Adapter for Dust Extractor 30-48mm

Adapter for different hand sanding tools for connecting to dust extractor.

Adapter for Hand Sanding Blocks 20/28mm

A 20/28 mm soft adapter, used with dust extraction hoses. Due to the softness, the adapter is easy to attach to the hand sanding block.

Backing Pad 125mm 5/16" Grip 5H Medium

Backing pad medium for grip discs.

Backing Pad 125mm 5/16" Grip Medium

Backing pad grip medium no hole for grip discs.

Backing Pad 125mm M14 Grip 17H for Suction Hood

This 125 mm (5”) backing pad is equipped with robust hooks and 17 holes enabling great dust suction. This backing pad should be used together with the dust suction hood (Mirka code 9190152001) only.

Backing Pad 125mm M14 Grip Hard for Polisher

Hard backing pad 5" 125 mm M14

Backing Pad 125mm M14 Grip Soft for Polisher

Soft backing pad 5" 125 mm M14

Backing Pad 135mm M14 Grip Soft Edge for Polisher

Backing pad 135 mm M14 soft.Used together with 150 mm polishing pads.

Backing Pad 150mm 5/16" Grip 15H Medium

Backing pad medium for grip discs. This backing pad fits Mirka’s 6 H, 6 + 1 H, 8 + 1 H and 15 H discs.

Backing Pad 150mm 5/16" Grip 48H/17H Medium

Backing Pad 150mm 5/16" Grip 6H Medium

Backing pad medium for grip discs.

Backing Pad 150mm 5/16" Grip 6H Soft

Soft Backing pad for grip discs.

Backing Pad 150mm 5/16" Grip Medium

Non hole backing pad medium for grip discs.

Backing Pad 150mm 5/16" PSA 6H Medium

Backing pad medium for PSA discs.

Backing Pad 150mm 5/16" PSA Medium

Backing pad medium no hole for PSA discs.

Backing Pad 150mm M14 Grip Soft for Polisher

Soft backing pad 6" 150 mm M14

Backing Pad 165mm M14 Grip Soft Edge for Polisher

Backing pad 165 mm M14 soft. Used together with 180 mm polishing pads.

Backing Pad 175mm M14, Twisted Wool for Polisher

Backing pad 7" 175 mm M14

Backing Pad 225mm 25H for Mirka LEROS + 8 Screws

Backing pad 225mm designed for Mirka® LEROS 950CV. This plain, hard backing pad has to be used together with an interface (MIW9534611). The interface is attached to the backing pad with screws (included). Optimised to be used together with Abranet net sanding abrasive for a smooth surface finish.

Backing Pad 225mm 25H Grip for Mirka LEROS

225 mm backing pad designed forMirka® LEROS 950CV. This hard backing pad is recommended to be used together with an interface (MIW9534611). Optimised to be used together with Abranet net sanding abrasive for a smooth surface finish.

Backing Pad 32mm PSA Soft, 5/Pack

Female no hole PSA soft backing pad with an even surface.

Backing Pad 34mm Grip Medium, 10/Pack

Backing Pad 70x198mm Grip 56H Medium

Velcro backing pad for orbital sanders. Delivered with one pad protector and user instructions.

Backing Pad 75x100mm Grip 33H Medium

Grip backing pad for pneumatic orbital sanders. Delivered with one pad protector and user instructions.

Backing Pad 77mm 1/4" Grip 6H Medium

Backing pad medium for grip disc, delivered with one pad protection disc including user instructions.

Backing Pad 77mm 1/4" Grip Medium

Backing pad medium for grip discs.

Backing Pad 77mm 5/16" Grip Medium

Suitable only for the pneumatic sander Mirka OS 310.

Backing Pad 77mm M14 Grip Hard for Polisher

Hard backing pad 3" 77 mm M14

Backing Pad 77mm M14 Grip Soft for Polisher

Soft backing pad 3" 77 mm M14

Backing Pad 81x133mm Grip 54H Medium

Grip backing pad for pneumatic orbital sanders. Delivered with one pad protector and user instructions.

Backing Pad 81x165mm for DEOS 353 50H Medium

An extension backing pad for the Mirka® DEOS 353 which enables reaching further into narrow places, one specific focus application is sanding of window shutters. In order to attach the extension pad, you simply remove the standard backing pad and attach the extension backing pad. When sanding with the extension you only use part of the pad, and therefore the standard 81x133mm abrasives are intended to be used. In addition, there is also a pad saver for the extension backing pad (8299532111).

Backing Pad Net 100x152x152mm Grip 34H Medium

Backing pad suitable for the Mirka® DEOS Delta sander.

Backing Pad Net 125mm 5/16" Grip 28H 130g Medium

Fits all Mirka 150 mm (6”) sanders. This 130g backing pad gives you the ability to switch sizes and use 125 mm (5”) sanding discs.

Backing Pad Net 125mm 5/16" Grip 28H Hard

This is a new product. A 125 mm backing pad recommended for heavier sanding applications where higher stock removal is needed.

Backing Pad Net 125mm 5/16" Grip 28H Medium

This backing pad is suitable for our multihole configuration 125 mm (5”) 17H, available in the Gold product range. This backing pad can also can be used on Festo (8+1H), Bosch (8H) and Black & Decker machines.

Backing Pad Net 125mm 5/16" Grip 28H Soft

A soft 125 mmm backing pad, especially suited for profile sanding and where a soft edge is needed.

Backing Pad Net 125mm 5/16" Grip 44H Medium

Backing pad medium for Abranet discs. Delivered with a pad protector and user instructions.

Backing Pad Net 150mm 5/16" Grip 48H Hard

This 150 mm backing pad is recommended for heavier sanding applications where higher stock removal is needed.

Backing Pad Net 150mm 5/16" Grip 48H Medium

A 150 mm (6”) backing pad with a central air inlet. The air channels leading to the center of the backing pad has an increased air flow and therefore the dust is removed efficiently.

Backing Pad Net 150mm 5/16" Grip 48H Soft

A soft 150 mmm backing pad, especially suited for profile sanding and where a soft edge is needed.

Backing Pad Net 150mm 5/16" Grip 51H Med

Backing pad medium for net discs. Delivered with a pad saver and user instructions.

Backing Pad Net 200mm Grip 89H Medium

This 200 mm (8 in.) Net Backing Pad with 89 holes is unique and designed only for MIRKA ROS2-850CV two-handed randon orbital sander.

Backing Pad Net 70x198mm Grip 48H Medium

Grip backing pad for electric orbital sanders.

Backing Pad Net 81x133mm Grip 46H Medium

Grip backing pad for electric orbital sander.

Backing Pad Quick Lock 20mm PSA Hard, 10/Pack

Quick Lock pad 20mm PSA hard suitable for Mirka ROS 150NV, Mirka AOS 130NV, Mirka AOS-B 130NV and Mirka AROS-B 150NV sanders.

