Adjusting Arm kit MPP8018 for PBS 13, 1/Pkg

Air Flow Cover Kit for DE-1230, 1/Pkg

AOS Bevel Pinion for 130NV, 1/Pkg

AOS Boot and Clamp Kit for 130NV, 1/Pkg

AOS Grip for 130NV, 1/Pkg

AOS Muffler and O-Ring Kit for 130NV, 1/Pkg

AOS Rear End Plate for 130NV, 1/Pkg

AOS Rotor for 130NV, 1/Pkg

AOS Screw Kit for 130NV, 1/Pkg

AOS Spindle Bearing Assembly for 130NV, 1/Pkg

Backing Pad 3x4" Grip 29H Medium (for DEOS343)

Backing Plate for DEOS 3x5", 1/Pkg

Backup Pad 1.25" Grip Soft Twist Lock, 10/Pkg

Backup Pad 1.25" PSA Hard Twist Lock, 10/Pkg

Backup Pad 1.25" PSA Soft Twist Lock, 10/Pkg

Backup Pad 1.25" PSA Soft, 5/Pkg

Backup Pad 3"x5" Grip 46H (for DEOS 353), 1/Pkg

Backup Pad 3"x5" Grip 54H (for MR-35SGV), 1/Pkg

Backup Pad 3"x8" Grip 48H (for DEOS 383), 1/Pkg

Backup Pad 3"x8" Grip 56H, 1/Pkg

Backup Pad 4"x6"x6" Grip 32H Medium, 1/Pkg

Backing pad suitable for the Mirka® DEOS Delta sander.

Backup Pad 5" Grip 28H 130g, 1/Pkg

Backup Pad 5" Grip 28H, 1/Pkg

Backup Pad 6" Grip 48H 130g, 1/Pkg

Backup Pad 8" Grip 89H, 1/Pkg

Backup Pad 9" 25H Grip LEROS + 8 screws

Backing pad 225mm designed for Mirka® LEROS 950CV. This backing pad is endowed with both grips and screws, for maximal attachment of the interface. Recommended to be used together with an interface (MIW9534611) and best combined with Abranet net sanding abrasive for a smooth and fast surface finish.

Battery Charger BCA 108 10.8V w/o power cord US

Bearing and Vanes Kit for 130NV, 1/Pkg

Bearing Dual Seal Kit for DEROS/PROS 5"/6", 1/Pkg

Bearing Housing for DEOS, 1/Pkg

Bearing Kit for DEOS, 1/Pkg

Brake Seal for DEROS 325/350, 1/Pkg

Brake Seal for LEROS, 1/Pkg

Container Clamp for DE-1230/1242, 1/Pkg

DEOS 353/383 Housing, 1/Pkg

Electronic Board 110-120V for DE-1230-PC, 1/Pkg

Fairing for LEROS, 1/Pkg

Handle Kit for DE-1230/1242, 1/Pkg

Handle left for LEROS, 1/Pkg

Handle right for LEROS, 1/Pkg

Hatch Door Frame kit for DE-1230, 1/Pkg

Hatch Door Upper Cover for DE-1230-PC, 1/Pkg

HEPA Filter Cover Kit for DE-1230, 1/Pkg

The HEPA Filter Cover for DE 1230/1242 is necessary to keep the HEPA filter (Mirkacode 8999100711) in place.

HEPA Filter Element for DE-1230, 1/Pkg

The HEPA (High Efficiency Particulate Air) filter can be installed in addition to the standard filter to improve the filtration. By adding this filter you will get a triple filtration: 1. Fleece dust bag 2. Standard main filter 3. HEPA filter. Please note that adding this filter will not make a dust extractor DE 1230 an H-class extractor, even though the filter itself fulfills HEPA class H13 requirements.

Hole Screw Kit for LEROS, 8/Pkg

Hose Connector for LEROS, 1/Pkg

Intelligent Battery BPA 10850 10.8V 5.0Ah, 1/Pkg

Interface Pad 9" 25H for Mirka LEROS, 1/Pkg

Joint Ring for LEROS, 1/Pkg

Joint Screw Kit for LEROS, 1/Pkg

Lever 5mm for DEROS, 1/Pkg

Mirka Case T-LOC 15.7 x 11.8 x 6.2", 1/Pkg

Splash and dust resistant case: a sturdy storage solution that is easy to pack and move to the next work site. The case protects the tool and prolongs its lifetime. The connectable case system keeps tools and equipment organized and in one place. Hight 158mm.

