AQUASTAR

AQUASTAR

 Aquastar, an innovative, patented, flexible film abrasive, is the ultimate and user–friendly choice with excellent touch and feel, for wet hand sanding applications. This product has a flexible plastic-based backing, and a pattern consisting of multiple abrasive zones surrounded by interconnected channels. Polypropylene (PP) is an excellent backing material due to its flexibility, durability and watertightness avoiding the need for pre-soaking of Aquastar before use. BASECUT

BASECUT

 Basecut is the economical, high efficiency choice for sanding with paper. There are several productivity and efficiency features, including a high initial, aggressive cut and a long working lifespan which makes it the cost effective choice. CARATFLEX

CARATFLEX

 A stearate coated abrasive for dry sanding applications, Carat Flex features fine stock removal, a uniformed scratch pattern, a long lifespan and extremely good grain adherence. The backing consists of a flexible, impregnated latex paper which is ideal for profile sanding. GOLD PROFLEX

GOLD PROFLEX

 Gold Proflex is a stearate coated abrasive paper for dry hand sanding of wood, fillers, paints and lacquers. The backing consists of a flexible, impregnated latex paper that provides desired flexibility and conformity in profile sanding operations as well as on flat surfaces. The paper has an anti-slip coating on the back side in order to provide good grip and feeling during the sanding. Gold Proflex has aluminium oxide grain, which provides a good cut and an excellent scratch pattern. GOLDFLEX SOFT

GOLDFLEX SOFT

 The soft and flexible Goldflex Soft has been developed for sanding profiled surfaces and irregular, difficult-to-reach details by hand. Goldflex Soft is especially useful within the automotive industry and the car repair branch. The foam base is grip friendly and applies pressure evenly, which reduces the risk of sanding through the surface. The special stearate coating prevents clogging. Suitable for both dry and wet sanding. HIOLIT F

HIOLIT F

 A flexible and durable sanding material aimed at metal and wood workshops, Hiolit F is particularly effective for sanding profiles, seams and other areas where flexibility and a high quality surface finish are required. Thanks to its special binding properties which prevents clogging, it's also suitable for sanding soft metals, such as copper, as well as for sanding between layers of paint on brass. HIOLIT XO

HIOLIT XO

 Hiolit XO is a semi-open stiff universal abrasive for belt sanding and other machine sanding where it has excellent edge wear resistance and durability. In particular, it produces high quality results on challenging materials – for example, grits 36–80 are suitable for aggressive sanding, such as severe rust damage, as well as other sanding operations where large amounts of material need to be removed. JEPUFLEX ANTISTATIC

JEPUFLEX ANTISTATIC

 A high-quality abrasive with a wide application area. The focus of the optimization work has been the sanding of hard wood such as beech, birch and oak. The strong antistatic paper provides dimensionally accurate and reliable wide belts. Full resin bonding and aluminium oxide grain guarantee a very durable product. The silicon carbide grain used in the coarsest grit gives extra strength to the product. These qualities together with a well adjusted coating density make Jepuflex Antistatic a genuine all round product that works well also on metal, plastic and lacquer. MIRLON

MIRLON

 Mirlon is a flexible, three-dimensional fibre sanding material that is easy to use on profiled surfaces and gives an excellent finish, thanks to its special structure. It’s ideal for matting of surfaces and creates an excellent base for the next lacquer layer. MIRLON TOTAL

MIRLON TOTAL

 Developed using Mirka's innovative Total Coating™ Technology, Mirlon Total is more aggressive than Mirlon and produces a dense scratch pattern and rapid result. Suitable for use in wet and dry modes, it features an open and flexible structure and strengthened fibers which make it strong and long-lasting. OSP

OSP

 As the name suggests, the Optimized Surface Preparation targets the entire process and this is a decisive factor. As well as maximizing the performance of every individual phase of the process, each step has also been optimized to work perfectly with all the other steps. Mirka’s OSP abrasives are clearly marked with numbers telling which disc or strip should be used for each step. Number 1 is used for paint removal, number 2 for feather edge, number 3 for preparing the repaired area for primer by reducing scratches and expanding the feather edge and number 4 for finalising the sanding. WPF

WPF

 WPF is the recommended product for manual wet sanding of plastics, lacquers and composite materials. The product features a latex-impregnated paper backing material and extra durable coating which helps produce a high quality finish, even on coarser surfaces. The range also includes small corrective sanding discs and roses used for spot repair. P3000 is available as corrective sanding discs only. WPF

WPF

 The recommended product for the manual wet sanding of plastics, lacquers and composite materials, Mirka WPF features a latex impregnated paper backing material and extra durable coating which helps produce a high quality finish, even on coarser surfaces.