ABRANET

The multifunctional and classic Abranet is especially developed for sanding putty, primers, lacquers, composite materials and a wide range of other materials for industrial use. Abranet combines high performance and a longer lifespan than traditional abrasives, making it a cost-effective solution. Designed for dry sanding by machine or by hand, its true dust-free sanding characteristics result in a cleaner work environment, as well as a better surface finish.

ABRANET ACE

Abranet Ace is developed for tougher and more demanding sanding applications. Because of its optimised net construction and ceramic grains, Abranet Ace offers superior cut and performance for hardwoods (such as beech and oak) and fast cutting on various solid surface materials as well as for cleaning of different industrial rollers. Abranet Ace also works excellent on primer sanding applications, creating an optimal performance and lifetime.

ABRANET ACE HD

Abranet Ace HD for dust-free sanding is durable and tough with ceramic grains. The strong net structure resists high wear and tear and the makes Abranet Ace HD ideal for heavy-duty applications. The improved woven mesh backing increases the lifetime of the abrasive, and makes the sanding process faster.

ABRANET MAX

Abranet Max is a universal product suited for a broad variety of sanding applications and is especially developed for the wood industry. Due to the net structure it does not easily clog up on resinous wood types or soft materials and the sanded surface stays cooler and avoids burning. The tough aluminium oxide grain gives a high cut rate on harder wood types and materials. The symmetric net structure enables an efficient cut and stock removal. Lower pressure is needed and a more consistent surface finish means minimal quality variations in the process when sanding with Abranet Max. The product offers an extreme long lifetime compared to conventional abrasive belts, which results in a lower amount of belts needed for the job and also cost savings and time efficiency because of less downtime in production due to changing of belts. The product is also well suited for applications where water is used as cooling agent.

ABRANET NC

Abranet NC has been developed for sanding of material that must not be contaminated with corrosive agents. The preparation of corrosion sensitive surfaces requires abrasive products which contain the lowest possible amount of heavy metals. Special procedures are applied throughout the production process of Abranet NC to reduce the metal content and ensure consistent quality. Due to the construction, Abranet NC has significantly lower heavy metal content than the corresponding traditional products. Abranet NC is suitable for sanding of aluminium and painted aluminium parts within the automotive industry.

ABRANET SIC NS

Abranet SIC NS is a multifunctional net abrasive without stearate, developed mainly for glass sanding, but is also suitable for sanding of other hard surfaces like primers, clear coats and composites. A combination of high performance and a longer lifespan than traditional abrasives gives a cost effective solution. The bonding is of resin type, and Abranet SIC NS is coated with an even, closed layer of silicon carbide grains.

ABRALON

Abralon is a unique, multifunctional sanding material developed for tackling both smooth and profiled surfaces. Its patented, flexible construction allows it to create a smooth sanding pattern on angled surfaces and edges while minimising the risk of pressure marks. The flexible weave also allows water and air to pass freely, making it suitable for both dry and wet sanding, by machine or by hand.

ABRALON E5

Abralon E5 is a unique, multifunctional sanding material developed for tackling both smooth and profiled surfaces. The patented, flexible construction allows it to create a smooth sanding pattern on angled surfaces and edges while minimizing the risk of pressure marks. The flexible weave allows water and air to pass freely, resulting in a cleaner sanding process and a long lasting abrasive.

ABRALON J3

Abralon J3 is a unique multifunctional Abralon abrasive for an ultrafine surface finish for both smooth and profiled surfaces. Abralon J3 has a higher density foam layer which is only 3 mm thick. Recommended for high gloss applications, leaving a very smooth surface prior to polish. Abralon J3 is suitable for all kinds of material, both smooth and profiled surfaces. The flexible weave allows water and air to pass freely, and makes it suitable for both dry and wet sanding.

ABRALON J5

Abralon J5 is a unique, multifunctional sanding material developed for tackling both smooth and profiled surfaces. Abralon J5 has a higher density foam layer which is 5 mm thick. The patented, flexible construction allows it to create a smooth sanding pattern on angled surfaces and edges while minimizing the risk of pressure marks. The flexible weave allows water and air to pass freely, resulting in a cleaner sanding process and a long lasting abrasive.

