" Grip 54H (for MR-35SGV), 1/Pkg

Backup Pad 3"x8" Grip 48H (for DEOS 383), 1/Pkg

Backup Pad 3"x8" Grip 56H, 1/Pkg

Backup Pad 3.5" Grip, 1/Pkg

3-1/2" Grip Faced Backup Pad

Backup Pad 3.5" PSA Heavy Duty, 1/Pkg

3-1/2" Heavy Duty Vinyl Faced Backup Pad

Backup Pad 3.5" PSA, 1/Pkg

3-1/2" Vinyl Faced Backup Pad

Backup Pad 4"x6"x6" Grip 32H Medium, 1/Pkg

Backing pad suitable for the Mirka® DEOS Delta sander.

Backup Pad 5" 5/16" PSA No-Hole Medium, 1/Pkg

Backup Pad 5" Grip 28H 130g, 1/Pkg

Backup Pad 5" Grip 28H Soft, 1/Pkg

A soft 125 mmm backing pad, especially suited for profile sanding and where a soft edge is needed.

Backup Pad 5" Grip 28H, 1/Pkg

Backup Pad 5" Grip 5H Soft, 1/Pkg

5" 5 Hole Grip Soft Faced Vacuum Backup Pad

Backup Pad 5" Grip 5H, 1/Pkg

5" 5 Hole Grip Faced Vacuum Backup Pad

Backup Pad 5" Grip Flexible Edge, 1/Pkg

Backup Pad 5" Grip Heavy Duty Palm Hook, 1/Pkg

Backup Pad 5" Grip MH Soft, 1/Pkg

5" Grip Soft Faced Abranet Vacuum Pad

Backup Pad 5" Grip MH, 1/Pkg

5" Multi-Hole Grip Faced Vacuum Backup Pad

Backup Pad 5" Grip MH, 1/Pkg

5" Grip Faced Abranet Vacuum Pad

Backup Pad 5" Grip Palm Hook, 1/Pkg

5" Grip Faced Backup Pad with "Palm" Hook

Backup Pad 5" Grip Soft, 1/Pkg

5" Grip Soft Faced Backup Pad

Backup Pad 5" Grip, 1/Pkg

5" Grip Faced Backup Pad

Backup Pad 5" Grip, 1/Pkg

Backup Pad 5" Grip, 1/Pkg

Backup Pad 5" PSA 5H, 1/Pkg

5" 5 Hole Vinyl Faced Vacuum Backup Pad

Backup Pad 5" PSA Flexible Edge, 1/Pkg

5" Vinyl Faced Backup Pad with Flexible Edge

Backup Pad 5" PSA Heavy Duty, 1/Pkg

5" Heavy Duty Vinyl Faced Backup Pad

Backup Pad 5" PSA Soft, 1/Pkg

5" Vinyl Soft Faced Backup Pad

Backup Pad 5" PSA, 1/Pkg

5" Vinyl Faced Backup Pad

Backup Pad 5" PSA, 1/Pkg

Backup Pad 6" 5/16" PSA No-Hole Medium, 1/Pkg

Backup Pad 6" 6H Grip, 1/Pkg

Backing pad medium for grip discs.

Backup Pad 6" Grip 16H, 1/Pkg

Abranet medium density Unipad 150 mm (6") for all hole combinations. This Abranet unipad is optimized for flat surfaces and has a high edge durability. 15 larger holes allow use of conventional discs with 6 h, 6 + 1 h, 9 h and 15 h. Suitable for narrow shroud machines but not recommended to be used with 150 mm ROS machines, because the combination of Unipad + wide/Abranet shroud machines does not give the optimal dust extraction. Delivered with one 150 mm (6") pad saver. To ensure correct installation, always use the supplied spacing washers, making sure that a minimum gap exists between the sander’s shroud and the top part of the backing pad, to prevent friction between the two parts. Tighten the screw hard. The backing pad should never turn idle. From time to time, check that the screw is well tight.

Backup Pad 6" Grip 48H 130g Soft, 1/Pkg

A soft 150 mmm backing pad, especially suited for profile sanding and where a soft edge is needed.

Backup Pad 6" Grip 48H 130g, 1/Pkg

Backup Pad 6" Grip 6H, 1/Pkg

Backup Pad 6" Grip 6H, 1/Pkg

Backup Pad 6" Grip 6H, 1/Pkg

6" 6 Hole Grip Faced Vacuum Backup Pad

Backup Pad 6" Grip Black J-Hook, 1/Pkg

6" Grip Faced Backup Pad

Backup Pad 6" Grip Flexible Edge, 1/Pkg

Backup Pad 6" Grip for Mirlon Discs, 1/Pkg

6" Grip Faced Pad for Mirlon Discs

Backup Pad 6" Grip MH Soft, 1/Pkg

6" Grip Soft Faced Abranet Vacuum Pad

Backup Pad 6" Grip MH, 1/Pkg

6" Grip Faced Abranet Vacuum Pad

Backup Pad 6" Grip Soft, 1/Pkg

Backup Pad 6" Grip, 1/Pkg

Backup Pad 6" PSA 6H, 1/Pkg

6" 6 Hole Vinyl Faced Vacuum Pad

Backup Pad 6" PSA Flexible Edge, 1/Pkg

6" Vinyl Faced Backup Pad with Flexible Edge

Backup Pad 6" PSA Soft, 1/Pkg

Backup Pad 6" PSA, 1/Pkg

6" Vinyl Faced Backup Pad

Backup Pad 6" PSA, 1/Pkg

6" Vinyl Faced Backup Pad

Backup Pad 7.875" Grip, 1/Pkg

7" Grip Backup Pad with 5/8 x 11 female thread

Backup Pad 8" Grip 6Mount, 1/Pkg

Backup Pad 8" Grip 89H, 1/Pkg

Backup Pad 8" Grip 8H, 1/Pkg

8" 8 Hole Grip Faced Vacuum Backup Pad

Backup Pad 8" Grip 8H, 1/Pkg

8" 8 Hole Grip Faced Vacuum Backup Pad

Backup Pad 8" Grip, 1/Pkg

8" Grip Faced Backup Pad

Backup Pad 8" PSA 5H Mount, 1/Pkg

8" Vinyl Faced Backup Pad

Backup Pad 8" PSA, 1/Pkg

8" Vinyl Faced Backup Pad

Bearing Housing for DEOS, 1/Pkg

Bearing Kit for DEOS, 1/Pkg

Black Cloth Tape 2"x164", 1/Roll

A strong and durable tape for protecting surrounding areas when sanding.

Black Power Tool Holder, 1/Pkg

Tool hook for Mirka® OS Mirka® CEROS/DEROS 125 mm, 150 mm Mirka® DEOS Suitable for the Work Station for DE 1230/1242. Is to be hooked on to the perforated panel.

Black V Power Tool Holder, 1/Pkg

Tool hook for Mirka® ROS Mirka® CEROS 77 mm Mirka® ROP2 77 mm, 125 mm Mirka® RP 300NV / AOS Mirka® CEROS /DEROS 125 mm, 150 mm Mirka® ROS/PROS 125mm, 150mm & 200mm Polishing machines Suitable for the Work Station for DE 1230/1242. Is to be hooked on to the perforated panel.

