About Mirka
Contact Us
Warranty Registration
Media
Literature
Manuals
Warranty
SDS
ISO Certificates
Careers
Sustainability
CONTENT
Abrasives
Products
Polish
Accessories
SpareParts
Solutions
ABRASIVES
POLISH
TOOLS
ACCESSORIES
Minisites
Support
ABRASIVES
By Substrate
Aluminum
Close
Menu
All By Name
By Form
Discs
Narrow belts
Rolls
Sheets
Strips
Triangles
By Application
Automotive Refinishing
Composite Processing
Do-It-Yourself
Industrial Roller Conditioning
Marine Industry
Metal Processing
Paint & Decoration
Vehicle Manufacturing
Wood Processing
By Substrate
AC laquer
Aluminum
Ash
Beech
Birch
Body filler
Cast iron
Chipboard
Clear Coat
Composites
Copper alloys / brass / bronze
Dupont Corian
Gel coat
Glass
Glass Fiber
Hard rubber
Hardwood
Karonia Mistral
L.G. Himacs
Lacquers
Mahogany
MDF / HDF
Melamine
Mild steel / carbon steel
Non-ferrous metal
Oak
Paint sanding
Paint stripping / removal
Pine
Plaster / Putty
Plastics
Polyester High Gloss
Polyurethane
Polyurethane High Gloss
Primer
Samsung Staron
Soft / Resinous wood
Soft ceramic
Soft rubber
Solid surface
Stainless steel
Steel
Synthetic materials
Teak
Top Coat
UV High Gloss
UV Primer
Veneer
Waterbased Primer
Waterbased Sealer
Waterbased UV sealer
Zinc
Net Sanding Range
ABRANET NC
Abranet NC has been developed for sanding of material that must not be contaminated with corrosive agents. The preparation of corrosion sensitive surfaces requires abrasive products which contain the lowest possible amount of heavy metals. Special procedures are applied throughout the production process of Abranet NC to reduce the metal content and ensure consistent quality. Due to the construction, Abranet NC has significantly lower heavy metal content than the corresponding traditional products. Abranet NC is suitable for sanding of aluminium and painted aluminium parts within the automotive industry.
ABRALON
Abralon is a unique, multifunctional sanding material developed for tackling both smooth and profiled surfaces. Its patented, flexible construction allows it to create a smooth sanding pattern on angled surfaces and edges while minimizing the risk of pressure marks. The flexible weave also allows water and air to pass freely, making it suitable for both dry and wet sanding, by machine or by hand.
ABRALON J3
Abralon J3 is a unique multifunctional Abralon abrasive for an ultrafine surface finish for both smooth and profiled surfaces. Abralon J3 has a higher density foam layer which is only 3 mm thick. Recommended for high gloss applications, leaving a very smooth surface prior to polish. Abralon J3 is suitable for all kinds of material, both smooth and profiled surfaces. The flexible weave allows water and air to pass freely, and makes it suitable for both dry and wet sanding.
NOVASTAR FLEX
You can easily tackle all kinds of shapes and complex contours with this ultra-flexible hand sanding sheet for dry sanding. The abrasive surface does not wrinkle or break, and there are no sharp edges even when folded. With the Novastar Flex hand sanding sheets you get the perfect balance in cutting and scratch pattern. Features colour coded grits and the grip backing, as well as centre perforation for tearing in half. Both full and half sheets can be used with or without a hand pad. The sheets are easy to clean from dust, thus last long and gives a superior finish, helping you save both time and money.
By using this site you agree to the use of cookies for analytics, personalized content and ads.
X