Motor Assembly for DE-1230 110V, 1/Pkg

O-Ring and Valve Spring Kit for AP and AOS, 1/Pkg

OS Mini Pad Support MPC0018, 1/Pkg

OS Pad Backing MPB0101, 1/Pkg

OS Screw Kit for Backing Pads MPA1672, 1/Pkg

OS353, OS383 Bearing Kit MPA0802, 1/Pkg

Pad Screw Kit for DEOS, 1/Pkg

PROS Air Inlet Kit, 1/Pkg

PROS Cover, 1/Pkg

PROS CV, DB Swivel Fitting Kit, 1/Pkg

PROS Endplate Bearing Kit, 1/Pkg

PROS Hose 5.9' MPP9023, 1/Pkg

1,8m long dust suction hose and pneumatic cable. Suitable for Mirka PROS 550DB and 650DB. (Mirka code: 8995550211 and 8995650211)

PROS Housing and Mark Plate Kit, 1/Pkg

PROS Muffler Kit 12,000 RPM, 1/Pkg

PROS Retainer+O-Ring Kit MPP9022, 1/Pkg

PROS Rotor Vanes & Key Kit, 1/Pkg

PROS Speed Valve Kit, 1/Pkg

PROS Spindle & Bearing Assembly, 1/Pkg

PROS/DEROS MPP0321 5"/6" Brake Seal, 1/Pkg

PROS/ROS Pad Wrench .94"(24mm), 1/Pkg

Pushlock Washer 10mm for DEOS, 1/Pkg

Quick Lock Kit for AP 300 NV Polisher, 1/Pkg

Rear Wheel 175 mm for DE-1230/1242, 1/Pkg

Replacement Cord 14' 110V US,Electric Tools, 1/Pkg

Replacement Cord 21' 110V US,Electric Tools, 1/Pkg

Replacement Cord 34' 110V US,Electric Tools, 1/Pkg

Rewireable Connector HP-9R US, 1/Pkg

ROS Air Inlet Kit MPA0798, 1/Pkg

ROS CV Swivel Fitting 1"(28mm) MPA0988, 1/Pkg

ROS Cylinder+O-Ring Kit MPA0994, 1/Pkg

ROS Endplate Bearing Kit MPA0799, 1/Pkg

ROS Exhaust Adapter MPC0108, 1/Pkg

ROS Housing MPA0244, 1/Pkg

ROS Lever Kit MPA0983 5,0/12000, 1/Pkg

ROS Lever Kit MPA0984 2.5/12000, 1/Pkg

ROS Lock Ring+O-Ring Kit MPA0993, 1/Pkg

ROS Muffler Kit MPA0797, 1/Pkg

ROS Muffler Kit MPA0805, 1/Pkg

ROS Retainer+O-Ring Kit MPA2551, 1/Pkg

ROS Rotor, Vanes and Key kit MPA0801, 1/Pkg

ROS SGV Retainer & O-Ring Kit MPA2697, 1/Pkg

ROS Speed Valve kit MPA0800, 1/Pkg

ROS Swivel Fitting Kit .75"(19mm) MPA0858, 1/Pkg

ROS Swivel Fitting Kit 1.1"(28mm) MPA0932, 1/Pkg

ROS Vac Adapter 1.4"/1.1"(36/29mm) MPB0065, 1/Pkg

ROS2 Air Inlet Kit MPA2216, 1/Pkg

ROS2 Rotor, Vanes & Key kit MPA2220, 1/Pkg

ROS2 Spindle Bearing Kit 5"/6" MPA2186, 1/Pkg

ROS2 Spindle MPB0208, 1/Pkg

ROS2 Vacuum Endcap Kit MPA2222, 1/Pkg

Rotary Knob Kit for DE-1230, 1/Pkg

Rotary Switch 16A for DE-1230, 1/Pkg

Rubber Mount for AOS-B, 1/Pkg

Screw Kit 5x18mm for DE-912/1230, 1/Pkg

Screw Kit Motor for LEROS, 1/Pkg

Seal for DEOS 353/383, 1/Pkg

Spacer for DEOS, 20/Pkg

Spindle Bearing Dual Seal Kit 5"/6", 1/Pkg

Spindle Bearing Dual Seal Kit CEROS/ROS 5"/6"

Spindle Bearing Kit for 3" sanders, 1/Pkg

Swivel Exhaust for DEROS 325/350, 1/Pkg

Swivel Exhaust Kit for DEOS 353/383, 1/Pkg

Swivel Exhaust Kit for DEOS 663/343, 1/Pkg

Top Cover for DE-1230/1242, 1/Pkg