Brake Seal for DEROS 325/350, 1/Pkg

Brake Seal for LEROS, 1/Pkg

Carry Bag for LEROS, 1/Pkg

A practical, protective bag with carrying strap for the Mirka® LEROS wall sander. Frees your hands for carrying other accessories, such as the dust extractor. The bag protects the sander during transport and it includes storage space for abrasives and backing pads.

Caster 5" Brake Grey for Mirka Smart Cart, 1/Pkg

CEROS, IEC C13 US Power Cable 100-120V, 1/Pkg

Cleaning Cloth Microfiber 15.75x15.75" Grey, 2/Pkg

This grey colored cleaning cloth is gentle to the surface and leaves less scratch marks. It has a very good absorption capability and glides smoothly on the surface with very low friction.

Clean-up Kit for MV-912 Dust Extractor, 1/Pkg

A clean-up kit with a brush nozzle for dust extractors. The brush nozzle makes the kit more versatile. The hose is 4 m (Ø 32mm) and the length for the stainless steel tubes is 500 mm x 2.

Connector Air Inlet for Hand Block .75"/.75",1/Pkg

When fixed on a Mirka 20 mm dust extraction hose, this connector enables a quick and smooth change of the hose from one Mirka hand sanding block to another.

Cutoff Wheel Bulldog 3x.035x.375" A60TBXX, 5/Pkg

Cutoff Wheel Bulldog 3x.0625x.375" A60TBXX, 5/Pkg

Cutoff Wheel Premium 3"x .1875", 5/Pkg

Cutoff Wheel Royal 3"x.040"x.375" AS60SBXX, 5/Pkg

Cutoff Wheel Royal 3"x.0625"x.375" AS60SBXX, 5/Pkg

CV Exhaust Fit Kit 1" for CEROS, 1/Pkg

DC Cable Kit 13' for CEROS, 1/Pkg

DC Extension Cord 13' for CEROS, 1/Pkg

Mirka CEROS electric sander extension cord, 4m.

Denibbing Mini-File.79"x1.65" Fine/Coarse, 1/Pkg

Ergonomically-designed rectification tool to remove runs and dirt nibs. Two-sided file held in place via magnet. One side is coarse-cut, and the other is fine-cut.

DEOS 353/383 Housing, 1/Pkg

Dispenser for 5L POLARSHINE Container, 1/Pkg

Dispenser for Paint Cup Lids

Practical dispenser for paint cup lids.

Dispenser for Paint Cups, 180ml and 400ml

Practical dispenser for 180ml and 400ml paint cups.

Dispenser for Paint Cups, 650ml and 850ml

Practical dispenser for 650ml and 850ml paint cups.

Dry Guide Coat 100g Black, 1/Pkg

Black Dry Guide Coat used for light colour surfaces. Dry Guide Coat with excellent covering properties. The powder makes all imperfections and scratches visible. This unique applicator leaves an even powder coating. The applicator has flexible edges which makes it easy to use on contoured areas. A great tool in guiding the operator through the sanding process and achieving a perfect result

Dry Guide Coat 100g White, 1/Pkg

The Dry Guide Coat has excellent covering properties. The powder makes all imperfections and scratches visible. This unique applicator leaves an even powder coating. The applicator has flexible edges which makes it easy to use on contoured areas. This is a great tool in guiding the operator through the sanding process and achieving a perfect result. The white powder is used for dark colour surfaces.

Electric Sander Cord/Hose Straps, 6/Pkg

This hook and loop fastening strap kit enables attachment of the electrical cord to the vacuum hose.

Emblem Tape 2" x 11.8", 1/Roll

Clear Emblem Tape is designed specifically for re-fixing logos, decals, and badges from all types of vehicles. When the tape is applied, the pressure-sensitive adhesive self-cuts, only sticking to the badge.

Extension Shaft for LEROS 19.685", 1/Pkg

The extension shaft makes it easier to reach ceilings and high walls when sanding with the Mirka® LEROS wall sander. Just attach this 50cm long extension shaft to your LEROS and increase your reach considerably!

Fairing for LEROS, 1/Pkg

Felt Polishing Pad 3"x.25" Grip White, 2/Pkg

This flat hard white felt pad is designed for glass polishing applications. The thick felt pad construction has a good balance and provides a stable feeling during polishing. The pad is designed to be used in combination with Polarshine E3, which results in a good glass sanding process.

Felt Polishing Pad 5"x.25" Grip White, 2/Pkg

This flat hard white felt pad is designed for glass polishing applications. The thick felt pad construction has a good balance and provides a stable feeling during polishing. The pad is designed to be used in combination with Polarshine E3, which results in a good glass sanding process.

Finessing Damper 1.5"x1.5"x3"/2 oz (60ml), 1/Ea

For finessing operations with Polarstar SR3, SR5 or SR7 abrasives.This product dispenses quickly and neatly an appropriate amount of liquid to the surface. By using the finessing damper you'll get less excess splashing and wiping off and it helps to avoid skin contact with harmful liquids. Remember to clean the disc inbetween sanding operations, by gently running the disc against the damper head.

Flexi No Edge Blending Tape .59"x82", 1/Roll

A unique foam tape to mask around curves and curved panel edges. Gives a feathered paint edge and eliminates rework, saving a considerable amount of time and material.

Foam Core Poster for DEROS Display Cart, 1/Pkg

Foam Polishing Pad 3.25"x.875" Black, 5/Pkg

Foam Polishing Pad 3.25"x.875" Orange, 5/Pkg

3-1/4" Dia. x 1-1/4" CCS Orange Foam (Cutting)

Foam Polishing Pad 3.25"x1" Burgundy Waffle,20/Pkg

Mirka burgundy waffle pad is suitable for hard and medium hard coatings, providing a fast cut with good gloss. The burgundy foam is stronger than our yellow waffle foam providing a stable polishing process.

Foam Polishing Pad 3.25"x1" Yellow Waffle, 2/Pkg

A polishing pad with medium density hardness and waffle shape. The durable reticulated foam has an excellent elasticity. The waffle shape has an optimized pattern which improves the cutting performance and reduces the surface temperature during the polishing process. The pad is designed to be used in combination with Polarshine® Polishing Compounds, for both cutting with Polarshine® 15 and polishing with Polarshine® 10 and 8. The foam pad is suitable for all kinds of polishing processes: paintworks in ART, Marine and Wood sectors as well as Vehicle and Tier1.

Foam Polishing Pad 3.25"x1" Yellow Waffle, 20/Pkg

A polishing pad with medium density hardness and waffle shape. The durable reticulated foam has an excellent elasticity. The waffle shape has an optimized pattern which improves the cutting performance and reduces the surface temperature during the polishing process. The pad is designed to be used in combination with Polarshine® Polishing Compounds, for both cutting with Polarshine® 15 and polishing with Polarshine® 10 and 8. The foam pad is suitable for all kinds of polishing processes: paintworks in ART, Marine and Wood sectors as well as Vehicle and Tier1.