Backing Pad Quick Lock 32mm Grip Hard, 5/Pack

Backing Pad Quick Lock 32mm Grip Soft, 10/Pack

Quick Lock pad 32mm Grip soft suitable for Mirka ROS 150NV sander.

Backing Pad Quick Lock 32mm PSA Hard, 10/Pack

Quick Lock pad 32mm PSA hard suitable for Mirka ROS 150NV sander.

Backing Pad Quick Lock 32mm PSA Soft Edge, 5/Pack

Quick Lock pad 32mm PSA Soft Edge suitable for Mirka ROS 150NV, Mirka AOS 130NV, Mirka AOS-B 130NV and Mirka AROS-B 150NV sanders.

Backing Pad Quick Lock 32mm PSA Soft, 10/Pack

Quick Lock pad 32mm PSA soft suitable for Mirka ROS 150NV sander.

Backing Pad UNI 150mm 5/16"+ M8 Grip 57H Medium

Uni-Backing Pad for grip discs. Delivered with one Pad Protector and user instructions. This pad is suitable for Festool Multi-Jetstream system.

Backing Pad UNI 150mm 5/16"+ M8 Grip 61H Hard

Abranet hard density Unipad 150 mm (6") for all hole combinations. This Abranet unipad is optimized for flat surfaces and has a high edge durability. 15 larger holes allow use of conventional discs with 6 h, 6 + 1 h, 9 h and 15 h. Suitable for narrow shroud machines but not recommended to be used with 150 mm ROS machines, because the combination of Unipad + wide/Abranet shroud machines does not give the optimal dust extraction. Delivered with one 150 mm (6") pad saver. To ensure correct installation, always use the supplied spacing washers, making sure that a minimum gap exists between the sander’s shroud and the top part of the backing pad, to prevent friction between the two parts. Tighten the screw hard. The backing pad should never turn idle. From time to time, check that the screw is well tight.

Backing Pad UNI 150mm 5/16"+ M8 Grip 61H Medium

Abranet medium density Unipad 150 mm (6") for all hole combinations. This Abranet unipad is optimized for flat surfaces and has a high edge durability. 15 larger holes allow use of conventional discs with 6 h, 6 + 1 h, 9 h and 15 h. Suitable for narrow shroud machines but not recommended to be used with 150 mm ROS machines, because the combination of Unipad + wide/Abranet shroud machines does not give the optimal dust extraction. Delivered with one 150 mm (6") pad saver. To ensure correct installation, always use the supplied spacing washers, making sure that a minimum gap exists between the sander’s shroud and the top part of the backing pad, to prevent friction between the two parts. Tighten the screw hard. The backing pad should never turn idle. From time to time, check that the screw is well tight.

Backing plate for DEOS 70x198mm

Backing plate for DEOS 81x133mm

Backing Plate Screw Kit

Balancing Housing Screw Kit

Balancing Screw Kit for DEROS/PROS

A tool kit for reducing vibrations when sanding with pad saver or interface. Disconnect air supply/power cable. Remove the backing pad and add hex nuts and screws. Tighten to 2 Nm.

Balancing Weight 100x152x152 mm

Balancing Weight for DEOS 70x198mm

Balancing Weight for DEOS 81x133mm

Bearing Dual Seal Kit 125/150mm

Bearing Housing for DEOS

Bearing Kit for DEOS

Blending Tape Smooth Edge 20mm x 25m

The smooth blending tape is for masking swage lines and panel edges. The wide foam tape ensures a straight line and a seamless blending from old to new paintwork. Eliminates unnecessary rework due to unwanted paint edges.

Bracket Kit for CEROS Power

Brackets kit for Mirka CEROS power for Mirka Dust Extractors 412/415 or 912/915.

Brake Seal for 325/350

Brake Seal MPP0321 125/150mm for DEROS/PROS

Carry Bag for Mirka Hose, Black

This Carry Bag fits all Mirka hoses and also the box that the hoses are delivered in. This Carry Bag can also be used to transport other surface finishing equipment. The size of the Carry Bag is (L x W x H): 55 cm x 25 cm x 47 cm.

Carry Bag for Mirka LEROS

Practical bag with carrying strap for carrying theMirka® LEROS wall sander. With Mirka® LEROS bag on the shoulder you have both hands free for carrying other accessories, such as the dust extractor. In addition there is also space for abrasives and backing pads in the bag. The bag also protects the sander for example during transport.

Case Inlay for 150mm discs

Case Inlay for 150mm discs. Suitable for Mirka Case 400x300x210mm (MIN6533011) L:38,1cm, W:26,5cm, D:8cm.

Case Inlay for CEROS

Case Inlay for DEROS/DEOS incl lid pad

Cleaning Cloth Micro Fiber 330x330mm Yellow,2/Pack

A yellow soft micro fiber cloth, with a fine structure. Absorbs residue well and is washable. Packed 2 pcs/bag.

Cleaning Cloth Micro Fiber 400x400 mm Grey, 2/Pack

This grey colored cleaning cloth is gentle to the surface and leaves less scratch marks. It has a very good absorption capability and glides smoothly on the surface with very low friction.

Cleaning Tool for Lambswool Pad

The pad cleaning tool is a hand-held cleaning tool for wool and foam pads. Use the wheels to clean the pads by rolling the tool over the spinning pad. Use the abrasive plates on the side to level and reshape foam pads.

Connector Air Inlet for Hand Sanding Block 20/20mm

When fixed on a Mirka 20 mm dust extraction hose, this connector enables a quick and smooth change of the hose from one Mirka hand sanding block to another.

Connector for Air+Electric Hoses with threads

Connector for air + electric hoses with threads. This adapter is close to the dust extractor, where the pneumatic tube/electrical cable comes out. The adapter comes with the following hoses: MIE6514511, MIE6514711, 8992514511, 8992514711 and 8992515011.

Cover Plate for DEROS/DEOS

CSD Disc 100x13mm Red

DC Extension Cord 4m 22V for CEROS

Dry Guide Coat Black 100g

The Dry Guide Coat has excellent covering properties. The powder makes all imperfections and scratches visible. This unique applicator leaves an even powder coating. The applicator has flexible edges which makes it easy to use on contoured areas. This is a great tool in guiding the operator through the sanding process and achieving a perfect result. The black powder is used for light colour surfaces.

Dry Guide Coat White 100g

The Dry Guide Coat has excellent covering properties. The powder makes all imperfections and scratches visible. This unique applicator leaves an even powder coating. The applicator has flexible edges which makes it easy to use on contoured areas. This is a great tool in guiding the operator through the sanding process and achieving a perfect result. The white powder is used for dark colour surfaces.

Dust Mask FFP-1, 20/unit

Dust Mask FFP-2, 20/Unit

Dust Mask FFP-2V, 10/Unit

Dust Suction Hood for PS 1437 Polisher

An easy keyless attachment of hood to Mirka PS 1437 polisher suitable for demanding aggressive sanding applications and used together with Abranet HD, it supports the dust-free solution. The front segment can be removed for a better visibility and to reach edges, the springs gives also a smoother operation. The brushes ensure a good suction and protects the surface.