ABRASIVE RED

Durable, long-lasting abrasive suited for most purposes. Enables smooth and flexible sanding even on surfaces edges.

ALOX

Combining durability with flexibility, Alox is well suited to sanding by hand. With its excellent cutting qualities, this is an all-round sanding material that produces a high quality surface finish.

AUTONET

Specially developed for the automotive refinishing industry, Autonet is a new-age surface finishing solution offering speed, efficiency and an amazing dust extraction ability. The patented construction eliminates clogging and pilling and ensures a long lifespan, while other highlights include excellent initial aggressivity, reduced edge wear in finer grits and a versatile range to suit any application.

AVOMAX ANTISTATIC

An all-round product for various wood sanding applications. The open coating makes Avomax Antistatic especially efficient for sanding materials that clog easily. Works well for sanding soft materials and resinous wood types such as pine wood. The strong antistatic paper provides dimensionally accurate and reliable wide belts. Full resin bonding and aluminium oxide grain guarantee a very durable product.

BASECUT

Basecut is an economical, high-efficiency choice sanding paper. There's a host of productivity and efficiency features, including a high initial aggressive cut and a long working lifespan.

CARATFLEX

A stearate coated abrasive for dry sanding applications, Carat Flex features fine stock removal, a uniformed scratch pattern, a long lifespan and extremely good grain adherence. The backing consists of a flexible, impregnated latex paper which is ideal for profile sanding.

COARSE CUT

A specially reinforced backing material and Mirka's Progressive Bond™ dust binding technology, make Coarse Cut ideal for all kinds of coarse sanding work. Features include, flexibility on rounded surfaces, excellent edge wear resistance and minimal clogging.

COMBI

Combi features premium quality paper and cloth backing materials which produce a product with excellent edge wear resistance and durability that make it ideal for long-lasting machine sanding.

COPPER

Copper discs to be used together with the Remint™ abrasive compounds for permanent scratch removal from chemically strengthened glass.

FIBER A

Fiber discs are durable and flexible, suitable for sanding difficult surfaces. Fiber has firm dust binding properties which are needed when removing lacquer and rust or when sanding welding seams.

FIBER CER XF870

Durable and flexible Fiber discs has firm dust binding properties, which is needed when removing lacquer and rust or when sanding down welding seams.

FIBER ZIR

Durable and flexible Fiber discs has firm dust binding properties, which is needed when removing lacquer and rust or when sanding down welding seams. Fiber Zir is specially developed for high-pressure sanding.

GOLD

This durable, all-round sanding material is very well suited for high speed sanding in a multitude of applications. Gold features semi-open and special stearate coatings designed to prevent clogging and pill forming which helps achieve an optimal sanding result.

GOLD

This durable, all-round sanding material is very well suited for high speed sanding in a multitude of applications. Gold features semi-open and special stearate coatings designed to prevent clogging and pill forming which helps achieve optimal sanding results.

GOLD NC

Gold NC has been developed for sanding of material that must not be contaminated with corrosive agents. The preparation of corrosion sensitive surfaces requires abrasive products which contain the lowest possible amount of heavy metals. Special procedures are applied throughout the production process of Gold NC to reduce the metal content. The tough, latex-coated base paper makes Gold NC a balanced, flexible product with good initial aggressivity and good durability. Gold NC has a surface layer of calcium stearate that provides good clogging resistance when sanding aluminium and when sanding other materials with high clogging tendency. Gold NC is suitable for sanding of aluminium and painted aluminium parts within the automotive industry.

GOLD PROFLEX

Gold ProFlex is a stearate coated abrasive paper for dry hand sanding of wood, fillers, paints and lacquers. The backing consists of a flexible, impregnated latex paper that provides desired flexibility and conformity in profile sanding operations as well as on flat surfaces. The paper has a an anti-slip coating on the back side in order to provide good grip and feeling during the sanding. Gold ProFlex has aluminium oxide grain, which provides a good cut and an excellent scratch pattern.