Foam Polishing Pad 3.625"x.5" Black, 6/Pkg

Foam Polishing Pad 3.625"x.5" Orange, 6/Pkg

Foam Polishing Pad 6" x 1" Black Flat, 2/Pkg

A reticulated flat foam pad for hologram removal gives an excellent finishing on both fresh and fully cured paint works. The good balance between elasticity and density in the foam contributes to the final result. The pad is designed to be used in combination with Polarshine® polishing compound VF5 and with Polarshine® 3 Antistatic wax.

Foam Polishing Pad 6" x 1" Orange Waffle, 2/Pkg

A reticulated foam has an excellent balance in elasticity and softness which remains during usage, and is available as waffle shape structured. The waffle shape has an optimised pattern which gives an improved cutting performance with long life and reduces the surface temperature during polishing. The orange foam is softer than our yellow foam and leaves a better gloss and less holograms. Well suitable for softer clear coats and paints to achieve a perfect finish in one step process for vehicle and Tier 1 applications. For wood high gloss the orange waffle pad is ideal for the second polishing step in order to get an increased gloss level and to remove holograms. The pad is especially well suited for darker colors or softer paints and lacquers. The pads are designed to be used for polishing in combination with Polarshine® polishing compounds 12, 10 and 8.

Foam Polishing Pad 6" x 1" Yellow Flat, 2/Pkg

A flat polishing pad with medium density hardness. The durable reticulated foam has an excellent elasticity. The pad is designed to be used in combination with Polarshine® Polishing Compounds, for both cutting with Polarshine® 15 and polishing with Polarshine® 10 and 8. The foam pad is suitable for all kinds of polishing processes: paintworks in ART, Marine and Wood sectors as well as Vehicle and Tier1.

Foam Polishing Pad 6" x 1" Yellow Waffle, 1/Pkg

A polishing pad with medium density hardness. The durable reticulated foam has an excellent elasticity. The pad is designed to be used in combination with Polarshine® Polishing Compounds, for both cutting with Polarshine® 15 and polishing with Polarshine® 10 and 8. The foam pad is suitable for all kinds of polishing processes: paintworks in ART, Marine and Wood sectors as well as Vehicle and Tier1.

Foam Polishing Pad 6"x1" Yellow Waffle, 2/Pkg

A polishing pad with medium density hardness and waffle shape. The durable reticulated foam has an excellent elasticity. The waffle shape has an optimized pattern which improves the cutting performance and reduces the surface temperature during the polishing process. The pad is designed to be used in combination with Polarshine® Polishing Compounds, for both cutting with Polarshine® 15 and polishing with Polarshine® 10 and 8. The foam pad is suitable for all kinds of polishing processes: paintworks in ART, Marine and Wood sectors as well as Vehicle and Tier1.

Foam Polishing Pad 8"x1.25" Black, 1/Pkg

Foam Polishing Pad 8"x1.25" Orange, 1/Pkg

Foam Polishing Pad 8"x1.25" White, 1/Pkg

8" Dia. x 1-1/4" CCS White Foam (Polishing)

Foam Polishing Pad 8"x1.25" Yellow Waffle, 2/Pkg

A polishing pad with medium density hardness and waffle shape. The durable reticulated foam has an excellent elasticity. The waffle shape has an optimized pattern which improves the cutting performance and reduces the surface temperature during the polishing process. The pad is designed to be used in combination with Polarshine® Polishing Compounds, for both cutting with Polarshine® 15 and polishing with Polarshine® 10 and 8. The foam pad is suitable for all kinds of polishing processes: paintworks in ART, Marine and Wood sectors as well as Vehicle and Tier1. The high-density traditional soft foam tape for sealing of all common bodywork gaps. Mirka’s soft foam tape has a high-quality adhesion that ensures safe adhesion even when repositioned. It is also easy to remove after use. The high-density soft foam gives flexible positioning in angels as well as a quick and proper sealing.

Foam Tape Premium .79"x164", 1/Roll

Foam tape Premium is a unique and efficient tape to mask car jambs. For use in all apertures, A, B and C posts. Shaped to give a precise fingertip adjustment and should be attached on moving parts. Supplied in one continuous roll that can easily be torn into the required length, and still retains its shape to rejoin. Once closed, the tape can still be adjusted into position. The offset adhesive avoids paint and clear coat coming into contact with the adhesive, thus allowing a feathered finish and preventing hard edges.

Grey Acrylic Double Sided Tape .24" x 59", 1/Roll

Double-Sided acrylic tape is a premium, reinforced acrylic, closed-cell foam tape, 1.1 mm. With a high-tack and a high-strength performance acrylic adhesive, it is ideal for internal and external fastening.

Grey Acrylic Double Sided Tape .47" x 59", 1/Roll

Double-Sided acrylic tape is a premium, reinforced acrylic, closed-cell foam tape, 1.1 mm. With a high-tack and a high-strength performance acrylic adhesive, it is ideal for internal and external fastening.

Grey Acrylic Double Sided Tape .87" x 59", 1/Roll

Double-Sided acrylic tape is a premium, reinforced acrylic, closed-cell foam tape, 1.1 mm. With a high-tack and a high-strength performance acrylic adhesive, it is ideal for internal and external fastening.

Grey Number Plate Tape .24" x 16.4", 1/Roll

The Grey Number Plate tape is a premium, reinforced acrylic, closed-cell foam tape, 1.1 mm. With a high-tack and a high-strength performance acrylic adhesive, it is ideal for internal and external fastening.

Hand Towel Rack for Mirka Smart Cart, 1/Pkg

Hand Towel rack for Solution Trolley

Handle left for LEROS, 1/Pkg

Handle right for LEROS, 1/Pkg

HEPA Filter Cover Kit for DE-1230, 1/Pkg

The HEPA Filter Cover for DE 1230/1242 is necessary to keep the HEPA filter (Mirkacode 8999100711) in place.

HEPA Filter Element for DE-1230, 1/Pkg

The HEPA (High Efficiency Particulate Air) filter can be installed in addition to the standard filter to improve the filtration. By adding this filter you will get a triple filtration: 1. Fleece dust bag 2. Standard main filter 3. HEPA filter. Please note that adding this filter will not make a dust extractor DE 1230 an H-class extractor, even though the filter itself fulfills HEPA class H13 requirements.

Hole Screw Kit for LEROS, 8/Pkg

This 5 m hose for Mirka hand sanding blocks can be connected to existing Mirka dust extraction hose assemblies. The hose is conductive, which leads the sparks from static electricity (common in hand sanding) to the grounded dust extractor. Electrical conductive (≤ 10⁶ Ω/square). A flexible suction hose connecting the sander and the dust extractor. Please note that this hose is conical. The conical dust extractor hose is designed to improve dust suction. Electrical conductive (≤ 10⁶ Ω/square).

Hose Arm for Solution Trolley Double Hoses, 1/Pkg

This product can be assembled onto the Mirka solution trolley and enables more convenient working. By using the hose arm the operator ensures that the hose comes from above and reduces the risk of the hose harming the workpiece.

Hose Connector for LEROS, 1/Pkg

This 10 m extension hose can be cut into the desired length and connected to the MIN6519411 hose. Note that the hose adapter 32/54 mm should be removed. The extension hose can not be connected to the Mirka sanders directly. The hose is cylindrical with the same diameter throughout the whole length of the hose.