End Cap for LEROS

Extension for Solution Trolley, DE 1230

Extension Hose 32mm x 10m

This 10 m extension hose can be cut into desired length and connected to the MIN6519411 hose. Note that the hose adapter 32/54 mm should be removed. The extension hose can not be connected to the Mirka sanders directly. The hose is cylindrical, it has the same diameter throughout the whole length of the hose.

Extension shaft for Mirka LEROS

Fan 2,5mm/130g Pad for DEROS 150mm

Fan 5,0mm/100g Pad for DEROS 125mm

Fan 5,0mm/130g Pad for DEROS 150mm

Fan 8,0mm/130g Pad for DEROS 150mm

Fan for DEOS

Fastening Straps Kit 6/Pack

This hook and loop fastening strap kit give the possibility to attach the electrical cord to the vacuum hose.

Finessing Damper 60ml

For finessing operations with Polarstar SR3, SR5 or SR7 abrasives.This product dispenses quickly and neatly an appropriate amount of liquid to the surface. By using the finessing damper you'll get less excess splashing and wiping off and it helps to avoid skin contact with harmful liquids. Remember to clean the disc inbetween sanding operations, by gently running the disc against the damper head.

Flap Disc M-FIX 127x22mm ZIR 40

Foam Tape 13mm x 50m

The high density traditional soft foam tape for sealing of all common bodywork gaps. Mirka’s soft foam tape has a high quality adhesion that ensures safe adhesion even when repositioned. It is also easy to remove after use. The high density soft foam gives flexible positioning in angels as well as a quick and proper sealing.

Foam Tape Premium 20mm x 50m

The Premium foam tape is a unique and efficient way to mask car jambs. For use in all apertures, A, B and C posts. The Premium foam tape is shaped to give a precise fingertip adjustment and should be attached on moving parts. One continuous length.

Golden Finish Pad-1 155x25mm Yellow Waffle, 2/Pack

Mirka Golden Finish System. The fast and simple post paint solution. For sanding scratch removal.

Golden Finish Pad-1 85x25mm Yellow Waffle, 2/Pack

Mirka Golden Finish System. The fast and simple post paint solution. for sanding scratch removal.

Golden Finish Pad-2 155x25mm Black Waffle, 2/Pack

Mirka Golden Finish System. The fast and simple post paint solution. For hologram and swirl removal.

Golden Finish Pad-2 85x25mm Black Waffle, 2/Pack

Mirka Golden Finish System. The fast and simple post paint solution. For hologram and swirl removal.

Grease Gun for AOS 130NV

A grease gun, to be used when lubricating the Mirka AOS 130NV sander. The use of grease to extend the life of the tool is recommended. For use in industrial applications in heavy usage it is recommended to grease once a day. In more average use, such as in ART body shops, once a week is enough. With this grease gun it is recommended to use Molybdenum Disulfide base grease. Information about the usage of the grease gun is available in the manual of the Mirka AOS 130NV sander.

Ground Wire

Hand Towel Rack for Solution Trolley

Hand Towel rack for Solution Trolley

Hepa Filter Cover for DE 1230/1242

The HEPA Filter Cover for DE 1230/1242 is necessary to keep the HEPA filter (Mirkacode 8999100711) in place.

Hepa Filter for DE 1230/1242

The HEPA (High Efficiency Particulate Air) filter can be installed in addition to the standard filter to improve the filtration. By adding this filter you will get a triple filtration: 1. Fleece dust bag 2. Standard main filter 3. HEPA filter. Please note that adding this filter will not make a dust extractor DE 1230/42 an H-class extractor, even though the filter itself fulfills HEPA requirements. When installing a HEPA-filter for the first time, the HEPA Filter Cover for DE 1230/1242 (Mirkacode 8999100811) is necessary.

Hook D, 2/Pack

Hose 1,8m MPP9023 for PROS DB

Suitable for Mirka PROS 550DB and 650DB. (Mirka code: 8995550211 and 8995650211)

Hose 19mmx1,5m MPA0300

Suitable for 19 mm swivel exhaust for Mirka pneumatic sanders.

Hose 20mm x 0,5m + Connector

This conductive adapter enables a quick change between Mirka power tools with 19/20 mm dust extraction fittings, e.g. Mirka OS383CV. Fix this adapter on each tool and connect/disconnect to/from any Mirka hose assembly.

Hose 20mm x 4m for Hand Sanding Blocks

Hose for hand sanding blocks.

Hose 20mm x 5m for Hand Sanding Blocks

This 5 m hose for Mirka hand sanding blocks can be connected to existing Mirka dust extraction hose assemblies. The hose is conductive, which leads the sparks from static electricity (common in hand sanding) to the grounded dust extractor.

Hose 27mm x 0,5m + Connector

This adapter + hose is suitable for all Mirka pneumatic sanders.

Hose 27mm x 10m + Connector

This product consists of both a 10 m hose + a connector. It makes it easier to setup a system with a 10 m hose and cable.

Hose 27mm x 10m with Integrated Cable CE 230V

Dust extraction hose with integrated electric cable. The hose is suitable for Mirka DEROS and Mirka DEOS EU-plug versions.The extended length, 10 m, gives more possibilities for movability.

Hose 27mm x 10m with Integrated Pneumatics

This hose can be directly connected to all our pneumatic CV machines.This hose is almost similar to the dust extractor hose with Mirka code 8992514511, which is 32 mm x 5,5 m.

Hose 27mm x 15m with Integrated Pneumatics

Hose 27mm x 4m + Connector

Flexible suction hose connecting the sander and the dust extractor. Please note that this hose is conical. The benefit of having a conical dust extractor hose is that it improves the dust suction.

Hose 27mm x 5,5m with Integrated Cable CE 230V

Dust extraction hose with integrated electric cable. The hose is suitable for Mirka DEROS and Mirka DEOS EU-plug versions.The extended length, 5,5 m, ensures better movability.

Hose 27mm x 5,5m with Integrated Pneumatics

This Pneumatic Hose Assembly is ergonomic and has a weight of 1850 grams only. It has a high flexibility and is fully conductive. This hose can be directly connected to all our pneumatic CV machines.

Hose 28mmx1,8m MPA0412

Suitable for 28 mm swivel exhaust for Mirka pneumatic sanders.

Hose 4m for Miro 955/955-S

Hose Adapter 32/54mm

Hose adapter with diameter 32/54 mm for Mirka dust extractors. Comes with the following hoses: MIE6514511 / MIE6514511US, MIE6514711 / MIE6514711US,MIN6519411, MIN6519711, 8992514511, 8992514711 and 8992515011. This adapter goes from the hose into the dust extractor.

Hose Arm for Solution Trolley

This product can be assembled onto the Mirka solution trolley and enables more convenient working. By using the hose arm the operator ensures that the hose comes from above and reduces the risk of the hose harming the workpiece.