GOLD SOFT

Gold Soft is a sanding disc, with optimal foam thickness. The semi-open grain coating gives a less dust clogging and better cutting performance. The soft backing gives an excellent paint finish. A softer disc edge eliminates damages on profile sanding. Gold Soft P500 is suitable for primer sanding applications and P800 for mattening clear coats. Gold Soft discs are launched in Mirka’s new packaging with an outstanding informative new yellow label.

GOLDEN FINISH SR

Microproduct for sanding small defects. Part of the Mirka Golden Finish System - the fast and simple post paint solution.

GOLDEN FINISH-1

Film product for sanding large surfaces. Part of the Mirka Golden Finish System - the fast and simple post paint solution.

GOLDEN FINISH-2

Foam product for conditioning of scratches. Part of the Mirka Golden Finish System - the fast and simple post paint solution.

GOLDFLEX SOFT

The soft and flexible Goldflex Soft has been developed for sanding profiled surfaces and irregular, difficult-to-reach details by hand. Goldflex Soft is especially useful within the automotive industry and the car repair branch. The foam base is grip friendly and applies pressure evenly, which reduces the risk of sanding through the surface. The special stearate coating prevents clogging. Suitable for both dry and wet sanding.

HIFLEX

Designed for automotive and wood applications, Hiflex features Mirka's Progressive Bond™ binding technology which makes it flexible and tear resistant, whilst ensuring a high stock removal and excellent results. It's suitable for hand sanding operations and is available in sheets and rolls.

HIOLIT JF

Hiolit JF is targeted towards wood and metal sanding applications. The flexible cloth backing makes it optimal for profile sanding, seams, edges and other applications where a flexible abrasive with high edge wear is needed. The semi-open coating makes Hiolit JF a universal abrasive, especially well suited for soft and clogging materials.

HIOLIT XO

Hiolit XO is a semi-open stiff universal abrasive for belt sanding and other machine sanding where it has excellent edge wear resistance and durability. In particular, it produces high quality results on challenging materials – for example, grits 36–80 are suitable for aggressive sanding, such as severe rust damage, as well as other sanding operations where large amounts of material need to be removed.

HIOMANT

Suitable for sanding by hand or light machine, Hiomant offers effective stock removal and sanding results, combined with long term durability thanks to excellent edge wear resistance and minimal clogging.

IRIDIUM

Iridium is a premium paper abrasive for universal sanding. Perfected for speed and efficiency, it has a mix of ceramic and aluminium oxide grains on a flexible paper with precision coating that prevents clogging and reduces pilling. It practically repels dust and lifetime is increased as the grains stay sharp for longer. Dust extraction is optimised with multihole patterns for discs and strips. Iridium delivers amazing results on both soft and hard surfaces, making it the ideal paper abrasive choice for professionals in any industry.

JEPUFLEX ANTISTATIC

A high class abrasive with a wide application area. The focus of the optimization work has been the sanding of hard wood such as beech, birch and oak. The strong antistatic paper provides dimensionally accurate and reliable wide belts. Full resin bonding and aluminium oxide grain guarantee a very durable product. Silicon carbide grain used in the coarsest grit gives extra strength to the product. These qualities together with a well adjusted coating density make Jepuflex Antistatic a genuine all-round product that works well also on metal, plastic and lacquer.

MI231A 3MIL

This new micro-finishing film product is designed for the surface finishing of industrial rollers and automotive parts (crankshafts and camshafts). Depending on the application, there are two thicknesses of anti-slip backing film material available, 3MIL or 5MIL.

MI231A 5MIL

This new micro-finishing film product is designed for the surface finishing of industrial rollers and automotive parts (crankshafts and camshafts). Depending on the application, there are two thicknesses of anti-slip backing film material available, 3MIL or 5MIL.

MI231C CC 5MIL

This new micro-finishing film product is designed for the surface finishing of industrial rollers. The material is available on a 5MIL antislip backing. MI231C is manufactured to the highest standard using the most technically advanced materials and processes, capable of producing a consistently high quality film product. MI231C has a semi open grain distribution. Application can be wet with lubricants or dry.

MI231G 3MIL

This new micro-finishing film product is designed for the surface finishing of industrial rollers, with a focus on softer surfaces. Depending on the application, there are two thicknesses of anti-slip backing film material available, 3MIL or 5MIL.