Hose Rack Side for Mirka Smart Cart, 1/Pkg

Interface Pad 2.75"x5"x.375" 13H, 5/Pkg

The 7 mm thick interface strip is used in combination with hook & loop sanding strips for sanding rounded surfaces and contours. Using the interface strip will also produce a softer result. The Interface strip is placed between the backing pad and the sanding strip.

Interface Pad 2.75"x7.75"x.375" 56H, 5/Pkg

The 10 mm thick interface strip is used in combination with hook & loop sanding strips for sanding rounded surfaces and contours. Using the interface strip will also produce a softer result. The Interface strip is placed between the backing pad and the sanding strip.

Interface Pad 2.75x 5" Grip MH, 1/Pkg

Interface Pad 2.75x7.5", 1/Pkg

Interface Pad 2.875" Grip, 5/Pkg

Interface Pad 3" Grip, 5/Pkg

Interface Pad 3"x.2" Grip 6H, 5/Pkg

The 5 mm thick multi interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours, with Mirka's net products. Using the multi interface pad will also produce a softer result. The multi Interface pad is placed between the backing pad and the sanding disc.

Interface Pad 3"x4"x.28" Grip 33H, 5/Pkg

A flexible 7 mm thick interface pad, suitable for hand sanding or for orbital sanders. The interface pad is used in combination with grip sanding sheets for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding sheet.

Interface Pad 3"x5"x.28" 54H, 5/Pkg

A flexible 7 mm thick interface pad, suitable for hand sanding or for orbital sanders. The interface pad is used in combination with grip sanding sheets for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding sheet.

Interface Pad 4.875"x1" Grip 5H, 5/Pkg

Interface Pad 4.875"x1" Grip Multihole, 5/Pkg

Interface Pad 5" Grip MH, 1/Pkg

Interface Pad 5" x .275" Grip 5H, 5/Pkg

The 7 mm thick interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface Pad 5"x.2" Grip 44H, 5/Pkg

The 5 mm thick multi hole interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. The pad is developed to be used for light profile sanding, Paint Preparation sanding, Factory Primer (E-Coat) sanding and Top- and Clear Coat sanding. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface Pad 5"x.39" Grip 33H, 5/Pkg

The 10 mm thick multi hole interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface Pad 5"x.39" Grip 44H, 5/Pkg

The 10 mm thick multi interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours, with Mirka's net products. Using the multi interface pad will also produce a softer result. The multi Interface pad is placed between the backing pad and the sanding disc.

Interface Pad 6" Grip 6H, 5/Pkg

Interface Pad 6" Grip MH, 1/Pkg

Interface Pad 6" Grip, 5/Pkg

Interface Pad 6" x .275" Grip 15H, 5/Pkg

The 7 mm thick interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface Pad 6"x.2" Grip 67H, 5/Pkg

The 5 mm thick multi hole interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. The pad is developed to be used for light profile sanding, Paint Preparation sanding, Factory Primer (E-Coat) sanding and Top- and Clear Coat sanding. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface Pad 6"x.39" Grip 67H, 5/Pkg

The 10 mm thick multi interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours, with Mirka's net products. Using the multi interface pad will also produce a softer result. The multi Interface pad is placed between the backing pad and the sanding disc.

Interface Pad 8"x.28" 89H, 1/Pkg

This interface is suitable for use with 8" 200 mm 89 holes Net backing pad, 8295885111. The backing pad has been developed to be used with the 200 mm two-handed sander Mirka® ROS2 850CV. The 7 mm thick interface pad is used in combination with grip sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface Pad 9" 25H for Mirka LEROS, 1/Pkg

IRIDIUM Disc Kit, 1/Box

IRIDIUM Disc Trial Kit, 1/Box

IRIDIUM Roll Trial Kit

Joint Ring for LEROS, 1/Pkg

Joint Screw Kit for LEROS, 1/Pkg

Lambs Wool Pad 3"x.75", 12/Pkg

3" Dia. Lambs Wool

Lambs Wool Pad 3"x.75", 2/Pkg

Lambs Wool Pad 6"x.75", 2/Pkg

Mirka's basic natural wool pad is aimed for general purpose use, where the ratio of quality and price is in balance.

Lambs Wool Pad 7"x.75", 1/Pkg

Lambs Wool Pad 7.5"x.75", 2/Pkg

Mirka's basic natural wool pad is aimed for general purpose use, where the ratio of quality and price is in balance.

Lambswool Pad Pro 80mm Grip, 10/Pack

The pad is made of premium wool fibers. The wool fibers are optimized to keep the performance on a high level for demanding use. An excellent result is achieved when using the pad in combination with Mirka Polarshine® compounds 35, 15, 10 and 8. The pad is suitable for polishing all kinds of paintworks in ART, Marine and Wood sectors as well as OEM applications.

Lever 2.5mm for DEROS, 1/Pkg

Lever 5mm for DEROS, 1/Pkg

Perforated lifting tape to lift rubber trims and body side mouldings from surface and to protect trim during painting. Perforated for easy tear off, fast and effective masking. The perforation also improves flexibility for the tape to follow contours and tight curves.

Locker Key for Mirka Smart Cart, 1/Pkg

Masking Film Premium, 12' x 400' x14MIC, Blue

Masking Film Premium, 16' x 350' x14MIC, Blue

Masking Film Premium, 20' x 250' x14MIC, Blue

Masking Tape 100˚C White Line 18mmx50m, 48/Pack

Impregnated paper-based masking tape for general automotive applications. Natural rubber adhesive securing instant adhesion and clean removal. Suitable for both metallic and plastic surfaces and withstands 100°C oven use for 30 minutes.

Masking Tape 100˚C White Line 36mmx50m, 24/Pack

Impregnated paper-based masking tape for general automotive applications. Natural rubber adhesive securing instant adhesion and clean removal. Suitable for both metallic and plastic surfaces and withstands 100°C oven use for 30 minutes.

Masking Tape 100˚C White Line 48mmx50m, 24/Pack

Impregnated paper-based masking tape for general automotive applications. Natural rubber adhesive securing instant adhesion and clean removal. Suitable for both metallic and plastic surfaces and withstands 100°C oven use for 30 minutes.

Masking Tape 120°C Lime Line 18mmx50m, 48/Pack

Impregnated paper-based masking tape 120° for high-grade automotive masking applications. Suitable for both metallic and plastic surfaces and withstands 120°C oven use for 30 minutes. It is an easy-to-use masking tape with excellent conformability and an absolute residue-free removal. Solvent, thinner and water resistant. Suitable for IR-curing. Wet sanding water proof.

Masking Tape 120°C Lime Line 36mmx50m, 24/Pack

Impregnated paper-based masking tape 120° for high-grade automotive masking applications. Suitable for both metallic and plastic surfaces and withstands 120°C oven use for 30 minutes. It is an easy-to-use masking tape with excellent conformability and an absolute residue-free removal. Solvent, thinner and water resistant. Suitable for IR-curing. Wet sanding water proof.