Hose Connector 32/32mm

Hose connector with diameter 32/32 mm. Delivered together with extension hose MIN6519711. Enables connection with the hose MIN6519411.

Hose Connector Kit No. 3:1+3:2 for Miro 955/955-S

Hose connector kit No. 3-1 and 3-2 for Miro 955 & 955-S. Adapter for both ends on the hose. Connector 4b: diameter 54 mm.

Hose Hook for Work Station for DE 1230/1242

Hose Hook for Work Station for DE 1230/1242. Is screwed onto the side of the work station.

Housing for DEOS 353/383

Housing for DEROS 550,625,650,680

Interface 125mm 33H 10mm, 1/Pack

The 10 mm thick multi hole interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 125mm 33H 10mm, 5/Pack

The 10 mm thick multi hole interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 125mm 33H 5mm, 1/Pack

This 5 mm interface enables a much smoother usage of the Mirka® PS 1437 polisher equipped with the hood. This interface is also recommended for 125 mm (5”) Mirka® PROS and Mirka® DEROS sanders. The 5 mm thick multi hole interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 125mm 33H 5mm, 5/Pack

This 5 mm interface enables a much smoother usage of the Mirka® PS 1437 polisher equipped with the hood. This interface is also recommended for 125 mm (5”) Mirka® PROS and Mirka® DEROS sanders. The 5 mm thick interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 125mm 44H 10mm, 5/Pack

The 10 mm thick multi interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 125mm 44H 5mm, 5/Pack

The 5 mm thick multi hole interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours. The pad is developed to be used for light profile sanding, Paint Preparation sanding, Factory Primer (E-Coat) sanding and Top- and Clear Coat sanding. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 150mm 67H 10mm, 1/Pack

The 10 mm thick multi hole interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 150mm 67H 10mm, 5/Pack

The 10 mm thick multi hole interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 150mm 67H 5mm, 5/Pack

The 5 mm thick multi hole interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours. The pad is developed to be used for light profile sanding, Paint Preparation sanding, Factory Primer (E-Coat) sanding and Top- and Clear Coat sanding. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 225mm 25H for Mirka LEROS, 1/Pack

3 mm thick soft interface for Mirka® LEROS backing pad (MIW9564311). The interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 225mm 25H for Mirka LEROS, 3/Pack

3 mm thick soft interface for Mirka® LEROS backing pad (MIW9564311). The interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 225mm 8+1H 15mm Hard, 1/Pack

A hard, 15 mm thick interface pad suitable for Miro 955/955S dry wall sanders. This interface is only to be used with Mirka's Net discs or Gold 16 holes discs. The interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 225mm 8+1H 17mm Medium, 1/Pack

A medium hard,17 mm thick interface suitable for Miro 955/955S dry wall sanders. This interface is only to be used with Mirka's Net discs or Gold 16 holes discs. The interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 225mm 8+1H 22mm Medium, 1/Pack

A medium hard, 22 mm thick interface suitable for Miro 955/955S dry wall sanders. This interface is only to be used with Mirka's Net discs or Gold 16 holes discs. The interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 70x125mm 13H 10mm, 1/Pack

A flexible interface for hand sanding blocks. This 7 mm thick interface strip is used in combination with hook & loop sanding strips for sanding rounded surfaces and contours.

Interface 70x125mm 13H 10mm, 5/Pack

A flexible interface for hand sanding blocks. This 10 mm thick interface strip is used in combination with hook & loop sanding strips for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 70x198mm 56H 10mm, 1/Pack

A flexible interface for hand sanding blocks. This 10mm thick interface strip is used in combination with hook & loop sanding strips for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 70x198mm 56H 10mm, 5/Pack

A flexible interface for hand sanding blocks. This 10 mm thick interface strip is used in combination with hook & loop sanding strips for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding disc.

Interface 75x100mm 33H 7mm, 5/Pack

A flexible 7 mm thick interface pad, suitable for hand sanding or for orbital sanders. The interface pad is used in combination with hook & loop sanding sheets for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding sheet.

Interface 77mm 6H 5mm, 5/Pack

The 5 mm thick multi interface pad is used in combination with hook & loop sanding discs for sanding rounded surfaces and contours, with Mirka's net products. Using the multi interface pad will also produce a softer result. The interface pad is placed between the backing pad and the sanding disc.

Interface 80x230mm 55H 5mm, 1/Pack

This interface is specially developed for the Mirka Handy hand sanding block. The 5 mm thick interface pad is used in combination with hook & loop sanding sheets for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding sheet.

Interface 81x133mm 54H 7mm, 5/Pack

A flexible 7 mm thick interface pad, suitable for hand sanding or for orbital sanders. The interface pad is used in combination with hook & loop sanding sheets for sanding rounded surfaces and contours. Using the interface pad will also produce a softer result. The Interface pad is placed between the backing pad and the sanding sheet.

Lambswool Pad 150mm Grip, 2/Pack

Lambs' wool pad 6" 150 mm 2-pack

Lambswool Pad 180mm Grip, 2/Pack

Lambs' wool pad 7,5" 180 mm 2-pack

Lambswool Pad 77mm Grip, 5/Pack

Lambs' wool pad 3" 77 mm 5-pack

Lambswool Pad Pro 135mm Grip, 10/Pack

The pad is made of premium wool fibres. The wool fibers are optimized to keep the performance on a high level for demanding use. An excellent result is achieved when using the pad in combination with Mirka Polarshine compounds 35, 15, 10 and 8. The pad is suitable for polishing all kinds of paintworks in ART, Marine and Wood sectors as well as OEM applications.

Lambswool Pad Pro 150mm Grip, 2/Pack

The pad is made of premium wool fibres. The wool fibers are optimized to keep the performance on a high level for demanding use. An excellent result is achieved when using the pad in combination with Mirka Polarshine compounds 35, 15, 10 and 8. The pad is suitable for polishing all kinds of paintworks in ART, Marine and Wood sectors as well as OEM applications.

Lambswool Pad Pro 180mm Grip, 2/Pack

The pad is made of premium wool fibres. The wool fibers are optimized to keep the performance on a high level for demanding use. An excellent result is achieved when using the pad in combination with Mirka Polarshine compounds 35, 15, 10 and 8. The pad is suitable for polishing all kinds of paintworks in ART, Marine and Wood sectors as well as OEM applications.

Lambswool Pad Pro 80mm Grip, 10/Pack

The pad is made of premium wool fibres. The wool fibers are optimized to keep the performance on a high level for demanding use. An excellent result is achieved when using the pad in combination with Mirka Polarshine compounds 35, 15, 10 and 8. The pad is suitable for polishing all kinds of paintworks in ART, Marine and Wood sectors as well as OEM applications.

Lambswool Pad Pro 80mm Grip, 2/Pack

The pad is made of premium wool fibres. The wool fibers are optimized to keep the performance on a high level for demanding use. An excellent result is achieved when using the pad in combination with Mirka Polarshine compounds 35, 15, 10 and 8. The pad is suitable for polishing all kinds of paintworks in ART, Marine and Wood sectors as well as OEM applications.