MI231G 5MIL

This new micro-finishing film product is designed for the surface finishing of industrial rollers, with a focus on softer surfaces. Depending on the application, there are two thicknesses of anti-slip backing film material available, 3MIL or 5MIL.

MI232C 5MIL

This new micro-finishing film product is designed for the surface finishing of industrial rollers and automotive parts (crankshafts and camshafts). The material is available on a 5MIL anti-slip backing. MI232C is manufactured to the highest standard using the most technically advanced materials and processes, capable of producing a consistently high quality film product. MI232C has a semi open grain distribution, which in combination with a designed cross pattern* makes the product resist surface loading and produce consistently fine surface scratch patterns during use. Application can be wet with lubricants or dry.

MI241D

This slurry-coated diamond film product is designed for very hard surfaces such as carbide, ceramics, composites and hardened metals. MI241D is manufactured with precisely graded diamonds producing a consistently high quality film product, and has a smooth and strong polyester film backing to provide a consistent surface finish. Available in a 5 MIL film in grit 60µ and in a 3 MIL film in grits 45µ, 30µ, 15µ, 9µ and 3µ. The grits are colour-coded.

MICROSTAR

This new abrasive film product, Microstar, is designed for mattening and paint rectification of top- and clear coat applications. Microstar has a special stearate layer and a smooth film backing. This product has a high quality finish and lasts longer as it doesn’t clog as easily as traditional products. Microstar produces a fine scratch pattern that is easy to polish out. For a perfect result, it is recommended to use Microstar with a 5 mm interface pad. Microstar is developed for dry sanding only.

MIRKA YELLOW ABRASIVE SOFT GRIP

Ideal for plaster sanding and compatible with the most common wall sanders. Mirka Yellow Abrasives Soft is a 225 mm paper disc with 27 holes and a flexible fleece backing. The soft backing gives the operator a smooth sanding experience and minimises the risk for mistakes.

MIRKON

A tough and durable sanding material, Mirkon is perfectly suited to the aggressive machine sanding of metal. Thanks to its polyester based cloth material it's highly durable and can take plenty of tough treatment. It's also very aggressive for calibration sanding.

MIRLON

Thanks to its special structure, Mirlon is a flexible, three-dimensional fibre sanding material that's easy to use on profiled surfaces and produces an excellent finish. It's ideal for matting of surfaces and creates an excellent base for the next lacquer layer.

MIRLON NC

Can be used for matting of aluminium and painted aluminium parts. It can be used wet as well as dry. Mirlon NC is a grain-coated non-woven abrasive, suitable for both hand sanding and machine sanding in processes where the sanded material must not become contaminated by corroding agents. Thanks to the three-dimensional construction and the high flexibility the Mirlon NC is easy to use on rounded surfaces and profiles.

MIRLON TOTAL

Developed using Mirka's innovative Total Coating™ Technology, Mirlon Total is more aggressive than Mirlon and produces a dense scratch pattern and rapid result. Suitable for use in wet and dry modes, it features an open and flexible structure and strengthened fibres which make it strong and long-lasting.

MIROX

This universal paper for sanding by hand is economical to use and has a flexible construction which makes Mirox suitable for sanding both flat and profiled surfaces. The semi-open coating prevents clogging and guarantees a high quality surface finish.

NOVASTAR

Novastar is a premium film abrasive that tackles demanding applications with unexpected ease. It has a mix of ceramic and aluminium oxide grains on a flexible film backing, with a precision coating that practically repels dust. The grains stay sharp as clogging is prevented. Great durability and excellent edge wear resistance. Dust extraction optimised with multihole pattern. Fully waterproof. Novastar delivers remarkable results, especially on hard surfaces. Outstanding performance makes it the ideal film abrasive choice for professionals in any industry.

NOVASTAR SR

The Novastar SR spot repair disc is a unique finessing solution, made with a new manufacturing technology which enables a precise grain distribution and thus a consistent scratch pattern. They are easy to use, with minimal loading and pilling. These durable, flexible and long-lasting discs gives an excellent surface finish, making the polishing faster and easier.