Masking Tape 120°C Lime Line 48mmx50m, 18/Pack

Impregnated paper-based masking tape 120° for high-grade automotive masking applications. Suitable for both metallic and plastic surfaces and withstands 120°C oven use for 30 minutes. It is an easy-to-use masking tape with excellent conformability and an absolute residue-free removal. Solvent, thinner and water resistant. Suitable for IR-curing. Wet sanding water proof.

MINI FILE BELT NON-WOVEN .375"x13", COARSE, 10/Box

MINI FILE BELT NON-WOVEN .375"x13", MEDIUM, 10/Box

MINI FILE BELT NON-WOVEN .5" x 18", COARSE, 10/Box

MINI FILE BELT NON-WOVEN .5" x 18", MEDIUM, 10/Box

Mirka Apron, 1/Pkg

Mirka Bulldog Counter Stool, 2-Ring Swivel, 1/Pkg

Mirka Case T-LOC 15.7 x 11.8 x 6.2", 1/Pkg

Splash and dust resistant case: a sturdy storage solution that is easy to pack and move to the next work site. The case protects the tool and prolongs its lifetime. The connectable case system keeps tools and equipment organized and in one place. Hight 158mm.

MIRKA Marine Refinishing Kit, 1/Box

Mirka Multi-Purpose Belt, 1/Pkg

A Multi-Purpose Belt to carry all you need to perform the cordless spot repair process. Easy-to-use and flexible with two pockets; the smaller pocket perfectly fits a cordless sander and the larger pocket can be used for accessories, such as microfibre cloths and a Polarshine bottle. The belt clips are covered with fabric. A support brace to more comfortably carry the Multi-Purpose Belt can be bought separately (8991199311).

Mirka Sleeve + Cable 110V + Hose 19.7' US, 1/Pkg

Preassembled 6m long hose with connector and cable in a durable sleeve. The sleeve makes handling easier and protects the work surface from scratches. Designed to be used with Mirka® DEROS, Mirka® DEOS and Mirka® LEROS. Electrical conductive (≤ 10⁶ Ω/square).

Mirka Sleeve + Cable 110V + Hose 32.8' US, 1/Pkg

Preassembled 10m long hose with connector and 110V cable in a durable sleeve. The sleeve makes handling easier and protects the work surface from scratches. Designed to be used with Mirka® DEROS, Mirka® DEOS and Mirka® LEROS. Electrical conductive (≤ 10⁶ Ω/square).

Mirka Squeegee, 6/Pkg

Mirka Wall Cabinet 31.375" x 25.75" x 12.5", 1/Pkg

MIW-EXTENSION. 1/Each

Motor Tool for Mirka Machines, 1/Pkg

Mounting Rack for 5L POLARSHINE Container, 1/Pkg

MUS-PI Sector Brochure, 1/Ea

Net Interface MIRLON 6", 2/Pkg

This unique interface provides great dust extraction when sanding with Mirka non-vowen products. The interface removes the need to use velour on a non-vowen product and thereby enables usage of both Mirlon and Mirlon Total, as discs or sheets when doing tool-sanding.The unique construction is based on a patented spacer backing.

Orange Fine Line Tape .12" x 108", 1/Roll

Orange Fine Line Tape is thinner and more translucent than other Fine Line Tapes making it ideal for seeing through to the painted surface. It is perfect for straight lines while also being highly flexible.

Orange Fine Line Tape .24" x 108", 1/Roll

Orange Fine Line Tape is thinner and more translucent than other Fine Line Tapes making it ideal for seeing through to the painted surface. It is perfect for straight lines while also being highly flexible.

Orange Fine Line Tape .47" x 108", 1/Roll

Orange Fine Line Tape is thinner and more translucent than other Fine Line Tapes making it ideal for seeing through to the painted surface. It is perfect for straight lines while also being highly flexible.

Outer Cup with Collar for PCS 180ml, 2/Pack

Outer Cup with Collar for PCS 400ml, 2/Pack

Outer Cup with Collar for PCS 650ml, 2/Pack

Outer Cup with Collar for PCS 850ml, 2/Pack

Overall Mirka, Extra Extra Large, 1/Pkg

Overall Mirka, Extra Large, 1/Pkg

Overall Mirka, Large, 1/Pkg

Pad Protector 2.75"x7.75" Grip 56H, 5/Pkg

Pad saver for 70x198mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding strips, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Protector 3"x.12" Grip 6H, 5/Pkg

The pad saver disc is designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with Mirka's net products. This cost effective pad saver disc, placed between the backing pad and the sanding disc, should be changed regularly. The pad saver disc prolongs the life of the backing pad.

Pad Protector 5"x.12" Grip 33H, 5/Pkg

Pad saver for 125mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Protector 5"x.12" Grip 44H, 5/Pkg

The pad saver disc is designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with Mirka's net products. This cost effective pad saver disc, placed between the backing pad and the sanding disc, should be changed regulary. The pad saver disc prolongs the life of the backing pad.

Pad Protector 6"x.12" Grip 67H, 5/Pkg

The pad saver disc is designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with Mirka's net products. This cost effective pad saver disc, placed between the backing pad and the sanding disc, should be changed regulary. The pad saver disc prolongs the life of the backing pad.

Pad Protector 8"x.12" Grip 89H, 3/Pkg

The pad saver disc is designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with Mirka's net products. This cost effective pad saver disc, placed between the backing pad and the sanding disc, should be changed regulary. The pad saver disc prolongs the life of the backing pad.

Pad Saver 3"x5" Grip 54H, 5/Pkg

The pad saver strip is designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with Mirka's net products. This cost effective pad saver strip, placed between the backing pad and the sanding strip, should be changed regulary. The pad saver strip prolongs the life of the backing pad.

Pad Saver 3x4" Grip 33H, 5/Pkg

Pad Saver 4x6x6" 32H, 5/Pkg

Pad saver suitable for the Mirka® DEOS Delta. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 5" Grip, 2/Pkg

Pad Saver 6" Grip, 2/Pkg

Pad Saver 9" 25H for Mirka LEROS, 1/Pkg

Pad saver suitable for the Mirka LEROS. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.

Paint Cup System 180ml, Filter Lid 125µm, 50/Pack

The Mirka® Paint cup system is a complete paint cup system, ready to be attached to the spray gun (spray gun adapter to be bought separately). The set includes 50 liners and lids with a 125µm filter, 20 stoppers, one outer hard cup and one collar. All parts are corrosion-resistant to both paint and thinner.

Paint Cup System 180ml, Filter Lid 190µm, 50/Pack

The Mirka® Paint cup system is a complete paint cup system, ready to be attached to the spray gun (spray gun adapter to be bought separately). The set includes 50 liners and lids with a 190µm filter, 20 stoppers, one outer hard cup and one collar. All parts are corrosion-resistant to both paint and thinner.

Paint Cup System 400ml, Filter Lid 125µm, 50/Pack

The Mirka® Paint cup system is a complete paint cup system, ready to be attached to the spray gun (spray gun adapter to be bought separately). The set includes 50 liners and lids with a 125µm filter, 20 stoppers, one outer hard cup and one collar. All parts are corrosion-resistant to both paint and thinner.