Lever 2,5mm for DEROS

Lever 3,0mm for DEOS

Lever 5,0mm for DEROS

Lever 8,0mm for DEROS

Lifting Tape Perforated 50mm x 10m

Perforated lifting tape to lift rubber trims and body side mouldings from surface and to protect the trims during painting. Perforated for easy tear off, fast and effective masking. The perforation also improves flexibility for the tape to follow contures and tight curves.

Mains Cable 10m CE 230V

This mains cable can be used with Mirka DEROS, Mirka DEOS and Mirka LEROS electric sanders that are sold in EU. This is not an extension cable and it can not be be combined with the 4,3 m cable (MIE6516011).

Mains Cable 4,3m 100-120V UK

Mains Cable 4,3m CE 230V EU

Mains cable that is plugged directly to a Mirka DEROS, DEOS or LEROS electric sander.

Mains Cable 4,3m CE 230V UK

Mains Cable 4,3m UL 100-120V US

Manometer Setting Tool for DE 915/1230 M

Masking Film 4m x 150m

A polyehtylene film for paint overspray protection. It is electrostatic and corona treated to ensure fast and easy vehicle masking and excellent paint overspray adhesion. The box is possible to use as dispenser due to the perforation on the side.

Masking Film Premium 4m x100m

A polyehtylene film for paint overspray protection. It is electrostatic and corona treated to ensure fast and easy vehicle masking and excellent paint overspray adhesion. The box is possible to use as dispenser due to the perforation on the side.

Masking Film Premium 5,3m x100m

Mini-File 20x42mm Fine/Coarse

Ergonomically-designed rectification tool to remove runs and dirt nibs. Two-sided file held in place via magnet. One side is coarse-cut, and the other is fine-cut.

Mirka 2-Way Electric Adapter 230V EU, Black

Mirka Connector for Air+Electric Hoses

Connector for air + electric hoses. Comes with the following hoses: MIE6514511, MIE6514711, 8992514511, 8992514711 and 8992515011.

Mirka Diamond Cup Wheel 115x22,2mm SD-4,5 2-RIM

Segmented double track diamond cup wheel for cutting concrete and natural stone.

Mirka Diamond Cup Wheel 125x22,2mm SB-5

Mirka Diamond Cup Wheel 125x22,2mm SD-5 2-RIM

Mirka Diamond Cup Wheel 180x22,2mm SD-7 2-RIM

Mirka Diamond Wheel 115x22,2mm SE

Mirka Diamond Wheel 115x22,2mm TR

Mirka Diamond Wheel 125x22,2mm SE

Mirka Diamond Wheel 125x22,2mm TR

Mirka Diamond Wheel 125x22,2mm TWF

Mirka Diamond Wheel 150x22,2mm TR

Mirka Diamond Wheel 180x22,2mm SE

Mirka Diamond Wheel 180x22,2mm TR

Mirka Diamond Wheel 180x25,4mm TWF

Mirka Diamond Wheel 230x22,2mm SE

Mirka Diamond Wheel 230x22,2mm TR

Mirka Diamond Wheel PRO 125x22,2mm SE

Mirka Diamond Wheel PRO 125x22,2mm TWF

Mirka Diamond Wheel PRO 230x22,2mm SE

Mirka LEROS screw pad conversion kit

Mirka Multi-Purpose Belt

Easy-to-use, flexible belt with two pockets; the smaller pocket perfectly fits a cordless sander and the larger pocket can be used for accessories, such as microfibre cloths and a Polarshine bottle. The belt clips are covered with fabric.

Mirka Sleeve + Cable CE 230V + Hose 10m

Preassembled 10m hose and CE 230V cable in a 3,5m durable sleeve. The sleeve makes handling easier and protects the work surface from scratches. The part of the hose and cable not covered by the sleeve is held together by hook and loop straps. Connector is included. Designed to be used with Mirka® DEROS, Mirka® DEOS and Mirka® LEROS.

Mirka Sleeve + Cable CE 230V + Hose 4m

Preassembled 4m hose with connector and CE 230V cable in a durable sleeve. The sleeve makes handling easier and protects the work surface from scratches. Designed to be used with Mirka® DEROS, Mirka® DEOS and Mirka® LEROS.

Mirka Sleeve for Hose and Cable 3,5 m

Durable 3.5 m sleeve designed to be used with Mirka® DEROS, Mirka® DEOS and Mirka® LEROS standard hose (MIN6519411) and the 4.3 m cable. The sleeve makes handling easier and protects the work surface from scratches.

Motor 2,5/130g Pad DEROS X 110V

Motor 2,5mm/130g Pad for DEROS 150mm 230V

Motor 2,5mm/30g Pad for DEROS 325 230V

Motor 2,5mm/30g Pad for DEROS 325X 110V

Motor 5,0/100g Pad DEROS X 110V

Motor 5,0/130g Pad DEROS X 110V

Motor 5,0mm/100g Pad for DEROS 125mm 230V

Motor 5,0mm/130g Pad for DEROS 150mm 230V

Motor 5,0mm/30g Pad for DEROS 350 230V

Motor 5,0mm/30g Pad for DEROS 350X 110V

Motor 8,0mm/130g Pad for DEROS 150mm 230V

Motor Assembly 110V for DEOS

Motor Assembly 110V for LEROS

Motor Assembly 230V for DEOS

Pad Saver 100x152x152mm 34H, 1/Pack

Pad saver suitable for the Mirka® DEOS Delta. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 100x152x152mm 34H, 5/Pack

Pad saver suitable for the Mirka® DEOS Delta. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 115x230mm 10H, 1/Pack

A pad saver strip 115 x 230 mm for backing pads. This pad saver is designed with 10 holes. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding strip, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 115x230mm 10H, 5/Pack

A pad saver 115 x 230 mm for backing pads. This pad saver is designed with 10 holes. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding sheet, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 125mm 33H, 1/Pack

Pad saver for 125mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 125mm 33H, 5/Pack

Pad saver for 125mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 125mm 44H, 1/Pack

This pad saver for 125mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 125mm 44H, 5/Pack

Pad saver for 125mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regulary. The pad savers prolong the life of the backing pad.

Pad Saver 150mm 57H, 5/Pack

Pad saver for 150mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 150mm 67H, 1/Pack

Pad saver for 125mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 150mm 67H, 5/Pack

Pad saver for 150mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 200mm 89H, 3/Pack

Pad saver for 200mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 225mm 25H for Mirka LEROS, 1/Pack

Pad saver suitable for the Mirka LEROS. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 225mm 27H, 1/Pack

Pad saver for 225mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regulary. The pad savers prolong the life of the backing pad. Please note that this particular pad saver does not fit the Mirka® LEROS machine. This one enables use of Mirka Abranet on competitors’ wall sanders.