OSP

As the name suggests, the Optimized Surface Preparation targets the entire process and this is a decisive factor. As well as maximizing the performance of every individual phase of the process, each step has also been optimized to work perfectly with all the other steps. Mirka’s OSP abrasives are clearly marked with numbers, making it easy to know which disc or strip should be used for each step. Number 1 is used for paint removal, number 2 for feather edge, number 3 for preparing the repaired area for primer by reducing scratches and expanding the feather edge and number 4 for finalising the sanding.

POLARSTAR

Developed to efficiently tackle the latest demanding coatings applications, Polarstar quickly produces a fine, consistent surface finish and combines that with superb durability due to an excellent resistance to clogging. The polyester film backing material creates a more flexible and much smoother abrasive surface, compared to paper backing. In particular, it offers outstanding performance on hard tooling gelcoats and scratch resistant clearcoats.

POLARSTAR SR

Polarstar SR is the first in a series of new high technology micro products produced by Mirka. This innovation curing technology is energy saving with a low carbon footprint. This new sanding film is mainly developed for spot repair, used at car plants in the finessing- and hospital area of the paint shops. The Polarstar SR products are also used in the automotive refinish processes. This product is primarily designed for wet sanding, for correction of small painting defects and removing of dust particles in top coats and clear coats. Suitable for both machine and hand sanding.

Q.SILVER

With a backing consisting of a flexible and strong impregnated latex paper, Q-Silver features optimal aggressivity, resulting in fast and efficient stock removal. The high heat endurance of this fully resin bonded abrasive makes it ideal for tough tasks, such as 'down-to-metal' sanding operations.

SICA CLOSED

Designed for belt sanding and sanding of MDF and other materials containing mineral debris, Sica Closed is a fully anti-static product that's suitable for materials covered with water-based surface treatment coatings. It maintains its shape well and the silicon carbide grains produce less fibre rising and a finer scratch pattern than products using aluminium oxide grains. The result is a smoother sanded surface and a better final finish after surface treatment.

SICA FINE

Sica Fine is a fully anti-static product which minimises dust load and helps produce a high-quality surface finish. For example, it results in a perfect finish after surface treatment with a top lacquer - it even minimises lacquer usage.

SICA FINE STEARATE

Sica Fine Stearate is a fully anti-static, 'stearate' product which produces minimal dust load and a high-quality surface finish. For example, you can expect a perfect result after surface treatment with a top lacquer - it even minimises lacquer using. Also available as Sica Fine without stearate.

SICA COARSE

Thanks to its ability to maintain even stock remove over its lifespan, Sica Coarse is ideal for calibration sanding of wood and MDF. Silicon carbide grains provide long lasting durability when performing heavy sanding operations and the open coating and anti-static characteristics minimise dust loading and prevent clogging.

SICA OPEN

Sica Open is the recommended solution for sanding soft, resin-rich wood types. The open coating and completely anti-static backing material and layers limit dust loading and prevent clogging which improves product lifespan. In addition, silicon carbide grains produce a smoother scratch pattern and a higher surface gloss level than aluminium-oxide based sanding materials.

ULTIMAX

Manufactured using a unique production process called ‘Selective Coating® Technology’ Ultimax features a series of tiny cavities designed into the abrasive material which work to efficiently prevent clogging. This innovative technology, along with special abrasive grains, produces aggressive performance and excellent edge wear resistance while keeping the sanding surface cool. Together these features ensure a longer lifespan and reduced material usage per job.

WPF

Mirka Waterproof corrective sanding discs and roses for wet sanding plastics, lacquers and composite materials providing a high-quality sanding finish.

WPF

The recommended product for the manual wet sanding of plastics, lacquers and composite materials, Mirka WPF features a latex impregnated paper backing material and extra durable coating which helps produce a high quality finish, even on coarser surfaces.

WPF NEXT GEN.

WPF Next Gen is the ideal paper abrasive for effective hand sanding both wet and dry on multiple surfaces. It is very flexible, fully waterproof and has great grain adhesion. Produced with new coating technology, the abrasive surface does not clog up easily, so you can sand faster and the abrasive lasts longer. Especially recommended for automotive refinishing due to the consistent surface finish. The finer grits are optimal for fresh clear coats and make polishing easier.