Paint Cup System 400ml, Filter Lid 190µm, 50/Pack

The Mirka® Paint cup system is a complete paint cup system, ready to be attached to the spray gun (spray gun adapter to be bought separately). The set includes 50 liners and lids with a 190µm filter, 20 stoppers, one outer hard cup and one collar. All parts are corrosion-resistant to both paint and thinner.

Paint Cup System 650ml, Filter Lid 125µm, 50/Pack

The Mirka® Paint cup system is a complete paint cup system, ready to be attached to the spray gun (spray gun adapter to be bought separately). The set includes 50 liners and lids with a 125µm filter, 20 stoppers, one outer hard cup and one collar. All parts are corrosion-resistant to both paint and thinner.

Paint Cup System 650ml, Filter Lid 190µm, 50/Pack

The Mirka® Paint cup system is a complete paint cup system, ready to be attached to the spray gun (spray gun adapter to be bought separately). The set includes 50 liners and lids with a 190µm filter, 20 stoppers, one outer hard cup and one collar. All parts are corrosion-resistant to both paint and thinner.

Paint Cup System 850ml, Filter Lid 125µm, 50/Pack

The Mirka® Paint cup system is a complete paint cup system, ready to be attached to the spray gun (spray gun adapter to be bought separately). The set includes 50 liners and lids with a 125µm filter, 20 stoppers, one outer hard cup and one collar. All parts are corrosion-resistant to both paint and thinner.

Paint Cup System 850ml, Filter Lid 190µm, 50/Pack

The Mirka® Paint cup system is a complete paint cup system, ready to be attached to the spray gun (spray gun adapter to be bought separately). The set includes 50 liners and lids with a 190µm filter, 20 stoppers, one outer hard cup and one collar. All parts are corrosion-resistant to both paint and thinner.

Paint Cup System UV 400ml, Filter Lid 125µm, 50/Pa

The Mirka® Paint cup system is a complete paint cup system, ready to be attached to the spray gun (spray gun adapter to be bought separately). This paint cup system, with the black liner and lid, is UV-resistant. The set includes 50 liners and lids with a 125µm filter, 20 stoppers, one outer hard cup and one collar. All parts are corrosion-resistant to both paint and thinner.

Paint Cup System UV 650ml, Filter Lid 125µm, 50/Pa

The Mirka® Paint cup system is a complete paint cup system, ready to be attached to the spray gun (spray gun adapter to be bought separately). This paint cup system, with the black liner and lid, is UV-resistant. The set includes 50 liners and lids with a 125µm filter, 20 stoppers, one outer hard cup and one collar. All parts are corrosion-resistant to both paint and thinner.

PCS Spray Gun Adapter 1

Adapter in stainless steel for connecting the paint cup system to the spray gun. All parts of the adapter are corrosion-resistant to both paint and thinner.

PCS Spray Gun Adapter 10

Adapter in stainless steel for connecting the paint cup system to the spray gun. All parts of the adapter are corrosion-resistant to both paint and thinner.

PCS Spray Gun Adapter 11

Adapter in stainless steel for connecting the paint cup system to the spray gun. All parts of the adapter are corrosion-resistant to both paint and thinner.

PCS Spray Gun Adapter 12

Adapter in stainless steel for connecting the paint cup system to the spray gun. All parts of the adapter are corrosion-resistant to both paint and thinner.

PCS Spray Gun Adapter 13

Adapter in stainless steel for connecting the paint cup system to the spray gun. All parts of the adapter are corrosion-resistant to both paint and thinner.

PCS Spray Gun Adapter 14

Adapter in stainless steel for connecting the paint cup system to the spray gun. All parts of the adapter are corrosion-resistant to both paint and thinner.

PCS Spray Gun Adapter 15

Adapter in stainless steel for connecting the paint cup system to the spray gun. All parts of the adapter are corrosion-resistant to both paint and thinner.

PCS Spray Gun Adapter 16

Adapter in stainless steel for connecting the paint cup system to the spray gun. All parts of the adapter are corrosion-resistant to both paint and thinner.

PCS Spray Gun Adapter 17

Adapter in stainless steel for connecting the paint cup system to the spray gun. All parts of the adapter are corrosion-resistant to both paint and thinner.

PCS Spray Gun Adapter 18

Adapter in stainless steel for connecting the paint cup system to the spray gun. All parts of the adapter are corrosion-resistant to both paint and thinner.

PCS Spray Gun Adapter 19

Adapter in stainless steel for connecting the paint cup system to the spray gun. All parts of the adapter are corrosion-resistant to both paint and thinner.

PCS Spray Gun Adapter 2

Adapter in stainless steel for connecting the paint cup system to the spray gun. All parts of the adapter are corrosion-resistant to both paint and thinner.

PCS Spray Gun Adapter 3

Adapter in stainless steel for connecting the paint cup system to the spray gun. All parts of the adapter are corrosion-resistant to both paint and thinner.

PCS Spray Gun Adapter 3S

PCS Spray Gun Adapter 4

Adapter in stainless steel for connecting the paint cup system to the spray gun. All parts of the adapter are corrosion-resistant to both paint and thinner.

PCS Spray Gun Adapter 5

Adapter in stainless steel for connecting the paint cup system to the spray gun. All parts of the adapter are corrosion-resistant to both paint and thinner.

PCS Spray Gun Adapter 6

Adapter in stainless steel for connecting the paint cup system to the spray gun. All parts of the adapter are corrosion-resistant to both paint and thinner.

PCS Spray Gun Adapter 7

Adapter in stainless steel for connecting the paint cup system to the spray gun. All parts of the adapter are corrosion-resistant to both paint and thinner.

PCS Spray Gun Adapter 7M

Adapter in stainless steel for connecting the paint cup system to the spray gun. All parts of the adapter are corrosion-resistant to both paint and thinner.

PCS Spray Gun Adapter 9

Adapter in stainless steel for connecting the paint cup system to the spray gun. All parts of the adapter are corrosion-resistant to both paint and thinner.

PCS Spray Gun Adapter E

Adapter in stainless steel for connecting the paint cup system to the spray gun. All parts of the adapter are corrosion-resistant to both paint and thinner.

Polishing Pad 6" PSA Flexible Edge, 1/Pkg

Polishing Pad Adapter.625"x1", 1/Pkg

5/8 x 11 female to male adapter for double sided buffing pads

Power Supply for CEROS, 1/Pkg

Power Tool/Hose Rack Back Mirka Smart Cart, 1/Pkg

PROS Extension Connector NPT 1/4"-18, 1/Pkg

This extension connector for the air inlet enables the use of larger couplings which does not fit our Mirka PROS sanders today. This extension connector is suitable for Mirka PROS sanders with newer serial number (3221xxxxxxxx and higher).

PROS Hose 5.9' MPP9023, 1/Pkg

1,8m long dust suction hose and pneumatic cable. Suitable for Mirka PROS 550DB and 650DB. (Mirka code: 8995550211 and 8995650211)

PROS/DEROS MPP0321 5"/6" Brake Seal, 1/Pkg

PROS/ROS Pad Wrench .94"(24mm), 1/Pkg

Pushlock Washer 10mm for DEOS, 1/Pkg

Quick Connector 1" Soft, 1/Pkg

A Soft Quick connector that enables a quick and easy change of tool to the vacuum hose. Suitable for all models of Mirka® DEROS, DEOS, LEROS and PROS. Please note that this quick connector is without swivel function and therefore is not suitable for the DecoSander.