Pad Saver 70x198mm 56H, 5/Pack

Pad saver for 70x198mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding strips, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 70x400mm 14H, 5/Pack

Pad saver for 70x400mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding strips, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 75x100mm 33H, 5/Pack

Pad saver for 75x100mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding sheet, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 77mm 6H, 5/Pack

Pad saver for 77mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regulary. The pad savers prolong the life of the backing pad.

Pad Saver 81x133mm 54H, 1/Pack

Pad saver for 81x133mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding sheet, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 81x133mm 54H, 5/Pack

Pad saver for 81x133mm backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 81x165mm DEOS 353 Extended 50H 1/Pack

A pad saver suitable to use together with the extension backing pad for the Mirka® DEOS 353 (8292366011). The extension enables reaching further into narrow places, one specific focus application is sanding of window shutters. Mirka's pad savers are designed to protect the backing pad from wear and tear. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Saver 90x90mm 12H, 1/Pack

A pad saver for 90x90mm triangle backing pads. Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost-effective pad savers, placed between the backing pad and the sanding triangle, should be changed regularly. The pad savers prolong the life of the backing pad.

Pad Screw Kit for DEOS

Pad Washer Universal

The Mirka universal pad washer is a professional system for cleaning all kind of pads. It is designed to be used both with a circular and orbital polisher. The pad washer is a versatile and durable product. A clean pad ensures a good polishing result and extends the life of the polishing pads.

Pad Wrench 13mm MPA3226 for RPS

Suitable for Mirka® RPS 300CV.

Pad Wrench 17mm for 77mm machines

Pad Wrench 24mm for 125/150mm Machines

Suitable for 125 / 150 mm electric and pneumatic sanders as well two-handed pneumatic sanders and polishers.

PCB Spacer Kit

Polishing Felt Pad 125x6mm Grip White, 2/Pack

This flat hard white felt pad is designed for glass polishing applications. The thick felt pad construction has a good balance and provides a stable feeling during polishing. The pad is designed to be used in combination with Polarshine E3, which results in a good glass sanding process.

Polishing Felt Pad 77x6mm Grip White, 2/Pack

This flat hard white felt pad is designed for glass polishing applications. The thick felt pad construction has a good balance and provides a stable feeling during polishing. The pad is designed to be used in combination with Polarshine E3, which results in a good glass sanding process.

Polishing Foam Pad 135x25mm Yellow Waffle,10/Pack

A polishing pad with medium density hardness and waffle shape. The durable reticulated foam has an excellent elasticity. The waffle shape has an optimized pattern which improves the cutting performance and reduces the surface temperature during the polishing process. The pad is designed to be used in combination with Mirka Polishing Compounds, for both cutting with Polarshine 15 and polishing with Polarshine 10 and 8. The foam pad is suitable for all kinds of polishing processes: paintworks in ART, Marine and Wood sectors as well as Vehicle and Tier1.

Polishing Foam Pad 150x25mm Black Flat, 2/Pack

A reticulated flat foam pad for hologram removal gives an excellent finishing on both fresh and fully cured paint works. The good balance between elasticity and density in the foam contributes to the final result. The pad are designed to be used in combination with Polarshine finishing compounds F05, VF5 and with Polarshine 3 Nano wax.

Polishing Foam Pad 150x25mm Black Waffle, 2/Pack

A reticulated waffle shape structured foam pad for hologram removal gives an excellent finishing on both fresh and fully cured paint works. The good balance between elasticity and density in the foam contributes to the final result. The pad are designed to be used in combination with Polarshine finishing compounds F05, VF5 and with Polarshine 3 Nano wax.

Polishing Foam Pad 150x25mm Orange Waffle, 2/Pack

A reticulated foam has an excellent balance in elasticity and softness which remains during usage, and is available as waffle shape structured. The waffle shape has an optimised pattern which gives an improved cutting performance with long life and reduces the surface temperature during polishing. The orange foam is softer than our yellow foam and leaves a better gloss and less holograms. Well suitable for softer clear coats and paints to achieve a perfect finish in one step process for vehicle and Tier 1 applications. For wood high gloss the orange waffle pad is ideal for the second polishing step in order to get an increased gloss level and to remove holograms. The pad is especially well suited for darker colors or softer paints and lacquers. The pads are designed to be used for polishing in combination with Polarshine polishing compounds 12, 10 and 8.

Polishing Foam Pad 150x25mm Yellow Flat, 2/Pack

A flat polishing pad with medium density hardness. The durable reticulated foam has an excellent elasticity. The pad is designed to be used in combination with Mirka Polishing Compounds, for both cutting with Polarshine 15 and polishing with Polarshine 10 and 8. The foam pad is suitable for all kinds of polishing processes: paintworks in ART, Marine and Wood sectors as well as Vehicle and Tier1.

Polishing Foam Pad 150x25mm Yellow Waffle, 2/Pack

A polishing pad with medium density hardness and waffle shape. The durable reticulated foam has an excellent elasticity. The waffle shape has an optimized pattern which improves the cutting performance and reduces the surface temperature during the polishing process. The pad is designed to be used in combination with Mirka Polishing Compounds, for both cutting with Polarshine 15 and polishing with Polarshine 10 and 8. The foam pad is suitable for all kinds of polishing processes: paintworks in ART, Marine and Wood sectors as well as Vehicle and Tier1.

Polishing Foam Pad 77x20mm White Retic., 20/Pack

A flat hard white foam pad, designed for OEM applications and mainly to be used with the Mirka ROP2-312NV polisher. The foam pad is produced from reticulated foam, which is more stable and gives a faster cut and a longer lifetime. The pad cools down faster after polishing, which enables the pad to keep the stable and rigid structure.

Polishing Foam Pad 85x20mm Yellow Flat, 2/Pack

The durable reticulated foam has an excellent elasticity which remains during usage. The pads are designed to be used in combination with Polarshine polishing compounds, both for cutting with 15 and polishing with 10 and 8. Suitable for polishing processes of all kinds of paintworks in ART, Marine and Wood sectors as well as Vehicle and Tier1.

Polishing Foam Pad 85x20mm Yellow Flat, 20/Pack

The durable reticulated foam has an excellent elasticity which remains during usage. The pads are designed to be used in combination with Polarshine polishing compounds, both for cutting with 15 and polishing with 10 and 8. Suitable for polishing processes of all kinds of paintworks in ART, Marine and Wood sectors as well as Vehicle and Tier1.

Polishing Foam Pad 85x25mm Black Waffle, 2/Pack

A reticulated waffle shape structured foam pad for hologram removal gives an excellent finishing on both fresh and fully cured paint works. The good balance between elasticity and density in the foam contributes to the final result. The pad are designed to be used in combination with Polarshine finishing compounds F05, VF5 and with Polarshine 3 Nano wax.