QUICK DISCONNECT PAD ADAPTER, 1/Pkg

Quick Lock Kit for AP 300 NV Polisher, 1/Pkg

REMINT Polish Pad 3.15" PSA W/Liner Step 2, 20/Pkg

Polishing pad, 80mm with PSA, to be used together with the Remint™ polishing compound for the second step of final polishing to achieve gloss after scratch removal from chemically strengthened glass.

REMINT Polishing Pad 3" Grip Step 1, 5/Pkg

Polishing pad, 77mm with grip backing, to be used together with the Remint™ polishing compound for the first step of polishing to achieve gloss after scratch removal from chemically strengthened glass.

Rewireable Connector HP-9R US, 1/Pkg

Rewireable Mains Cable 4,3m 110V DEROS/DEOS, 1/Pkg

Screw Kit Motor for LEROS, 1/Pkg

Screws M8x20mm for Mirka Smart Cart, 37/Pkg

Seal for DEOS 353/383, 1/Pkg

Shark Blade 2" x 1", 1/Pkg

A professional precision tool for removal of minor lacquer defects like dust enclosures and runs.

Shelf for Mirka Smart Cart, 1/Pkg

Shelf for Solution Trolley

Sleeve for Hose and Cable 11.5' (3.8m), 1/Pkg

A durable 3.8m long sleeve for cable and hose, that makes handling easier and protects the work surface from scratches. Designed to be used with Mirka® DEROS, Mirka® DEOS and Mirka® LEROS standard hose (MIN6519411) and the 4.3 m cable.

Spacer for DEOS, 20/Pkg

SPLIT Masking Tape 3"x65.6", 1/Roll

Highly versatile DUO masking tape to mask rubber seals around the vehicle, protecting the inside from overspray, as well as for protection when spraying individual panels. Speeds up the masking and decreases the amount of masking products. Perforated sections makes it easy to tear.

Sponge 1-Sided 4.5"x5.5"x.1875" P100, 20/Box

Sponge 1-Sided 4.5"x5.5"x.1875" P100, 250/Box

Sponge 1-Sided 4.5"x5.5"x.1875" P120, 250/Box

Sponge 1-Sided 4.5"x5.5"x.1875" P150, 20/Box

Sponge 1-Sided 4.5"x5.5"x.1875" P150, 250/Box

Sponge 1-Sided 4.5"x5.5"x.1875" P180, 20/Box

Sponge 1-Sided 4.5"x5.5"x.1875" P180, 250/Box

Sponge 1-Sided 4.5"x5.5"x.1875" P220, 20/Box

Sanding sponge for wood, paint, metal, glass fiber, coatings and composites. Both dry and wet sanding.

Sponge 1-Sided 4.5"x5.5"x.1875" P220, 250/Box

Sponge 1-Sided 4.5"x5.5"x.1875" P320, 20/Box

Sponge 1-Sided 4.5"x5.5"x.1875" P320, 250/Box

Sponge 1-Sided 4.5"x5.5"x.1875" P400, 20/Box

Sanding sponge for wood, paint, metal, glass fiber, coatings and composites. Both dry and wet sanding.

Sponge 1-Sided 4.5"x5.5"x.1875" P400, 250/Box

Sponge 1-Sided 4.5"x5.5"x.1875" P60, 20/Box

Sanding sponge for wood, paint, metal, glass fiber, coatings and composites. Both dry and wet sanding.

Sponge 1-Sided 4.5"x5.5"x.1875" P60, 250/Box

Sponge 1-Sided 4.5"x5.5"x.1875" P600, 20/Box

Sanding sponge for wood, paint, metal, glass fiber, coatings and composites. Both dry and wet sanding.

Sponge 1-Sided 4.5"x5.5"x.1875" P600, 250/Box

Sponge 2-Sided 4.75"x3.75"x.50" P100, 10/Pkg

Sponge 2-Sided 4.75"x3.75"x.50" P100, 100/Box

Flexible sanding sponge for versatile sanding. Grit 100 (fine) for sanding profiled and rounded surfaces.

Sponge 2-Sided 4.75"x3.75"x.50" P120, 10/Pkg

Sponge 2-Sided 4.75"x3.75"x.50" P150, 10/Pkg

Sponge 2-Sided 4.75"x3.75"x.50" P150, 100/Box

Sponge 2-Sided 4.75"x3.75"x.50" P180, 10/Pkg

Sponge 2-Sided 4.75"x3.75"x.50" P180, 100/Box

Sanding sponge with a soft foam plastic core, grains on two sides. Used for sanding profiled and rounded surfaces.

Sponge 2-Sided 4.75"x3.75"x.50" P220, 10/Pkg

Sponge 2-Sided 4.75"x3.75"x.50" P220, 100/Box

Sanding sponge with a soft foam plastic core, grains on two sides. Used for sanding profiled and rounded surfaces.

Sponge 2-Sided 4.75"x3.75"x.50" P320, 10/Pkg

Sponge 2-Sided 4.75"x3.75"x.50" P320, 10/Pkg

Sponge 2-Sided 4.75"x3.75"x.50" P320, 100/Box

Sponge 2-Sided 4.75"x3.75"x.50" P400, 10/Pkg

Sponge 2-Sided 4.75"x3.75"x.50" P400, 10/Pkg

Sponge 2-Sided 4.75"x3.75"x.50" P400, 100/Box

Sponge 2-Sided Blue 4"x5"x .5" P150, 250/Box

Sponge 2-Sided Brown 4"x5"x .5" P320, 250/Box

Sponge 2-Sided Clear 4"x5"x .5" P280, 250/Box

Sponge 2-Sided Green 4"x5"x .5" P220, 250/Box

Sponge 2-Sided Purple 4"x5"x .5" P100, 250/Box

Sponge 2-Sided Red 4"x5"x .5" P180, 250/Box

Sponge 3" x 4" x .50" Grip P100, 100/Box

Sponge 3" x 4" x .50" Grip P150, 100/Box

Sponge 3" x 4" x .50" Grip P180, 100/Box

Sponge 3" x 4" x .50" Grip P220, 100/Box

Sponge 3" x 4" x .50" Grip P36, 100/Box

Sponge 3" x 4" x .50" Grip P60, 100/Box

Sponge 4-Sided 4"x2.75"x1" P100, 10/Pkg

Sponge 4-Sided 4"x2.75"x1" P100, 100/Box

Sanding sponge with a hard foam plastic core, entire surface coated with grains. Suitable for sanding 90 degree angles. Waterproof.

Sponge 4-Sided 4"x2.75"x1" P150, 10/Pkg

Sponge 4-Sided 4"x2.75"x1" P150, 100/Box

Sponge 4-Sided 4"x2.75"x1" P180, 10/Pkg

Sponge 4-Sided 4"x2.75"x1" P180, 100/Box

Sanding sponge with a hard foam plastic core, entire surface coated with grains. Suitable for sanding 90 degree angles. Waterproof.