Polishing Foam Pad 85x25mm Burgundy Waffle,20/Pack

Polishing Foam Pad 85x25mm Orange Waffle, 2/Pack

A reticulated foam has an excellent balance in elasticity and softness which remains during usage, and is available as waffle shape structured. The waffle shape has an optimised pattern which gives an improved cutting performance with long life and reduces the surface temperature during polishing. The orange foam is softer than our yellow foam and leaves a better gloss and less holograms. Well suitable for softer clear coats and paints to achieve a perfect finish in one step process for vehicle and Tier 1 applications. For wood high gloss the orange waffle pad is ideal for the second polishing step in order to get an increased gloss level and to remove holograms. The pad is especially well suited for darker colors or softer paints and lacquers. The pads are designed to be used for polishing in combination with Polarshine polishing compounds 12, 10 and 8.

Polishing Foam Pad 85x25mm Orange Waffle, 20/Pack

A reticulated foam has an excellent balance in elasticity and softness which remains during usage, and is available as waffle shape structured. The waffle shape has an optimised pattern which gives an improved cutting performance with long life and reduces the surface temperature during polishing. The orange foam is softer than our yellow foam and leaves a better gloss and less holograms. Well suitable for softer clear coats and paints to achieve a perfect finish in one step process for vehicle and Tier 1 applications. For wood high gloss the orange waffle pad is ideal for the second polishing step in order to get an increased gloss level and to remove holograms. The pad is especially well suited for darker colors or softer paints and lacquers. The pads are designed to be used for polishing in combination with Polarshine polishing compounds 12, 10 and 8.

Polishing Foam Pad 85x25mm Yellow Flat 200/P

Polishing Foam Pad 85x25mm Yellow Waffle, 2/Pack

A polishing pad with medium density hardness and waffle shape. The durable reticulated foam has an excellent elasticity. The waffle shape has an optimized pattern which improves the cutting performance and reduces the surface temperature during the polishing process. The pad is designed to be used in combination with Mirka Polishing Compounds, for both cutting with Polarshine 15 and polishing with Polarshine 10 and 8. The foam pad is suitable for all kinds of polishing processes: paintworks in ART, Marine and Wood sectors as well as Vehicle and Tier1.

Polishing Foam Pad 85x25mm Yellow Waffle, 20/Pack

A polishing pad with medium density hardness and waffle shape. The durable reticulated foam has an excellent elasticity. The waffle shape has an optimized pattern which improves the cutting performance and reduces the surface temperature during the polishing process. The pad is designed to be used in combination with Mirka Polishing Compounds, for both cutting with Polarshine 15 and polishing with Polarshine 10 and 8. The foam pad is suitable for all kinds of polishing processes: paintworks in ART, Marine and Wood sectors as well as Vehicle and Tier1.

Power Tool Hanger A

Tool hook for Mirka® ROS / Mirka® CEROS 77 mm Mirka® ROP2 77 mm, 125 mm Mirka® RP 300NV Mirka® AOS Suitable for the Work Station for DE 1230/1242. Is to be hooked on to the perforated panel.

Power Tool Hanger B

Tool hook for Mirka® OS Mirka® CEROS/DEROS 125 mm, 150 mm Mirka® DEOS Suitable for the Work Station for DE 1230/1242. Is to be hooked on to the perforated panel.

Power Tool Hanger B Long

Power Tool Hanger C

Tool hook for Mirka® ROS Mirka® CEROS 77 mm Mirka® ROP2 77 mm, 125 mm Mirka® RP 300NV / AOS Mirka® CEROS /DEROS 125 mm, 150 mm Mirka® ROS/PROS 125mm, 150mm & 200mm Polishing machines Suitable for the Work Station for DE 1230/1242. Is to be hooked on to the perforated panel.

Pushlock Washer for DEOS

Quick Connector, Soft 27mm

A Soft Quick connector that enables a quick and easy change of tool to the vacuum hose. Suitable for Mirka DEROS, DEOS, LEROS and PROS. Please note that this quick connector is without swivel function and therefore is not suitable for the DecoSander.

Quick Disc 50mm ALO 120

Quick Disc 50mm ALO 36

High performance multi-purpose economy aluminium oxide Quick Disc, ideal for general applications. Especially suitable for deburring. The typical TR (SL3) assembly and disassembly system of the disc is fast for increase productivity, substantially reducing working time. Maximum operating speed 19 000 rpm.

Quick Disc 50mm ALO 50

Strong cotton laminated backing. Durability for edge wear and fray resistance within metal working. Especially developed for blending. The typical TR (SL3) assembly and disassembly system of the disc is fast for increase productivity, substantially reducing working time. Maximum operating speed 19 000 rpm.

Quick Disc 50mm ALO 80

Quick Disc 76mm ALO 36

Quick Disc for the aviation industry. The typical TR (SL3) assembly and disassembly system of the disc is fast for increase productivity, substantially reducing working time.Maximum operating speed 12 800 rpm.

Quick Disc 76mm ALO 50

Quick Disc with open-coat grain distribution and reduced clogging. Used especially on marine applications for stock removal. The typical TR (SL3) assembly and disassembly system of the disc is fast for increase productivity, substantially reducing working time. Maximum operating speed 12 800 rpm.

Quick Lock Kit AP147

Suitable for Mirka® AP 300NV.

Rewireable Connector HP-9R

Rewireable Mains Cable 4,3m CE 230V ANZ

Rewireable Mains Cable 4,3m CE 230V CH/BR

Rewireable Mains Cable 4,3m CE 230V EU

Rewireable Mains Cable 4,3m CE 230V UK

Sanding Plate Base 225mm Grip 16H

Sanding plate base 225 mm for MIRO 955/955S dry wall sanders.

Sanding Sponge 100x70x28mm 100/100, 1/Pack

Sanding Sponge 100x70x28mm 150/150, 100/Pack

Sanding Sponge 100x70x28mm 220/220, 100/Pack

Sanding sponge with a hard foam plastic core, entire surface coated with grains. Suitable for sanding 90 degree angles. Waterproof.

Sanding Sponge 100x70x28mm 36/36, 1/Pack

Sanding Sponge 100x70x28mm 60/60, 1/Pack

Sanding Sponge 100x70x28mm C/C 36/36, 100/Pack

Sanding Sponge 100x70x28mm F/F100/100, 100/Pack

Sanding sponge with a hard foam plastic core, entire surface coated with grains. Suitable for sanding 90 degree angles. Waterproof.

Sanding Sponge 100x70x28mm M/F 60/100

Durable sanding sponge is waterproof and suitable for sanding 90 degree angles.

Sanding Sponge 100x70x28mm M/M 60/60, 100/Pack

Sanding Sponge 120x98x13mm C/C 36/36, 100/Pack

Sanding Sponge 120x98x13mm 100/100, 1/Pack

Sanding Sponge 120x98x13mm 150/150, 100/Pack

Sanding Sponge 120x98x13mm 180/180 SF, 100/Pack

Sanding sponge with a soft foam plastic core, grains on two sides. Used for sanding profiled and rounded surfaces.