Sponge 4-Sided 4"x2.75"x1" P180, 4/Pkg

Sponge 4-Sided 4"x2.75"x1" P220, 10/Pkg

Sponge 4-Sided 4"x2.75"x1" P220, 100/Box

Sponge 4-Sided 4"x2.75"x1" P280, 100/Box

Sponge 4-Sided 4"x2.75"x1" P60, 10/Pkg

Sponge 4-Sided 4"x2.75"x1" P60, 100/Box

Sponge HD 3" x 4" x .2" Grip P100 Purple, 100/Box

Sponge HD 3" x 4" x .2" Grip P150 Blue, 100/Box

Sponge HD 3" x 4" x .2" Grip P180 Red, 100/Box

Sponge HD 3" x 4" x .2" Grip P220 Green, 100/Box

Sponge HD 3" x 4" x .2" Grip P280 Clear. 100/Box

Sponge HD 3" x 4" x .2" Grip P320 Brown, 100/Box

Sponge HD 3" x 4" x .2" Grip P36, 100/Box

Sponge HD 3" x 4" x .2" Grip P60, 100/Box

Sponge HD 3" x 4" x .2" Grip P80, 100/Box

Sponge HD 3" x 4" x .4" Grip P100 Purple, 100/Box

Sponge HD 3" x 4" x .4" Grip P150 Blue, 100/Box

Sponge HD 3" x 4" x .4" Grip P180 Red, 100/Box

Sponge HD 3" x 4" x .4" Grip P220 Green, 100/Box

Sponge HD 3" x 4" x .4" Grip P280 Clear, 100/Box

Sponge HD 3" x 4" x .4" Grip P320 Brown, 100/Box

Sponge HD 3" x 4" x .4" Grip P36, 100/Box

Sponge HD 3" x 4" x .4" Grip P60, 100/Box

Sponge HD 3" x 4" x .4" Grip P80, 100/Box

Sponge LD 3" x 4" x .5" Grip P280 Clear, 100/Box

Sponge LD 3" x 4" x .5" Grip P320 Brown, 100/Box

Sponge LD 3" x 4" x .5" Grip P80, 100/Box

Store Rack Hooks W/Price Tags, 20/Pkg

This hook including a price tag is specially designed for the black Store rack 90x180 cm, code: BM9190114001. The hooks and price tags are delivered as 20 pcs per package.

Store Rack Plain T-Shape 35x71"+Sign, v2.0, 1/Pkg

Store Rack Shelf 17.7" x 8.7", 1/Pkg

This shelf is specially designed for the black Store rack 90x180 cm, code: BM9190114001.

Store Rack Shelf 35.5" x 8.7", 1/Pkg

This shelf is specially designed for the black Store rack 90x180 cm, code: BM9190114001.

Store Rack Tool Holder for Wall Sander, 1/Pkg

This tool holder for a wall sander is specially designed for the black Store rack 90x180 cm, code: BM9190114001.

SUPERSEDED BY MIE6515611US

Dust extraction hose with integrated electric cable. The hose is suitable for Mirka® DEROS amd Mirka® DEOS US-plug versions. The extended length, 10 m, gives more possibilities for movability.

SUPERSEDED BY MIE6515711US

Dust extraction hose with integrated electric cable. The hose is suitable for Mirka® DEROS and Mirka® DEOS US-plug versions. The extended length, 5,5m (18'), ensures better movability.

SUPERSEDED BY MIE9011111US

SUPERSEDED BY MIW9514312

Support Leg Front for Mirka Smart Cart, 1/Pkg

Swivel Exhaust for DEROS 125/150mm, 1/Pkg

Swivel Exhaust for DEROS 325/350, 1/Pkg

Swivel Exhaust Kit for DEOS 353/383, 1/Pkg

Swivel Exhaust Kit for DEOS 663/343, 1/Pkg

Tool Rack Screw Dist 24" 3U1V Smart Cart, 1/Pkg

Twisted Wool Pad 3"x1", 12/Pkg

3" Dia. 3/4" Twisted Wool (Cutting)

Twisted Wool Pad 6" Yellow, 1/Pkg

Twisted Wool Pad 6"x1", 1/Pkg

Twisted wool pad 6" (150 mm)

Twisted Wool Pad 7.5"x1" Yellow, 1/Pkg

Twisted Wool Pad 7.5"x1", 1/Pkg

7-1/2" Dia. 1" Twisted Wool (Cutting)

Twisted Wool Pad 7.5"x1.5" Yellow, 1/Pkg

Twisted Wool Pad 7.5"x1.5", 1/Pkg

Twisted Wool Pad 8"x1" Double Sided, 1/Pkg

A flexible dust suction hose connecting the sander and the dust extractor. Please note that this hose is conical. The conical dust suction hose is designed to improve dust suction. Electrical conductive (≤ 10⁶ Ω/square).

Vacuum Hose Adapter 1.25"/2.12", 1/Pkg

Hose adapter Ø 32/54 mm for Mirka dust extractors. The adapter connects the hose into the dust extractor. Electrical conductive (≤ 10⁶ Ω/square). Delivered together with the following hoses: MIE6514511 / MIE6514511US, MIE6514711 / MIE6514711US,MIN6519411, MIN6519711, 8992514511, 8992514711 and 8992515011.

Vacuum Hose Coupling 1.25"/1.25", 1/Pkg

Hose connector with diameter 32/32 mm. Delivered together with extension hose MIN6519711. Enables connection with the hose MIN6519411. Electrical conductive (≤ 10⁶ Ω/square).

Vacuum Hose Swivel Adapter .75"/.75", 1/Pkg

Hose swivel connector Ø 20/20 mm. Enables the connection of two hoses with the diameter 20 mm. This Pneumatic Hose Assembly is ergonomic with a weight of just 1850 grams. It is very flexible and fully conductive. This hose can be directly connected to all our pneumatic CV machines. Electrical conductive (≤ 10⁶ Ω/square). This Pneumatic Hose Assembly is 10m long, and can be directly connected to all our pneumatic CV machines. Electrical conductive (≤ 10⁶ Ω/square).

Waste Bin and Rack for Mirka Smart Cart, 1/Pkg

Removable waste bin with handle for easy and direct waste disposal.

Wheel 5" Black for Mirka Smart Cart, 1/Pkg

Wheel 6.3" Grey, for Mirka Smart Cart, 1/Pkg

Work Station for DE-1230, 1/Pkg

The work station for Mirka Dust Extractor 1230 is a compact shelf and hook system. The functional work station has dedicated space for Mirka cases and abrasives as well as hooks for machines and hose storage. The work station should be fastened to the dust extractor with the case fastening accessory for DE 1230, that needs to be ordered separately. Note that pneumatic machines also need the Pneumatic Box for DE 1230.

Work Station Shelf for DE-1230, 1/Pkg

The shelf for the work station for Mirka Dust Extractor 1230 is ideal for storage.

Yellow Power Tool Holder, 1/Pkg

This tool holder is specially designed for the black Store rack 90x180 cm, code: BM9190114001.