Sanding Sponge 120x98x13mm 180/180, 1/Pack

Sanding Sponge 120x98x13mm 220/220 SF+, 100/Pack

Sanding sponge with a soft foam plastic core, grains on two sides. Used for sanding profiled and rounded surfaces.

Sanding Sponge 120x98x13mm 60/60, 1/Pack

Sanding Sponge 120x98x13mm F/F100/100, 100/Pack

Sanding Sponge 120x98x13mm M/M 60/60, 100/Pack

Sanding Sponge Angled 125x85x25mm 120, 100/Pack

Sanding Sponge Diamond 85x50mm 180 Red

For sanding edges of tiles and stone, stripping paint of wood, repairing glass chips and edges, metal hand tools and blades as well as composites.

Sanding Sponge Diamond 85x50mm 400 Yellow

For sanding edges of tiles and stone, stripping paint of wood, repairing glass chips and edges, metal hand tools and blades as well as composites.

Sanding Sponge Diamond 85x50mm 60 Green

For sanding edges of tiles and stone, stripping paint of wood, repairing glass chips and edges, metal hand tools and blades as well as composites.

Sanding Sponge Displ Angl.125x85x25mm 80, 30/Pack

Screw Kit for DEROS/DEOS

Seal for DEOS 353/383

Seal for DEOS 663

Shark Blade 48x28mm CrN

A professional precision tool for removal of minor lacquer defects like dust enclosures and runs.

Shelf for Solution Trolley

Shelf for Solution Trolley

Shelf for Work Station for DE 1230/1242

The shelf for the work station for Mirka Dust Extractor 1230/1242 -series is ideal for storage of 4 x 150 mm disc boxes.

Soft Connector 25,4mm

Soft adapter for Vacuum hose Ø 25,4 mm x 4 m for 125/150 mm sanders.

Soft Sanding Pad 115x140mm 220 (SF), 20/pack

Sanding sponge for wood, paint, metal, glass fiber, coatings and composites. Both dry and wet sanding.

Soft Sanding Pad 115x140mm 120 (F), 20/Pack

Sanding sponge for wood, paint, metal, glass fiber, coatings and composites. Both dry and wet sanding.

Soft Sanding Pad 115x140mm 220, 1/Pack

Soft Sanding Pad 115x140mm 400 (UF), 20/Pack

Sanding sponge for wood, paint, metal, glass fiber, coatings and composites. Both dry and wet sanding.

Soft Sanding Pad 115x140mm 60 (M), 20/Pack

Sanding sponge for wood, paint, metal, glass fiber, coatings and composites. Both dry and wet sanding.

Soft Sanding Pad 115x140mm 600 (MF), 20/Pack

Sanding sponge for wood, paint, metal, glass fiber, coatings and composites. Both dry and wet sanding.

Solution Trolley

This trolley is developed to be used as a part in Mirka´s solution selling strategy. It has space for the Mirka dust extractor, abrasives, tools and polishing bottles. Abrasives can be put on the top level for easy availability. There are also two drawers and a locker for storage of tools and abrasives. There is a handle for a few polishing bottles and a holder for two random orbital sanders and one orbital square sander. The trolley has also a holder with space for three hoses. In addition to this the package contains assemble instructions, a tool and keys for the locker. The package size is 92 x 56 x 54 cm.

Spacer for DEOS, 20/Pack

SPACER INTERFACE MIRLON 148,5mm, 10/Pack

This unique interface provides great dust extraction when sanding with Mirka non-vowen products. The interface removes the need to use velour on a non-vowen product and thereby enables usage of both Mirlon and Mirlon Total, as discs or sheets when doing tool-sanding.The unique construction is based on a patented spacer backing.

SPACER INTERFACE MIRLON 148,5mm, 2/Pack

Speed Controller DEROS X 110V

Speed Controller for DEROS/DEOS 230V

Spindle + Bearing Assembly for LEROS

Sponge "Mirka", 10/Pack

Tvättsvamp för biltvätt.

Sponge 4-Sided 4"x2.75"x1" P180, 100/Box

Sanding sponge with a hard foam plastic core, entire surface coated with grains. Suitable for sanding 90 degree angles. Waterproof.

Sponge 4-Sided 4"x2.75"x1" P280, 100/Box

Start Button Kit for DEROS/DEOS

Store Rack Shelf 45x22 cm

This shelf is specially designed for the black Store rack 90x180 cm, code: BM9190114001.

Store Rack Tool Holder for Sander

This tool holder is specially designed for the black Store rack 90x180 cm, code: BM9190114001.

Store Rack Tool Holder for Wall Sander

This tool holder for a wall sander is specially designed for the black Store rack 90x180 cm, code: BM9190114001.

Swivel Exhaust for DEROS Black, 180º

Swivel Exhaust Kit for DEOS 353/383

Swivel Exhaust Kit for DEOS 663

Swivel Exhaust Kit for DEROS 125/150mm

Mirka DEROS electric sander accessory.

Swivel Exhaust Kit for DEROS 325/350

Tool Hook for Work Station for DE 1230/1242

Tool hook for Mirka® OS Mirka® CEROS /DEROS 125 mm, 150 mm Mirka® DEOS Suitable for the Work Station for DE 1230/1242. Is to be screwed onto the side of the work station.

Tube for LEROS

Twisted Wool Pad 150mm Grip

Twisted wool pad 6" 150 mm

Twisted Wool Pad 180mm Double Sided

Twisted wool pad 7,5" 180 mm double sided

Twisted Wool Pad 180mm Grip

Twisted wool pad 7,5" 180 mm

Type Label Kit for DEOS 353,383 220-240V

Type Label Kit for DEOS 353,383 220-240V CN

Type Label Kit for DEOS X 100-120V US

Type Label Kit for DEROS 325/350 220-240V

Type Label Kit for DEROS 350 110-120V

Type Label Kit for DEROS 550,625,650,680 220-240V

Type Label Kit for DEROS 625,650 220-240V CN

Type Label Kit for DEROS 650,680 220-240V ANZ

Type Label Kit for DEROS X 100-120V US

Vacuum Block Disc 150mm, 5/Pack

The vacuum block discs should be used if the vacuum dust extraction cannot be disconnected during wet sanding. The vacuum block disc protects your sander and dust extraction system, since it prevents moisture from entering the sander.

Vacuum Block Disc 77mm, 5/Pack

The vacuum block discs should be used if the vacuum dust extraction cannot be disconnected during wet sanding. The vacuum block disc protects your sander and dust extraction system, since it prevents moisture from entering the sander.

Waterspray Can 0,65 L

Waterspray Can

Work Station for DE 1230/1242

The work station for Mirka Dust Extractor 1230/1242-series is a compact shelf and hook system. The functional work station has dedicated space for Mirka cases and abrasives as well as hooks for machines and hose storage. The work station should be fastened to the dust extractor with the case fastening accessory for DE 1230/1242, that needs to be ordered separately. Note that pneumatic machines also need the Pneumatic Box for DE 1230/1242 230V.